Bravo Company USA

Bravo Company USA
View as List Grid

Items 1-50 of 141

Page
per page
Set Descending Direction
In Stock
  1. BCM-1913LM-KM : BCMGUNFIGHTER™ 1913 Light Mount Modular - KeyMod
    • Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
    • Optional high and low mounting position for the 1913 rail section.
    • Fits most common 1913-rail pistol/weapon light systems
    • Multiple mounting holes for ideal placement.
    • Designed to mount on the 3 or 9 o'clock rail positions.
    • Durable Aluminum construction. Intently designed to be low-profile and snag-free
    • Patent Pending mounting system
    • Minimal added weight, 0.9 oz.
    • BCM US Patent Number 9,377,274
    Learn More
  2. BCM-1913LM-MCMR : BCMGUNFIGHTER 1913 Light Mount Modular - (M-LOK®)
    • Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
    • Optional high and low mounting position for the 1913 rail section.
    • Fits most common 1913-rail pistol/weapon light systems
    • Multiple mounting holes for ideal placement.
    • Designed to mount on the 3 or 9 o'clock rail positions.
    • Durable Aluminum construction. Intently designed to be low-profile and snag-free
    • Patent Pending mounting system
    • Minimal added weight, 0.9 oz.
    Learn More
  3. BCM-A2X : BCM A2X Flash Hider
    Bravo Company USA, Inc
    BCM-A2X : BCM A2X Flash Hider

    The A2XT is an extended version of the A2 flash hider found on the M16 and M4 series of rifles.

    • Threaded 1/2"x 28 for your 5.56mm carbine.
    • Machined from 4150 steel.
    • Phosphate coated per MIL-STD-171.
    • Predrilled hole at the base for permanent installation.

    When mounted per BATF specifications for a permanent installation it will bring your 14.5" M4 barrel to a non-NFA length of over 16.1".

    Installation should be done by a qualified gunsmith familiar with BATF regulations.

    The A2XT is predrilled and comes with a dowel pin and crush washer for installation.
    Made by Bravo Company MFG, Inc. (BCM®).

    Learn More
  4. BCM-BCG-AUTO-MP-FDE-IB : BCM Bolt Carrier Group (MPI) - Auto - FLAT DARK EARTH-IB

    Stripped carrier is finished in an Ion Bonded Flat Dark Earth. Lowers friction and cleans easier.

    BCM® (MPI) complete bolt carrier group is fully assembled. (BCG)

    Learn More
  5. BCM-BOLT-CARRIER-GROUP-AUTO-MP : BCM Bolt Carrier Group (MPI) - Auto

    BCM® (MPI) complete bolt carrier group is fully assembled. (BCG)

    Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI specifications. This M16/M4 carrier includes the proper Mil-Spec gas key. Gas key is chrome lined and heat treated per GI specifications. Gas key is secured to carrier via USGI domestic mfg Grade 8 fasteners and properly staked per Mil-Specs. These properly hardened parts insure a strong staking and proper gas system functioning.
    The bolt assembly is machined from the correct Mil-Spec Carpenter No. 158® steel, shot peened for increased strength, includes tool steel machined extractor and ejector, BCM Extractor Spring, and is HPT (High Pressure Tested) and MPI (Magnetic Particle Inspected).

    Prior to shipping, all BCM Bolt Carrier Groups are test fired for function. As such, the Bolt Carrier Group will show handling marks consistent with these quality control procedures.

    Learn More
  6. BCM-ELPK-BLK : BCMGUNFIGHTER™ AR-15 Enhanced Lower Parts Kit - Black

    This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include:

    • BCM PNTT Trigger Assembly
    • BCM Pistol Grip, Mod 3
    • BCM Enhanced Trigger Guard

    In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

    BCM PNTT Trigger Assembly (Polished - Nickel - Teflon).

    BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

    The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

    After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

    Polished

    The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

    Nickel

    An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

    Teflon

    Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

    This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

    The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
    The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

    Bolt Catch and Safety Selector

    The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
    The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

    BCM Magazine Catch

    The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.

    The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

    BCM Rear Takedown Pin and Front Pivot Pin

    BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

    BCM Detents and Springs

    Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

    Learn More
  7. BCM-ELPK-FDE : BCMGUNFIGHTER™ AR-15 Enhanced Lower Parts Kit - Flat Dark Earth

    This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include:

    • BCM PNTT Trigger Assembly
    • BCM Pistol Grip, Mod 3
    • BCM Enhanced Trigger Guard

    In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

    BCM PNTT Trigger Assembly (Polished - Nickel - Teflon).

    BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

    The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

    After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

    Polished

    The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

    Nickel

    An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

    Teflon

    Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

    This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

    The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
    The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

    Bolt Catch and Safety Selector

    The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
    The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

    BCM Magazine Catch

    The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.

    The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

    BCM Rear Takedown Pin and Front Pivot Pin

    BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

    BCM Detents and Springs

    Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

    Learn More
  8. BCM-ELPK-FG : BCMGUNFIGHTER™ AR-15 Enhanced Lower Parts Kit - Foliage Green

    This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;
     BCM PNTT Trigger Assembly
     BCM Pistol Grip, Mod 3
     BCM Enhanced Trigger Guard

    In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

    BCM PNTT Trigger Assembly (Polished - Nickel - Teflon)
    BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.
    The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.
    After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

    Polished
    The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

    Nickel
    An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

    Teflon
    Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

    This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.
    The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
    The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

    Bolt Catch and Safety Selector
    The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
    The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

    BCM Magazine Catch
    The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.
    The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

    BCM Rear Takedown Pin and Front Pivot Pin
    BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

    BCM Detents and Springs
    Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

    Learn More
  9. BCM-ELPK-WG : BCMGUNFIGHTER™ AR-15 Enhanced Lower Parts Kit - Wolf Gray

    This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;
     BCM PNTT Trigger Assembly
     BCM Pistol Grip, Mod 3
     BCM Enhanced Trigger Guard

    In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

    BCM PNTT Trigger Assembly (Polished - Nickel - Teflon)
    BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.
    The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.
    After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

    Polished
    The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

    Nickel
    An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

    Teflon
    Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

    This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.
    The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
    The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

    Bolt Catch and Safety Selector
    The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
    The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

    BCM Magazine Catch
    The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.
    The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

    BCM Rear Takedown Pin and Front Pivot Pin
    BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

    BCM Detents and Springs
    Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

    Learn More
  10. BCM-EPM4-QD : BCMGUNFIGHTER™ QD End Plate
    • BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.
    • Machined from steel, and easily accommodates staking.
    • Like all BCM® products, Made with pride in the U.S.A.
    Learn More
  11. BCM-EXSPRING-1 : BCM Extractor Spring Upgrade Kit

    The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.

    As with all BCM branded products, the highest quality is the primary focus. Our BCM Extractor Spring is manufactured by a 9001:2000 facility employing the latest precision equipment. BCM starts with only the highest quality chrome silicon material, heat treats to stress relieve the product and shot peens to add increased strength.

    This kit also includes the new black extractor insert, standard on all M4, M4A1, Mk18 carbines and the recent new standard on M16A4 rifles. The BCM Extractor Spring is so strong the Mil-Spec Crane O-Ring will probably not be needed, but it is included.

    This kit includes:

    • BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
    • Crane Ind O-Ring (Mil-Spec)
    • Black Extractor Insert
    Learn More
  12. BCM-EXSPRING-3 : BCM Extractor Spring Upgrade Kit - 3 Pack

    The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.

    As with all BCM branded products, the highest quality is the primary focus. Our BCM Extractor Spring is manufactured by a 9001:2000 facility employing the latest precision equipment. BCM starts with only the highest quality chrome silicon material, heat treats to stress relieve the product and shot peens to add increased strength.

    This kit also includes the new black extractor insert, standard on all M4, M4A1, Mk18 carbines and the recent new standard on M16A4 rifles. The BCM Extractor Spring is so strong the Mil-Spec Crane O-Ring will probably not be needed, but it is included.

    This kit includes:

    • BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
    • Crane Ind O-Ring (Mil-Spec)
    • Black Extractor Insert
    Learn More
  13. BCM-GFC-MOD-0-556 : BCMGUNFIGHTER™ Compensator Mod 0 - 5.56

    This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

    The BCMGUNFIGHTER Compensator Mod 0-5.56.

    • Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors.
    • Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
    • Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
    • Nitride treated for maximum corrosion resistance
    • Includes a Crush Washer
    • Should be installed by a qualified armorer.

    Threaded 1/2 x 28 for 5.56mm AR15 platforms.

    Learn More
  14. BCM-GFC-MOD-1-556 : BCMGUNFIGHTER™ Compensator Mod 1 - 5.56

    This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

    The BCMGUNFIGHTER Compensator Mod 1-5.56

    • Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
    • Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
    • Stainless Steel construction for maximum corrosion resistance
    • Predrilled hole at the base for permanent installation.
    • Includes a Crush Washer
    • Should be installed by a qualified armorer.

    Threaded 1/2 x 28 for 5.56mm AR15 platforms.

    Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer"s wrench or box wrench is too thick.

    Extended version of the BCMGUNFIGHTER MOD 0 - 5.56.

    Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

    Learn More
  15. BCM-GFC-MOD-1-762 : BCMGUNFIGHTER™ Compensator Mod 1 - 7.62

    This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

    The BCMGUNFIGHTER Compensator Mod 1-7.62 / 300 AAC Blackout.

    • Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
    • Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
    • Stainless Steel construction for maximum corrosion resistance
    • Includes a Crush Washer
    • Should be installed by a qualified armorer.

    Threaded 5/8 x 24 for 7.62mm AR10 and many 300 AAC® Blackout® barrels.

    Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer"s wrench or box wrench is too thick.

    Learn More
  16. BCM-GFG-MOD-0-BLK : BCMGUNFIGHTER™ Grip Mod 0 - Black

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made in the USA

    Learn More
  17. BCM-GFG-MOD-0-FDE : BCMGUNFIGHTER™ Grip Mod 0 - Flat Dark Earth

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made in the USA

    Learn More
  18. BCM-GFG-MOD-0-FGRN : BCMGUNFIGHTER™ Grip Mod 0 - Foliage Green

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made in the USA

    Learn More
  19. BCM-GFG-MOD-1-BLK : BCMGUNFIGHTER™ Grip Mod 1 - Black

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  20. BCM-GFG-MOD-1-FDE : BCMGUNFIGHTER™ Grip Mod 1 - Flat Dark Earth

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  21. BCM-GFG-MOD-1-FGRN : BCMGUNFIGHTER™ Grip Mod 1 - Foliage Green

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  22. BCM-GFG-MOD-2-BLK : BCMGUNFIGHTER™ Grip Mod 2 - Black

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  23. BCM-GFG-MOD-2-FDE : BCMGUNFIGHTER™ Grip Mod 2 - Flat Dark Earth

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  24. BCM-GFG-MOD-2-FGRN : BCMGUNFIGHTER™ Grip Mod 2 - Foliage Green

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  25. BCM-GFG-MOD-3-BLK : BCMGUNFIGHTER™ Grip Mod 3 - Black

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  26. BCM-GFG-MOD-3-FDE : BCMGUNFIGHTER™ Grip Mod 3 - Flat Dark Earth

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  27. BCM-GFG-MOD-3-FGRN : BCMGUNFIGHTER™ Grip Mod 3 - Foliage Green

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  28. BCM-GFG-MOD-3-WG : BCMGUNFIGHTER™ Grip Mod 3 - Wolf Gray

    Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

    Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

    The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

    Made In the USA

    Learn More
  29. BCM-GFS-MOD-0-BLK : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - Black

    The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

    Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.

    Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.

    Increasingly, this is the most common application when operating inside a vehicle.

    2 different types of ambidextrous sling mounting options, including QD swivel sockets.

    Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.

    Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

    Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    United States Patent Number: 9,109,855

    Learn More
  30. BCM-GFS-MOD-0-FDE : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - Flat Dark Earth
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    United States Patent Number: 9,109,855

    Learn More
  31. BCM-GFS-MOD-0-FG : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - Foliage Green
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    United States Patent Number: 9,109,855

    Learn More
  32. BCM-GFS-MOD-0-WG : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - Wolf Gray
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    United States Patent Number: 9,109,855

    Learn More
  33. BCM-GFS-MOD0-SPMD-BLK : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - SOPMOD - (Widebody) -Black

    Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

    The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

    • More pronounced cheekweld (SOPMOD type)
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the mostcommon application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth.

    United States Patent Number: 9,109,855

    Learn More
  34. BCM-GFS-MOD0-SPMD-FDE : BCMGUNFIGHTER™ Stock Assembly - Mod 0 - SOPMOD - (Widebody) -Flat Dark Earth

    Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

    The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

    • More pronounced cheekweld (SOPMOD type)
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the mostcommon application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth.

    United States Patent Number: 9,109,855

    Learn More
  35. BCM-GFSK-MOD-0-BLK : BCMGUNFIGHTER™ Stock Kit - Mod 0 - Black
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate

    As all BCM products, ALL parts are Made in the USA.

    United States Patent Number: 9,109,855

    Learn More
  36. BCM-GFSK-MOD-0-FDE : BCMGUNFIGHTER™ Stock Kit - Mod 0 - Flat Dark Earth
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate

    As all BCM products, ALL parts are Made in the USA.

    United States Patent Number: 9,109,855

    Learn More
  37. BCM-GFSK-MOD-0-FG : BCMGUNFIGHTER™ Stock Kit - Mod 0 - Foliage Green
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate

    As all BCM products, ALL parts are Made in the USA.

    United States Patent Number: 9,109,855

    Learn More
  38. BCM-GFSK-MOD-0-WG : BCMGUNFIGHTER™ Stock Kit - Mod 0 - Wolf Gray
    • The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the most common application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate

    As all BCM products, ALL parts are Made in the USA.

    United States Patent Number: 9,109,855

    Learn More
  39. BCM-GFSK-MOD0-SPMD-BLK : BCMGUNFIGHTER™ Stock Kit- Mod 0 - SOPMOD - (Widebody) -Black

    The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

    • More pronounced cheekweld (SOPMOD type)
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the mostcommon application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate
    Learn More
  40. BCM-GFSK-MOD0-SPMD-FDE : BCMGUNFIGHTER™ Stock Kit - Mod 0 - SOPMOD - (Widebody) -Flat Dark Earth

    The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

    • More pronounced cheekweld (SOPMOD type)
    • Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
    • Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
    • Increasingly, this is the mostcommon application when operating inside a vehicle.
    • 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
    • Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
    • Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
    • Available in Black, Flat Dark Earth.

    Also includes:

    • BCM 7075T6 Mil-Spec Receiver Extension
    • Locking Nut M4 (Castle)
    • Mil-Spec Carbine Action Spring
    • Carbine Buffer
    • BCM QD Swivel Mount End Plate
    Learn More
  41. BCM-GFVG-BLACK : BCMGUNFIGHTER™ Vertical Grip - Black
    • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
    • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
    • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
    • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
    • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
    • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
    • Reversible clamps allow user to setup fasteners to reside on either side.
    • Spring-loaded clamp makes installation and removal easier.
    • Available in popular colors such as: Black, Flat Dark Earth (FDE) and Foliage Green.
    • Manufactured from high quality impact resistant polymers.

    Made in the USA

    Note: Test fit to ensure proper function (may display attributes consistent with this QC process).

    Learn More
  42. BCM-GFVG-FDE : BCMGUNFIGHTER™ Vertical Grip - Flat Dark Earth
    • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
    • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
    • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
    • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
    • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
    • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
    • Reversible clamps allow user to setup fasteners to reside on either side.
    • Spring-loaded clamp makes installation and removal easier.
    • Available in popular colors such as: Black, Flat Dark Earth (FDE) and Foliage Green.
    • Manufactured from high quality impact resistant polymers.

    Made in the USA

    Note: Test fit to ensure proper function (may display attributes consistent with this QC process).

    Learn More
  43. BCM-GFVG-FGRN : BCMGUNFIGHTER™ Vertical Grip - Foliage Green
    • Mounted in forward angle increases rigidity of forearm, while providing more natural wrist angle when grabbing the vertical grip.
    • Mounted in reverse angle to increase control when grabbing handguard and vertical grip.
    • Flat sides give better yaw control to the shooter during firing and non-firing manipulations.
    • Aggressive texture and generous storage volume combined with modular design to allow improvements and adaptation in the future.
    • Cross bolt designed to work with improvised tools (such as a quarter) allow for easy adjustment or re-tightening.
    • Hinged trap door offering storage inside the grip with a water resistant rubber gasket.
    • Reversible clamps allow user to setup fasteners to reside on either side.
    • Spring-loaded clamp makes installation and removal easier.
    • Available in popular colors such as: Black, Flat Dark Earth (FDE) and Foliage Green.
    • Manufactured from high quality impact resistant polymers.

    Made in the USA

    Note: Test fit to ensure proper function (may display attributes consistent with this QC process).

    Learn More
  44. BCM-GTG-MOD-0-BLK : BCMGUNFIGHTER™ Trigger Guard Mod 0 - Black

    The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

    • Ergonomically correct shape and contour
    • No sharp edges, which enhances shooter's comfort
    • Compatible with "duck-billed" grips
    • Made of impact resistant polymer
    • Like all BCM® products- Made in the USA
    • Includes set screw and roll pin

    Note: Professional installation by a qualified gunsmith is required.

    Learn More
  45. BCM-GTG-MOD-0-FDE : BCMGUNFIGHTER™ Trigger Guard Mod 0 - Flat Dark Earth

    The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

    • Ergonomically correct shape and contour
    • No sharp edges, which enhances shooter's comfort
    • Compatible with "duck-billed" grips
    • Made of impact resistant polymer
    • Like all BCM® products- Made in the USA
    • Includes set screw and roll pin

    Note: Professional installation by a qualified gunsmith is required.

    Learn More
  46. BCM-GTG-MOD-0-FG : BCMGUNFIGHTER™ Trigger Guard Mod 0 - Foliage Green

    The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

    • Ergonomically correct shape and contour
    • No sharp edges, which enhances shooter's comfort
    • Compatible with "duck-billed" grips
    • Made of impact resistant polymer
    • Like all BCM® products- Made in the USA
    • Includes set screw and roll pin

    Note: Professional installation by a qualified gunsmith is required.

    Learn More
  47. BCM-GTG-MOD-0-WG : BCMGUNFIGHTER™ Trigger Guard Mod 0 - Wolf Gray

    The BCMGUNFIGHTERT Trigger Guard, AR-15 Type Series Trigger Guard, Mod 0.

    • Ergonomically correct shape and contour
    • No sharp edges, which enhances shooter's comfort
    • Compatible with "duck-billed" grips
    • Made of impact resistant polymer
    • Like all BCM® products- Made in the USA
    • Includes set screw and roll pin

    Note: Professional installation by a qualified gunsmith is required.

    Learn More
  48. BCM-KAG-1913-BLK : BCMGUNFIGHTER™ Kinesthetic Angled Grip - Picatinny - Black

    The KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry. Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions.

    The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories. Most of the industry relies on a simple screw and backing nut for a mounting system. BCM® has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM® direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface.

    Direct Attach Picatinny 1913 Rail Version:

    • Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard support
    • Works as a rest for supported firing positions
    • Slight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguard
    • Small profile is just enough to get repeatable hand position on weapon for-end
    • Innovative patent pending attachment method allows for robust clamping and alignment with minimal hardware and slender accessory size
    • Textured in front and back for positive engagement
    • Made from high quality, impact resistant polymers.

    Made in the USA.

    Learn More
View as List Grid

Items 1-50 of 141

Page
per page
Set Descending Direction
In Stock
© 2019 Gravel Agency Store. All Rights Reserved.