VLTOR

VLTOR
View as List Grid

Items 1-50 of 246

Page
per page
Set Descending Direction
In Stock
  1. A5H0 : A5 Light-Weight Buffer, 3.8 oz.

    cFor the operator that requires a specially weighted buffer or wants to fine tune their weapon, the VLTOR A5 buffers come in five unique weights.  These buffers are only compatible with other VLTOR A5 products.

    Learn More
  2. A5H1 : A5 Light-Weight Buffer, 4.56 oz.

    cFor the operator that requires a specially weighted buffer or wants to fine tune their weapon, the VLTOR A5 buffers come in five unique weights.  These buffers are only compatible with other VLTOR A5 products.

    Learn More
  3. A5H2 : A5 Standard-Weight Buffer, 5.3 oz.

    For the operator that requires a specially weighted buffer or wants to fine tune their weapon, the VLTOR A5 buffers come in five unique weights.  These buffers are only compatible with other VLTOR A5 products.

    • VLTOR patented design
    • Body of the buffer is 7075 T6 aluminum
    • Mil-Spec Type III clear hard coat anodized
    • 5.3oz
    Learn More
  4. A5H3 : A5 Heavy-Weight Buffer, 6.08 oz.

    cFor the operator that requires a specially weighted buffer or wants to fine tune their weapon, the VLTOR A5 buffers come in five unique weights.  These buffers are only compatible with other VLTOR A5 products.

    Learn More
  5. A5H4 : A5 Heavy-Weight Buffer, 6.83 oz.

    For the operator that requires a specially weighted buffer or wants to fine tune their weapon, the VLTOR A5 buffers come in five unique weights.  These buffers are only compatible with other VLTOR A5 products.

    • VLTOR patented design
    • Body of the buffer is 7075 T6 aluminum
    • Mil-Spec Type III clear hard coat anodized
    • 6.83oz
    Learn More
  6. AEB-C-B : Commercial EMod:  Fits 1.170 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate
    • and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  7. AEB-C-G : Commercial EMod:  Fits 1.170 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate
    • and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  8. AEB-C-T : Commercial EMod:  Fits 1.170 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate
    • and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  9. AEB-M-B : MilSpec EMod: Fits 1.150 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  10. AEB-M-G : MilSpec EMod: Fits 1.150 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  11. AEB-M-T : MilSpec EMod: Fits 1.150 Diameter Rec. Ext.

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  12. AEBK-A5-B : Basic Combo Kit ( Milspec Diameter "A5" Conversion Kit)

    The VLTOR A5 Stock Combo Kit is not just an EMOD stock with M4 components; it was developed as a completely new operating system.

    Specifically developed on the request of the USMC, the A5 combo kit is considered to be the most innovative upgrade for the AR platform, increasing the reliability, accuracy and performance of any weapon.

    • Brings down cyclic rate of M4 carbines
    • Lowers bolt carrier velocity
    • Improves reliability and accuracy
    • Reduces felt recoil
    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.
    • Seven position Mil-Spec impact extruded receiver extension specifically used for the A5 system
    • Kit includes: VLTOR A5H2 buffer weighing 5.3oz and rifle spring, seven position receiver extension, lock plate, lock nut and VLTOR EMOD stock
    Learn More
  13. AEBK-A5-G : Basic Combo Kit* ( Milspec Diameter "A5" Conversion Kit)

    The VLTOR A5 Stock Combo Kit is not just an EMOD stock with M4 components; it was developed as a completely new operating system.

    Specifically developed on the request of the USMC, the A5 combo kit is considered to be the most innovative upgrade for the AR platform, increasing the reliability, accuracy and performance of any weapon.

    • Brings down cyclic rate of M4 carbines
    • Lowers bolt carrier velocity
    • Improves reliability and accuracy
    • Reduces felt recoil
    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.
    • Seven position Mil-Spec impact extruded receiver extension specifically used for the A5 system
    • Kit includes: VLTOR A5H2 buffer weighing 5.3oz and rifle spring, seven position receiver extension, lock plate, lock nut and VLTOR EMOD stock
    Learn More
  14. AEBK-A5-T : Basic Combo Kit* ( Milspec Diameter "A5" Conversion Kit)

    The VLTOR A5 Stock Combo Kit is not just an EMOD stock with M4 components; it was developed as a completely new operating system.

    Specifically developed on the request of the USMC, the A5 combo kit is considered to be the most innovative upgrade for the AR platform, increasing the reliability, accuracy and performance of any weapon.

    • Brings down cyclic rate of M4 carbines
    • Lowers bolt carrier velocity
    • Improves reliability and accuracy
    • Reduces felt recoil
    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.
    • Seven position Mil-Spec impact extruded receiver extension specifically used for the A5 system
    • Kit includes: VLTOR A5H2 buffer weighing 5.3oz and rifle spring, seven position receiver extension, lock plate, lock nut and VLTOR EMOD stock
    Learn More
  15. AEBK-M-B : Basic Combo Kit ( Milspec Diameter Only)

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  16. AEBK-M-G : Basic Combo Kit* ( Milspec Diameter Only)

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  17. AEBK-M-T : Basic Combo Kit* ( Milspec Diameter Only)

    The VLTOR EMOD provides a variety of enhancements in comparison to other stocks. The increased length is a major benefit for those weapons using scoped rifles, as it increases the available comb for any length of pull.

    The EMOD is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural.

    • Waterproof side battery compartments that holds 4 CR123 or three AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA batteries
    • Comes pre-assembled with rubber buttpad and strike plate
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch making transitions from the ready position feel more natural
    • Kit includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Commercial or Mil-Spec configurations
    Learn More
  18. AIB-CC-B : Basic IMod Stock, Commercial Clubfoot

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  19. AIB-CC-G : Basic IMod Stock, Commercial Clubfoot

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  20. AIB-CC-T : Basic IMod Stock, Commercial Clubfoot

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  21. AIB-CS-B : Basic IMod Stock, Commercial Standard

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  22. AIB-CS-G : Basic IMod Stock, Commercial Standard Green

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  23. AIB-CS-T : Basic IMod Stock, Commercial Standard Tan

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  24. AIB-MC-B : Basic IMod Stock, Milspec Clubfoot

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  25. AIB-MC-G : Basic IMod Stock, Milspec Clubfoot Green

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  26. AIB-MC-T : Basic IMod Stock, Milspec Clubfoot Tan

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  27. AIB-MS-B : Basic IMod Stock, Milspec Standard

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  28. AIB-MS-G : Basic IMod Stock, Milspec Standard Green

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  29. AIB-MS-T : Basic IMod Stock, Milspec Standard Tan

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  30. AIBK-MC-B : Basic IMod Combo Kit, Milspec Clubfoot

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  31. AIBK-MC-G : Basic IMod Combo Kit, Milspec Clubfoot**

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  32. AIBK-MC-T : Basic IMod Combo Kit, Milspec Clubfoot**

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  33. AIBK-MS-B : Basic IMod Combo Kit, Milspec Standard** Black

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  34. AIBK-MS-G : Basic IMod Combo Kit, Milspec Standard**

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension, carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  35. AIBK-MS-T : Basic IMod Combo Kit, Milspec Standard**

    Designed from lessons taken from the modern battlefield, the IMOD stock provides a highly practical and functional design. In addition, the stock is constructed from the finest materials, making it capable of withstanding the most rugged demands.

    The IMOD stock kit is the perfect start to any AR-15 build.

    • Waterproof side battery compartments that holds 3 CR123 or two AA batteries in each compartment
    • Comes pre-assembled with rubber buttpad and strike plate
    • Rolled/ angled buttpad with a wide traction area
    • Matte (anti-reflection/anti-glare) finish
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Kit (Mil-Spec only) includes five position Mil-Spec receiver extension , carbine spring and buffer kit, VLTOR Lock Plate and VLTOR Lock Nut
    • Available in Mil-Spec or Commercial configuration
    • Available in Standard or Clubfoot style
    Learn More
  36. ARM-1-B : Rifle Modstock, A1Length, Clubfoot, Milspec Diameter Only

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  37. ARM-1-G : Rifle Modstock, A1Length, Clubfoot, Milspec Diameter Only*

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  38. ARM-1-T : Rifle Modstock, A1Length, Clubfoot, Milspec Diameter Only*

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  39. ARM-2-B : Rifle Modstock A2 Length, Clubfoot, Milspec Diameter Only

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  40. ARM-2-G : Rifle Modstock A2 Length, Clubfoot, Milspec Diameter Only*

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  41. ARM-2-T : Rifle Modstock A2 Length, Clubfoot, Milspec Diameter Only*

    The ARM rifle stock is a dual-purpose stock system which mounts to either a carbine collapsible receiver extension (Mil-Spec only) or a rifle length receiver extension.

    The ARM stock is simple to install and enhances the look of the weapon, giving it a continuous smooth look.

    • Waterproof side battery compartments and cheekweld adapters
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Include standard military attachment for slings, which allows for webbed slings to be used
    • Each stock has two sockets to insert a QDS (1 Quick Disconnect Sling Swivel included)
    • Item is only available in the clubfoot style
    • Comes with storage compartments and cheek weld inserts
    • Available in A1 (ARM-1) and A2 (ARM-2) lengths
    • Weighs 10.10 oz
    Learn More
  42. CASV-14-B : M14/M1A Upper Rail System (Extended length)

    In response to the market demand for an extended and lighter cluster rail, VLTOR released the CASV-14 M14 Rail System. This improved rail system for the M1A/M14 is lighter, slimmer and more versatile for the end user. This rail is only produced in the highly requested "extended length", which extends all the way back to the stripper clip guide.

    Learn More
  43. CASV-14-G : M14/M1A Upper Rail System (Extended length)

    In response to the market demand for an extended and lighter cluster rail, VLTOR released the CASV-14 M14 Rail System. This improved rail system for the M1A/M14 is lighter, slimmer and more versatile for the end user. This rail is only produced in the highly requested "extended length", which extends all the way back to the stripper clip guide.

    Learn More
  44. CASV-14-T : M14/M1A Upper Rail System (Extended length)

    In response to the market demand for an extended and lighter cluster rail, VLTOR released the CASV-14 M14 Rail System. This improved rail system for the M1A/M14 is lighter, slimmer and more versatile for the end user. This rail is only produced in the highly requested "extended length", which extends all the way back to the stripper clip guide.

    Learn More
  45. CASV-FAL : FAL Rifle Series ( Long Model)

    The CASV-FAL handguard is designed for the FAL series of rifles. They mount solidly to the standard inch or metric FAL with a short version for the carbine style FALs. It is mounted at the receiver and barrel to improve accuracy and increase rigidity of the system. Please note that these handguards are not compatible with the G1 barrel configuration or rifles that have bipods attached.

    • Lightweight and easy to install
    • Hard coat anodized 6061 aluminum
    • Multiple mounting points for Picatinny rails
    • Mounting points which accept QDS Sling Swivels
    • Five piece Picatinny Rail Kit included
    • Available in Short (CASV-FAS) or Long (CASV-FAL)
    Learn More
  46. CASV-FAS : FAL Carbine Series ( Short Model)

    The CASV-FAL handguard is designed for the FAL series of rifles. They mount solidly to the standard inch or metric FAL with a short version for the carbine style FALs. It is mounted at the receiver and barrel to improve accuracy and increase rigidity of the system. Please note that these handguards are not compatible with the G1 barrel configuration or rifles that have bipods attached.

    • Lightweight and easy to install
    • Hard coat anodized 6061 aluminum
    • Multiple mounting points for Picatinny rails
    • Mounting points which accept QDS Sling Swivels
    • Five piece Picatinny Rail Kit included
    • Available in Short (CASV-FAS) or Long (CASV-FAL)
    Learn More
  47. CASV-RAILS : 5 Piece Picatinny Rail Kit

    The VLTOR CASV Picatinny rail sections are direct replacement rails used on the CASV series of handguards. These rails are machined from aluminum stock and are of Mil-Spec specifications.

    Learn More
  48. CASV-SCAR-B : SCAR Handguard w/a two-inch rail and mounting hardware

    The VLTOR SCAR KeyModT Handguard replaces the lower and side accessory rails with one smooth continuous surface. The SCAR-KM includes two QD sling swivel sockets where any standard QD sling swivel can be installed. The KeyModT system  allows for mounting KeyModT accessory rails right where you need them. The SCAR-KM comes with one 2" KeyModT Picatinny rail section. Additional rail sections can be purchased separately.  The SCAR-KM is compatible with both the light and heavy models and can be purchased in either black or Patriot Brown.

    An optional extender piece can also be purchased that supplies more length to the handguard if desired.

    • Aircraft-grade aluminum construction
    • Hard coat anodized 6061 T6 aluminum
    • Simple to install
    • Fits both light and heavy models
    • Mounting surfaces at 12, 3, 6, and 9 o'clock positions as well as upper and lower 45 degree angle surfaces
    • Compatible with all standard KeyModT accessories
    • Color(s): Black and Patriot Brown
    Learn More
  49. CASV-SCAR-E-B : SCAR Handguard Extender

    The VLTOR CASV-SCAR Extender allows the end-user to extend the CASV-SCAR handguard an additional three inches. This extra space can be used for mounting tactical accessories or for supporting a longer handgrip.

    • Aircraft-grade aluminum construction
    • Hard coat anodized 6061 T6 aluminum
    • Simple to install
    • Fits both light and heavy models
    • Exact profile of the CASV-SCAR handguard
    • Mounting surfaces at 12, 3, 6, and 9 o'clock positions as well as upper and lower 45 degree angle surfaces
    • Color(s) Black and Patriot Brown
    • Weight: 4.0 oz
    • Length: 3"
    Learn More
  50. CASV-SCAR-E-T : SCAR Handguard Extender

    The VLTOR CASV-SCAR Extender allows the end-user to extend the CASV-SCAR handguard an additional three inches. This extra space can be used for mounting tactical accessories or for supporting a longer handgrip.

    • Aircraft-grade aluminum construction
    • Hard coat anodized 6061 T6 aluminum
    • Simple to install
    • Fits both light and heavy models
    • Exact profile of the CASV-SCAR handguard
    • Mounting surfaces at 12, 3, 6, and 9 o'clock positions as well as upper and lower 45 degree angle surfaces
    • Color(s) Black and Patriot Brown
    • Weight: 4.0 oz
    • Length: 3"
    Learn More
View as List Grid

Items 1-50 of 246

Page
per page
Set Descending Direction
In Stock
© 2019 Gravel Agency Store. All Rights Reserved.