Accessories

View as List Grid

26 Items

per page
Set Descending Direction
In Stock
  1. 22TRC : Tactical Ring Cap

    For use on all A.R.M.S.® #21T, #22T, and #35T Ring saddles. Shown with #22TRRT (Front ring) and #22TRST (Rear ring) attached. 100% MADE IN THE USA.
     
    This unique ring cap was designed to expand the standard use of a cap normally only holding a scope in position, to that of allowing modular enhancements on various conventional optics by simply removing the standard cap and installing the tactical cap using the same socket head screws.

    Learn More
  2. 30855 : RAIL MOUNT ANTI-CANT DEVICE
    Knight‵s Armament Company
    30855 : RAIL MOUNT ANTI-CANT DEVICE
    The KAC Rail Mounted Anti-Cant Device is a simple, low profile tool that helps precision shooters ensure that their rifle is level before breaking a shot. It incorporates a small bubble level into an aluminum base that sits low enough to permit its use under most optics. Attaches to any M1913 Picatinny rail surface via a screw and clamp arrangement. Learn More
  3. 64009 : MKII Throw Lever Conversion Kit (Set of 2)

    The New MK-II Lever® features a built-in precision adjustment wheel allowing finger tip (no tool) selection to desired tension to fit variations in 1913 Mil-Std Dimensions. The mounts adjustment wheel comes pre-gauged and locked to the center of the Mil-Std dovetail specs.

    Learn More
  4. 7855M : Universal Data Card Holder 30mm
    Warne Manufacturing Company
    7855M : Universal Data Card Holder 30mm

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    Learn More
  5. 7856M : Universal Data Card Holder 34mm
    Warne Manufacturing Company
    7856M : Universal Data Card Holder 34mm

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    Learn More
  6. 7857M : Universal Data Card Holder 35mm
    Warne Manufacturing Company
    7857M : Universal Data Card Holder 35mm

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    Learn More
  7. 7899L : DATA CARD LABEL REFILLS - 50pk
    Warne Manufacturing Company
    7899L : DATA CARD LABEL REFILLS - 50pk

    Data Card Label Refill Adhesive labels come in a 50 pack to replace when needed.

    Learn More
  8. 9-M6410 : Magnifier Riser Kit w/Screws
    $26.93
    7mm riser plate with mount screws for EOTECH Gen 2 and Gen 3 magnifiers only. Does not fit Holographic Weapon Sights. This is a direct factory replacement accessory for G23 and G33 magnifier products. Learn More
  9. 9-XE2353-01 : EXPS2 Hood Service Kit BLK
    $78.55
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world.
     
    The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied.
     
    Compatible with EOTech HWS models: 511, 512, 551, and 552.
     
    Kit Includes:
    Hood
    Replacement Torx mounting screws Learn More
  10. 9-XE2354-01 : EXPS3 Hood Service Kit BLK
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world. The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied. Learn More
  11. 9-XE2354-02 : EXPS3 Hood Service Kit TAN
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world.
     
    The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied.
     
    Compatible with EOTech HWS models: 511, 512, 551, and 552.
     
    Kit Includes:
    Hood
    Battery Cap Learn More
  12. GA-0005T-1 : WL-GAT™ Surefire 300 Ultra - CSAT Weapon Light Glass Assault Tool
    The GAT allows operators to rapidly (and effortlessly) breach glass and gain access to high-risk environments while keeping both hands on their primary weapon platform with no effect to the weapon's zero or combat readiness Learn More
  13. SI-REX : Reflex Exoskeleton
    Compact, lightweight, and rugged, the Reflex Exoskeleton provides extreme protection for a wide variety of reflex optics. The patent pending Universal Mounting Pattern enables users to attach various optics of their choice. Included mounting posts securely hold your optic firmly in place. The shield is precision cut and made from steel with a QPQ black finish while the universal mount is hard anodized black. Included with the Exoskeleton, is a lightweight, low profile Picatinny mount that can be used stand alone to save weight. Combined, they offer the highest degree of protection from impacts and shock. At just over 2.5 oz total, the Strike REX is a low-profile, minimalist, must-have accessory for your reflex optics. Learn More
  14. USL1 : Warne Universal Scope Level, 1 inch

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    Learn More
  15. USL30 : Warne Universal Scope Level, 30mm

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    Learn More
  16. USL34 : Warne Universal Scope Level, 34mm

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    Learn More
  17. USL35 : Warne Universal Scope Level, 35mm

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    Learn More
View as List Grid

26 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.