Firearms

Shop By
View as List Grid

10 Items

per page
Set Descending Direction
In Stock
  1. MI-RDDMH : Factory Ruger PC9 M-Lok Handguard

    Features

    • Lightweight design with a slim profile
    • True Free Float Design
    • Mounting bolt and wrench included
    • 12.0" overall length
    • Three built in anti-rotation QD sockets
    • Features 8 sides of M-Lok slots
    • 5-slot polymer M-Lok rail included
    • Weight 10.9 oz installed
    • Construction from 6061 aluminum, Type 3 hard coat anodized for a lifetime of service
    • Fully dehorned for a non-abrasive, comfortable feel
    • MI Lifetime Warranty
    • 100% Made in America - Keeps America Working
    • US Patent Pending
    Learn More
  2. MI-RPCC : MI Chassis Compatible with Ruger® PC Carbine™, 6-Position Mil-Spec Tube

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Mil-Spec Diameter 6-Position Stock Tube – Waterproof Compartment
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 11oz Installed (Without customer supplied stock/grip)
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*

    Learn More
  3. MI-RPCCSF : MI Chassis Compatible with Ruger® PC Carbine™, Railed for Side Folder

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Rail on Receiver for Clamp On Stock
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 6oz Installed
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*
    *Side folding stock/brace not included*

    Learn More
  4. R0364 : Raptor-LT SIG MCX Charging Handle - BLACK LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MCX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Not compatible with SIG SAUER MCX Rattler. Learn More
  5. R0365 : Raptor-LT SIG MCX Charging Handle - FDE LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MCX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Not compatible with SIG SAUER MCX Rattler. Learn More
  6. R0366 : Raptor-LT SIG MCX Charging Handle - GREY LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MCX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Not compatible with SIG SAUER MCX Rattler. Learn More
  7. R0368 : Raptor-LT SIG MPX Charging Handle w/ Support Arm - FDE LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Learn More
  8. SI-STAB-MPX/MCX : Stabilizer for Sig MPX/MCX
    Unlock the full capabilities of your firearm by outfitting it with this Strike Industries MPX/MCX Stabilizer. These Rifle Parts designed by Strike Industries are adjustable to 3 positions to accommodate your preferred shooting style. Easily enhance your accuracy by gaining better control of your weapon with this drop-in Strike Industries MPX/MCX Pistol Stabilizer that requires no gunsmithing or modifications to use. The slim, low-profile design won't interfere with the rest of your build, and its ergonomic construction allows for full mobility in the field. Operate the stabilizer with the ambidextrous push button built for any type of shooter to find your perfect length. There's also a sling loop for additional attachments. Pick up the Strike Industries MPX/MCX Stabilizer Brace to upgrade your firearm. Learn More
View as List Grid

10 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.