Firearms

View as List Grid

26 Items

per page
Set Descending Direction
In Stock
Shop By
  1. 93020 : SureShell® Carrier for Mossberg 930 4 Shell 12Ga Black
    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish. Learn More
  2. 93030 : SureShell® Carrier for Mossberg 930 6 Shell 12Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  3. 93040 : SureShell® Carrier for Mossberg 930 8 Shell 12Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  4. 93960 : Rear Hook Loop for Urbino® Stock for Mossberg 930 12Ga

    The Urbino Tactical stocks include stamped steel sling plates that mimic the factory Benelli rear sling plates.  We
    have produced replacement stampings that feature a circular hook loop instead of the sling loop for use with in-
    creasingly  popular  H&K  style  (dog  leash)  sling  hooks.    These  hook  loops  are  stamped  steel  with  a  tough  mil-spec manganese phosphate finish.

    Learn More
  5. 94430 : Pocket Push Button Sling Mount for Urbino® Stock for Mossberg 930 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  6. 94440 : Pocket Ambi Sling Loop for Urbino® Stock for Mossberg 930 12Ga

    If you need to include sling attachment as part of your 930 accessories, the Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts. The Push Button Sling Swivel mount includes a Push Button Sling Swivel, and all sling mounts feature a tough mil-spec manganese phosphate fi nish. Ambi style sling attachments feature mounts on both sides of the receiver.

    Learn More
  7. 94450 : Pocket Ambi Hook Loop for Urbino® Stock for Mossberg 930 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  8. 94460 : Pocket Ambi Push Button Sling Mount for Urbino® Stock for Mossberg 930 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  9. 94470 : Urbino® Pistol Grip Stock for Mossberg 930™ (Coyote Riser, Standard Butt, 12Ga) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  10. 94480 : Urbino® Pistol Grip Stock for Mossberg 930™ (Coyote Riser, Limbsaver, 12Ga) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  11. 94560 : SureShell Aluminum Carrier and Rail for Moss 930 (4-Shell, 12-GA, 5 in)

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    These SureShell shotshell carriers for the Mossberg 930 feature mounting brackets with integral top Picatinny sight rails. The SureShell shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good.

    The Picatinny rails are machined from aircraft grade 6061-T6 aluminum, which are  mil-spec hard anodized and provide an extremely durable non-glare matte finish.  The basic saddle rail design provides a robust mounting platform suitable for mounting a variety of optical sights, while a second version, which is nearly identical to the basic version, also includes a Mesa Tactical four, six, or eight shell SureShell shotshell carrier mounted on the left side of the receiver. Both versions are manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation.

    The principle difference between one model of SureShell and another, aside from capacity, is the backing plate, which is designed to mount the carrier assembly on a particular model of shotgun. Side-mount SureShell shotshell carriers for Mossberg , Remington and Benelli M1 shotguns use the trigger group pin holes to secure the assemblies to the weapon; the Benelli M2 Tactical, Benelli M4/M1014, Benelli SuperNova Tactical and some Mossberg 500/590/930 versions take advantage of the factory-tapped rail mounting holes in the tops of these shotguns and include integrated Pictanny optics mounting rails; another version with an integrated rail is the saddle-mount design for Remington; SureShell Carriers for M4 SOPMOD stocks feature special hardware for attachment to these buttstocks; Adapter Mount SureShell shotshell carriers are designed to be attached to Mesa Tactical Telescoping Stock Adapter accessory mount points.

    Learn More
  12. 94570 : SureShell Aluminum Carrier and Rail for Moss 930 (6-Shell, 12-GA, 5 in)

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    These SureShell shotshell carriers for the Mossberg 930 feature mounting brackets with integral top Picatinny sight rails. The SureShell shotshell carriers are thus slung on the left side of the receiver, securely fastened at the top. No other shell carrier mounting method is as secure or looks as good.

    The Picatinny rails are machined from aircraft grade 6061-T6 aluminum, which are  mil-spec hard anodized and provide an extremely durable non-glare matte finish.  The basic saddle rail design provides a robust mounting platform suitable for mounting a variety of optical sights, while a second version, which is nearly identical to the basic version, also includes a Mesa Tactical four, six, or eight shell SureShell shotshell carrier mounted on the left side of the receiver. Both versions are manufactured in compliance with MIL-STD-1913 Picatinny specifications, and no gunsmithing is required for installation.

    The principle difference between one model of SureShell and another, aside from capacity, is the backing plate, which is designed to mount the carrier assembly on a particular model of shotgun. Side-mount SureShell shotshell carriers for Mossberg , Remington and Benelli M1 shotguns use the trigger group pin holes to secure the assemblies to the weapon; the Benelli M2 Tactical, Benelli M4/M1014, Benelli SuperNova Tactical and some Mossberg 500/590/930 versions take advantage of the factory-tapped rail mounting holes in the tops of these shotguns and include integrated Pictanny optics mounting rails; another version with an integrated rail is the saddle-mount design for Remington; SureShell Carriers for M4 SOPMOD stocks feature special hardware for attachment to these buttstocks; Adapter Mount SureShell shotshell carriers are designed to be attached to Mesa Tactical Telescoping Stock Adapter accessory mount points.

    Learn More
  13. 94620 : Hook & Loop SureShell Mount for Moss 930 (6-Shell, 12-GA)

    NOTE: these Hook & Loop Mount kits do not include the Hook & Loop SureShell carriers, which are sold separately.

    While Mesa Tactical's development focus has long been on the needs of the professional tactical operator, we have nonetheless enjoyed some acceptance in the tactical competition community, especially Three Gun.  In response to a long expressed desire from Three Gun competitors for a quick-release version of our popular on-gun shell carriers, we've introduced Hook & Loop SureShell carriers.

    Hook & Loop SureShell carriers combine our SureShell Polymer carrier yoke with 3M SJ3572 hook fastener material laminated to a 3/32? Formex 94 substrate.  This allows Hook & Loop SureShell carriers to be easily attached to and removed from surfaces, such as shotgun receivers and MOLLE vests, covered with mating loop material.

    The Hook & Loop SureShell carriers are sold with adhesive backed 3M SJ3571 loop fastener that can be glued directly to a shotgun receiver.  For Three Gun competitors who do not want to permanently affix the loop fastener material to their shotguns, we also offer loop fastener bracket kits that are attached mechanically and can be easily removed at any time.

    Learn More
  14. 94660 : Hook & Loop SureShell Mount with Rail for Moss 930 (6-Shell, 12-GA, 5 in).

    NOTE: these Hook & Loop Mount kits do not include the Hook & Loop SureShell carriers, which are sold separately.

    While Mesa Tactical's development focus has long been on the needs of the professional tactical operator, we have nonetheless enjoyed some acceptance in the tactical competition community, especially Three Gun.  In response to a long expressed desire from Three Gun competitors for a quick-release version of our popular on-gun shell carriers, we've introduced Hook & Loop SureShell carriers.

    Hook & Loop SureShell carriers combine our SureShell Polymer carrier yoke with 3M SJ3572 hook fastener material laminated to a 3/32? Formex 94 substrate.  This allows Hook & Loop SureShell carriers to be easily attached to and removed from surfaces, such as shotgun receivers and MOLLE vests, covered with mating loop material.

    The Hook & Loop SureShell carriers are sold with adhesive backed 3M SJ3571 loop fastener that can be glued directly to a shotgun receiver.  For Three Gun competitors who do not want to permanently affix the loop fastener material to their shotguns, we also offer loop fastener bracket kits that are attached mechanically and can be easily removed at any time.

    Learn More
  15. 94680 : Urbino® Pistol Grip Stock for Mossberg 930™ (Standard Butt, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  16. 94690 : Urbino® Pistol Grip Stock for Mossberg 930™ (Riser, Standard Butt, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  17. 94700 : Urbino® Pistol Grip Stock for Mossberg 930™ (Limbsaver, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock for Mossberg 930 (Riser, Limbsaver, 12-GA, Black) is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  18. 94710 : Urbino® Pistol Grip Stock for Mossberg 930™ (Riser, Limbsaver, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  19. 94760 : SureShell® Polymer Carrier for Mossberg 930™ (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
  20. 94890 : SureShell Polymer Carrier and Rail for Moss 930 (6-Shell, 12-GA, 5 in)

    SureShell Polymer Carriers are injection molded glass filled polymer yokes, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics. These shotshell carrier/rail systems mount by using the drilled and tapped holes on top of the shotgun's receiver.

    This SureShell Polymer Carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The new SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place.

    These SureShell Carrier system features a Picatinny rail machined from aircraft grade 6061-T6 aluminum, which are  mil-spec hard anodized and provide an extremely durable non-glare matte finish.  These SureShell Carrier and rail system offers a perfect solution for adding optical sights and SureShell shotshell carriers to Mossberg 930 shotguns equipped with Mesa Tactical's shorter length-of-pull Urbino pistol grip system.

    Learn More
  21. 94900 : SureShell Polymer Carrier and Rail for Moss 930 (6-Shell, 12-GA, 8¼ in)

    SureShell Polymer Carriers are injection molded glass filled polymer yokes, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics. These shotshell carrier/rail systems mount by using the drilled and tapped holes on top of the shotgun's receiver.

    This SureShell Polymer Carrier system, available in a six shell configuration, features shell holders injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. The new SureShell Polymer Carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place.

    These SureShell Carrier system features a Picatinny rail machined from aircraft grade 6061-T6 aluminum, which are  mil-spec hard anodized and provide an extremely durable non-glare matte finish.  These SureShell Carrier and rail system offers a perfect solution for adding optical sights and SureShell shotshell carriers to Mossberg 930 shotguns equipped with Mesa Tactical's shorter length-of-pull Urbino pistol grip system.

    Learn More
View as List Grid

26 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.