Firearms

View as List Grid

Items 1-50 of 1445

Page
per page
Set Descending Direction
In Stock
Shop By
  1. 01-HG-006-SPADA-ML : SPADA-M 6.75" FREEFLOAT RAIL LIGHTWEIGHT

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  2. 01-HG-010-SPADA-ML : SPADA-M 10.5" FREEFLOAT RAIL LIGHTWEIGHT

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  3. 01-HG-012-SPADA-M : SPADA-M 12.5" FREEFLOAT RAIL

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.

    Durable and Robust design with Ultra narrow diameter.

    Features Ambidextrous QD Sling mounting points.

    Zero Protrusion over Upper Receiver allows the handguard to be mounted to any upper design regardless of shape or size.

    Patented Anti Slip & Anti Rotation system, strengthens the handguard in the receiver end area and allows strong clamping onto the barrel nut. Handguard cannot be removed from the barrel nut without removing all three fixing screws.

    Screws are Grade 8 Steel, Black Oxide Finish.

    • Length 12.5"'
    • OD: 1.55"'
    • ID: 1.15"
    • M-LOK Attachment System

    Made in the USA.

    Learn More
  4. 01-HG-012-SPADA-ML : SPADA-M 12.5" FREEFLOAT RAIL LIGHTWEIGHT

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter, 1.55'' OD.

    Learn More
  5. 01-HG-013-SPADA-ML : SPADA-M 13.5" FREEFLOAT RAIL LIGHTWEIGHT

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  6. 01-HG-015-SPADA-ML : SPADA-M 15" FREEFLOAT RAIL LIGHTWEIGHT

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  7. 01-LP-ECT1C : E-CT1 3.5LB SINGLE STAGE CURVED TRIGGER

    Advanced performance meets precision machining and ultra slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC.
    Available in both Hybrid Curve & Flat Bow designs to suit any shooters preference the E-CT1™ is also offered in a variety of pull weights and configurations, meaning you can run it in a Duty Rifle or in competition at the range.
    The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non existent over travel that will greatly decrease split times and give you a big advantage over the competition.

    The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.

    The CNC machined Aluminum cassette has adjustment set screws built in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
    The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.

    Learn More
  8. 01-LP-ECT1F : E-CT1 3.5LB SINGLE STAGE FLAT TRIGGER

    Advanced performance meets precision machining and ultra slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC.
    Available in both Hybrid Curve & Flat Bow designs to suit any shooters preference the E-CT1™ is also offered in a variety of pull weights and configurations, meaning you can run it in a Duty Rifle or in competition at the range.
    The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non existent over travel that will greatly decrease split times and give you a big advantage over the competition.

    The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.

    The CNC machined Aluminum cassette has adjustment set screws built in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
    The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.

    Learn More
  9. 01-LP-UPS : ULTIMATE TAKEDOWN PIN SET

    UPS-S™  Ultimate Takedown Pin Set.

    Precision machined on Swiss style turning centers our Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards.
    They ship complete with our 3D printed rear pin removal tool (RTT™).
    The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
    The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot
    at 90° to groove.
    Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
    The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
    This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
    QUICKSAFE™
    Our UPS™ Pin system has a built in safety feature that can be utilized by anyone wanting to make it difficult for an Upper Receiver to be fitted to a Lower Receiver.
    To render a lower receiver inoperable the user can quickly remove the front Pivot Pin (Spring & Detent) and insert it through the rear Takedown pin hole from
    the other side of the receiver. Then remove the rear Takedown and allow the Pivot Pin to retain its detent.
    If the pin is rotated so that the detent registers with the groove on its end then it becomes impossible to remove the pin without removing the castle nut and end plate. 
    It is now impossible to mount an upper receiver group to the lower and have a functioning assembly.
    Pins are manufactured from 17-4PH stainless steel in H900 condition and then QPQ Nitride finished.

    Learn More
  10. 01-LP-UPS-TI : ULTIMATE TAKEDOWN PIN SET TITANIUM

    UPS-Ti™
    Ultimate Takedown Pin Set.

    Precision machined on Swiss style turning centers our Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards.
    They ship complete with our 3D printed rear pin removal tool (RTT™).
    The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
    The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot
    at 90° to groove.
    Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
    The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
    This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
    QUICKSAFE™
    Our UPS™ Pin system has a built in safety feature that can be utilized by anyone wanting to make it difficult for an Upper Receiver to be fitted to a Lower Receiver.
    To render a lower receiver inoperable the user can quickly remove the front Pivot Pin (Spring & Detent) and insert it through the rear Takedown pin hole from
    the other side of the receiver. Then remove the rear Takedown and allow the Pivot Pin to retain its detent.
    If the pin is rotated so that the detent registers with the groove on its end then it becomes impossible to remove the pin without removing the castle nut and end plate. 
    It is now impossible to mount an upper receiver group to the lower and have a functioning assembly.
    Pins are manufactured from Grade 5 Titanium and left in a natural finished condition.

    Learn More
  11. 01-RV-SET-N15-RAVEN : LA-N15™ RAVEN™ Billet Upper & Lower Set

    LA-N15T RavenT Billet Receiver Set

    Machined from certified 7075-T6 Aluminum and Type 3 Hardcoat Anodized Class2, Deep Black.

    Our matched billet receiver sets are manufactured to the highest quality standards with excelent fit between parts.

    UART Billet Upper:

    • The patent pending SMOOTHCAMT system features a domed head, low friction cam pin and special upper
      receiver that offer ultra smooth operation.
    • With its blended cam recess the UAR upper is machined from Billet 7075-T6 certified aluminum and milspec,  Type3, Class2, Deep Black, Hardcoat Anodized.
    • The UART is a precision machined upper with a special proprietary bore that is ultra smooth with a roughness average in micro inches of 16, as opposed to standard bored or milled uppers that are 32-63, or higher.
    • This reduces bolt carrier friction and creates a much smoother operation.
    • Barrel nut threads, bore and barrel extension surfaces are all machined in one operation so that they are
      perfectly concentric and perpendicular to the barrel and fixing assembly.
    • The cam pin recess has been carefully designed with a smooth surface that flows into the main reciprocation channel.
    • This allows our specially designed radial, domed head cam pin to move with the minimum of wear against these internal surfaces.

    The CP-R360T Cam Pin has no moving parts to break or lock up.

    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.

    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.

    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.

    Finished in its natural hardened state, copper/brass color.

     

    LA-N15T Billet Lower Receiver

    Internally flared Magazine well, to assist in loading.

    45 Degree BAD Safety Selector cut.

    Spotface recess to rear Takedown Pin making acess easier.

    Single point cut receiver extension threads.

    Enlarged Mag Button area for easier gloved operation.

    Broach Cut Magwell.

     

    Stripped weight for complete set: 1lb.5oz (450g).

    Made in the USA

    Learn More
  12. 01-RV-UP-USR-SF15 : USR FORGED UPPER RECEIVER

    Precision machined from 7075-T6 forgings and Type3 hardcoat Anodized, Class2 deep black.
    Packed with 'above milspec' features that makes it the ideal choice for shooters looking for an enhanced configuration while retaining
    a traditional look.
    The USR (Upper Standard Receiver) receiver features a raised pad behind the front lug to facilitate a tighter receiver fit.
    The barrel extension bore is smaller in diamter than the mil specification so that barrel fit is much tighter, increasing accuracy in the final assembly.
    Bore, threads, Picatinny rail & front receiver face are all machined in one operation meaning that the highest concentricity and perpendicularity are maintained.
    M4 feedramp cuts as standard.
    Manufactured in the USA from certified aluminum alloy.

    Learn More
  13. 01-UP-556-CP : SMOOTHCAM DOMED CAM PIN 223/556

    The CP-R360™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 556 ONLY

    Made in the USA.

    Learn More
  14. 01-UP-556-FPIN : FIRING PIN 223/556

    High Quality Replecment .223/5.56 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    Learn More
  15. 01-UP-556-NIB-BA : BOLT ASSEMBLY 223/556 NIB

    Replacement Carpenter 158 Bolt Assembly

    Hard Ground Critical Diameters

    S110 Shot Peened, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    NiB Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  16. 01-UP-556-NIB-EXKIT : EXTRACTOR KIT 223/556 NIB

    Replacement .223/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA

    Learn More
  17. 01-UP-556-NIT-BA : BOLT ASSEMBLY 223/556 BLK NIT

    Replacement Carpenter 158 Bolt Assembly

    Hard Ground Critical Diameters

    S110 Shot Peened, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    Black QPQ Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  18. 01-UP-556-NIT-EBCG : ENHANCED BCG 223/556 BLK NITRIDE

    LANTAC E-BCG®, Enhanced Bolt Carrier Group.

    M16 Full Auto Style for increased mass and lock time.
    Our BCG is precision machined from 8620 steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.

    The entire carrier assembly is QPQ (Quench Polish Quench) Nitride coated Black, this is a specialized type of Nitrocarbrising Case Hardening that creates a vary hard, smooth surface with increased corrosion resistance and low coefficient of friction.
    The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been resized so that gas is vented differently to a standard carrier.
    This results in a system that runs flatter with a smoother energy pulse with a softer start to carrier movement.

    In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.  The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement.
    All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.

    All E-BCG's® feature the LANTAC CP-R360™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
    The ultra smooth head reduces wear within the upper receiver.
    The BCG's 11.7oz weight helps to increase lock time and smoother operation.
    Gas keys are fitted with gasket sealer & are properly staked at four points and only grade 8 fasteners are used in assembly.

    The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
    However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.  

    Learn More
  19. 01-UP-556-NIT-EXKIT : EXTRACTOR KIT 223/556 BLK NIT

    Replacement .223/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Black QPQ Finished.

    Made in the USA

    Learn More
  20. 01-UP-762-BOLTEJK : BOLT EJECTOR KIT 308/762

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Made in the USA.

    Learn More
  21. 01-UP-762-CPH : SMOOTHCAM DOMED CAM PIN 308/762 HEAVY

    The CP-R360-H™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 308/7.62 ONLY

    Made in the USA.

    Learn More
  22. 01-UP-762-FPIN : FIRING PIN 308/762

    High Quality Replecment .308/7.62 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    Learn More
  23. 01-UP-762-NIB-BA : BOLT ASSMEBLY 308/762 NIB

    Replacement 9310 Steel Bolt Assembly

    Hard Ground Critical Diameters, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    NiB Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  24. 01-UP-762-NIB-EXKIT : EXTRACTOR KIT 308/762 NIB

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA.

    Learn More
  25. 01-UP-762-NIT-BA : BOLT ASSEMBLY 308/762 BLK NIT

    Replacement 9310 Steel Bolt Assembly

    Hard Ground Critical Diameters, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    Black QPQ Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  26. 01-UP-762-NIT-EBCG : ENHANCED BCG 308/762 BLK NITRIDE

    LANTAC E-BCG®, Enhanced Bolt Carrier Group.

    M16 Full Auto Style for increased mass and lock time.
    Our BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.

    The entire carrier assembly is QPQ (Quench Polish Quench) Nitride coated Black,this is a specialized type of Nitrocarbrising Case Hardening that creates a vary hard, smooth surface with increased corrosion resistance and low coefficient of friction.
    The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been resized so that gas is vented differently to a standard carrier.  This results in a system that runs flatter with a smoother energy pulse with a softer start to carrier movement.

    In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.  The flared boss at the tail of the carrier enhances the BCG's® position within the buffer tube at the time of cycling and makes it more consistent, resulting in smoother operation.
    All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.

    All E-BCG's® feature the LANTAC CP-R360-H™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
    The ultra smooth head reduces wear within the upper receiver.
    The BCG's 1Lb 2.1oz weight helps to increase lock time and smoother operation.
    Gas keys are fitted with gasket sealer & are properly staked at four points and only grade 8 fasteners are used in assembly.

    The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
    However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.

    Learn More
  27. 01-UP-762-NIT-EXKIT : EXTRACTOR KIT 308/762 BLK NIT

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Black QPQ Finished.

    Made in the USA.

    Learn More
  28. 01-UP-RPS : RPS END PLATE & CASTLE NUT

    The LANTAC RPS™ Ratchet Plate System removes the necessity to stake castle nuts in place after fitting. It also provides a QD Sling attachment point directly below the buffer tube.

    It utilizes a one piece designed ratcheted tooth and arm, machined directly into the anti rotation plate itself. The enhanced castle nut has an aggressive grip pattern and radially machined grooves that register with the spring like arm and tooth on the plate, causing the nut to be retained in place.

    The nut cannot vibrate loose through firing but can be removed through the use of an armorers wrench if necessary.

    The teeth and grooves are all internally facing so they cannot be accidentally damaged.   The system offers lighter weight with additional functionality over the standard original design.

    Learn More
  29. 01-UP-SC-NIB-EBCG : ENHANCED BCG 223/556 NIB SIDE CHARGER

    LANTAC E-BCG® DI Side Charger, Enhanced Bolt Carrier Group.

    M16 Full Auto Style for increased mass and lock time.
    Our new BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.
    The entire carrier assembly is NiB, Electroless Nickel Boron coated with the patented, advanced UCT EXO process, unlike standard NiB coatings.
    This offers extreme lubricity with a friction coefficient of .02 and surface hardness of 82-85 Rockwell C.
    The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been re sized so that gas is vented differently to a standard carrier.
    This results in a system that runs flatter with a smoother energy pulse.
    In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.
    The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement.
    All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.
    All E-BCG's® feature the LANTAC CP-R360™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
    The ultra smooth head reduces wear within the upper receiver.
    The BCG's 11.7oz weight (Excluding Handle) helps to increase lock time and smoother operation.
    Gas keys are properly staked at four points and only grade 8 fasteners are used in assembly.

    The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
    However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.  

    Learn More
  30. 01-UP-UFA-S : ULTIMATE FORWARD ASSIST

    LANTAC UFA-S, Ultimate Forward Assist (Solid)
    SKU: 01-UP-UFA-S

    Lantac UFA-S
    Ultimate Forward Assist (Solid).
    The UFA-S is precision swiss lathe turned & manufactured from certified 4140 Cr-Mo steel, giving improvements to strength, corrosion resistance and durability over the original materials.
    Parts are all heat treated to 48-52 Rc (Rockwell C).
    In addition all parts are QPQ (Quench Polish Quench) Nitrided for improved corrosion resistance and enhanced lifespan.
    The main Plunger spring is manufactured with the improvement of Stainless 316 music wire (as per ASTM A313) for enhanced corrosion resistance.
    Closed end coils are also used rather than the original open ends for improved seating and alignment. Springs are stress relieved and air cooled.
    The Plunger Detent Spring is improved and manufactured from Zinc plated music wire (as per ASTM A288) for enhanced corrosion resistance.
    Springs are all stress relieved as per the mil specification. 
    The assembly is retained within the upper receiver with an improved spiral design pin as opposed to a slotted version for increased strength and durability. Pins are fully certified by the manufacturer.
    The design of the Cap has been improved by reducing its diameter and snagging potential, creating a more streamline surface flow when assembled into the upper receiver.
    Exterior surface knurling around the caps edge allows for positive engagement with a gloved or naked hand while removing the circular ridge that exists on the current design.
    Weight of the assembly has also been improved to 20.227g (.7135oz) from 22.481g (.7930oz).
    All outer details are bead blasted to create a satin, reduced reflectivity surface prior to finishing.
    Manufactured in the USA from USA sourced materials and finishes.
     

    MIL/LE discount available, please visit our FAQ page on how to obtain the discount code.
    If you would like to add shipping insurance to your order, please purchase here.

    Learn More
  31. 04-246 : Super 42, Tungsten Buffer Weight

    1 Tungsten weight to add over all weight to your buffer setup. (H1 / H2 / H3 setups).

    To change the Geissele Automatics H1 Buffer assembly to the heavier H2 or H3 buffer setup, you will need to disassemble and re-assemble the buffer replacing the steel weights with the correct number of tungsten weights.

    Learn More
  32. 05-101 : Super Semi-Automatic (SSA®)

    The Geissele Super Semi-Automatic (SSA®) trigger is a semi-automatic only version of Geissele Automatics's Super Select-Fire trigger. The SSA is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The SSA's two-stage design allows the trigger to be light enough for accurate and precise shots, but forgiving enough for CQB. The SSA is safety certified by Crane Naval Surface Warfare Center. It is recommended for demanding applications such as Law Enforcement use, Close Quarters Battle (CQB) and mid-range carbine work.

    Learn More
  33. 05-102 : Super Select-Fire (SSF®) for M4 Carbine

    The Geissele Super Select-Fire (SSF®) Trigger is a select-fire combat trigger that Geissele Automatics developed for the U.S. Special Operations Community. The SSF is a non-adjustable combat style two-stage trigger that is available in 4.5lb. and 5.5lb. configurations. In semi-automatic mode, the SSF is a precision two-stage trigger that allows precise and accurate trigger control. In fully-automatic mode, the SSF is a single-stage trigger with a smooth, continuous trigger pull and abrupt hammer release. The SSF is safety certified by Crane Naval Surface Warfare Center. NSN# 1005-01-618-8104

    All NFA rules apply to the sale of the SSF trigger.

    Learn More
  34. 05-123 : LARGE PIN Super Semi-Automatic (SSA®)

    Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-E's reduced first and second stage pull weights result in a trigger with a smooth, light first stage take-up and a crisp, candy cane-like second stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

    Learn More
  35. 05-145 : Geissele 2 Stage (G2S)
    Geissele® Automatics
    05-145 : Geissele 2 Stage (G2S)

    The Geissele 2 Stage (G2S) was designed to be a high quality, cost effective option of the SSA. The G2S is a 4.5lb. non-adjustable combat trigger that is a precision two-stage trigger and allows precise and accurate trigger control. The G2S is manufactured from the same tool steel as the SSA. Visually, from the outside of the weapon there is no difference from the SSA and the feel and reliability is the same. The G2S however has a different way of holding the hammer pin in place, there is no laser markings, and the parts are only spot checked for MP.

    Learn More
  36. 05-150 :  Hi-Speed National Match Trigger Set - Large Pin

    This is the large pin version of the Geissele Hi-Speed National Match Trigger Series and is designed for NRA High Power Rifle competition with highly modified match-grade Colt AR-15-type rifles. The Service Rifle, Designated Marksman Rifle, and Match Rifle Spring sets are all included in this purchase.

    Geissele Automatics currently offers three large pin Hi-Speed trigger products.  These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference.

     

    Learn More
  37. 05-152 : Super 3 Gun (S3G)
    Geissele® Automatics
    05-152 : Super 3 Gun (S3G)

    The S3G was developed to combine the SSF combat trigger's match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting.

    Learn More
  38. 05-160 : Super Semi-Automatic Enhanced (SSA-E)

    Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-E's reduced first and second stage pull weights result in a trigger with a smooth, light first stage take-up and a crisp, candy cane-like second stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

    Learn More
  39. 05-165 : Super Dynamic -Combat (SD-C)

    The Geissele Super Dynamic-Combat (SD-C) Trigger featuring an exclusive flat trigger bow, is a rugged, nonadjustable combat trigger with a sear design that provides a wide margin of safety against unintentional discharges yet still gives the operator a sharp, repeatable trigger release.

    Learn More
  40. 05-166 : SUPER DYNAMIC 3-GUN SD-3G

    The S3G was developed to combine the SSF combat trigger's match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting.

    Learn More
  41. 05-167 : Super Dynamic-Enhanced (SD-E)

    The Geissele Super Dynamic-Enhanced (SD-E) Trigger featuring an exclusive flat trigger bow, is a finely-tuned two stage trigger providing enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger.

    Learn More
  42. 05-171 : LARGE PIN Super Semi-Automatic Enhanced (SSA-E)

    Finely-tuned semi-automatic-only version of our full-auto, two stage combat trigger presently used in the U.S. Special Operations Community. The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. Built on the chassis of the Geissele SSA, the Super Semi-Automatic Enhanced (SSA-E) provides enhanced trigger control and weapon accuracy while maintaining the robustness and reliability of our combat-proven two-stage trigger. The SSA-E's reduced first and second stage pull weights result in a trigger with a smooth, light first stage take-up and a crisp, candy cane-like second stage break. The SSA-E is ideal for use in precision Squad Designated Marksman type rifles where weapon accuracy and reliability are critical and a non-adjustable drop in trigger is desired.

    Learn More
  43. 05-174 : LARGE PIN Super 3 Gun (S3G)

    This is a semi-automatic-only derivative of the two-stage Super Select-Fire (SSF) combat trigger that Geissele Automatics produces for customers in the U.S. Special Operations Community.The large pin dimension is 0.169 inches, whereas the standard pin dimension is 0.155 inches. The S3G was developed to combine the SSF combat trigger's match-grade semi-automatic performance with its smooth single-stage full-automatic feel to make a fast, smooth, and robust trigger ideal for 3 Gun competition shooting.

    Learn More
  44. 05-181 : Hi-Speed National Match Trigger Set

    Hi-Speed National Match Triggers
    Geissele Automatics currently offers three large pin Hi-Speed trigger products.  These adjustable triggers are specially designed for competition, hunting, tactical, and military use, where both accuracy and robustness are critical. As an adjustable trigger, the first and second stage weight distribution, as well as, total pull weight, over-travel, and sear engagement are all to be tuned to the shooters preference.

    Learn More
  45. 05-190B :  10.5" Super Modular Rail HK-Black

    The Super Modular (SMR) HK was designed to replace the standard rail on an HK MR556 or HK 416 weapon platform. This rail system utilizes the stock HK barrel nut however incorporates strength, rigidity, and modularity. Constructed of billet 7075-T6 aluminum and type 3 hardcoat anodized to meet military specifications.

    The SMR HK includes 3 M1913 picatinny accessory rail sections that mount anywhere along the length of the rail at the 3, 6, and 9 o"clock positions. These sections mount directly into steel inserts, creating a rock solid steel on steel connection.

    Trusted by our Nation"s elite, with their input we developed the feature and performance rich HK SMR.

    Learn More
  46. 05-190S :  10.5" Super Modular Rail HK-DDC

    The Geissele Super Modular HK rail was designed to replace the standard rail on the HK 416 weapon platform. Constructed of precision machined, 6061-T6 aluminum allows the SMR 416 to incorporate strength, rigidity and modularity while utilizing the stock HK barrel nut. Finished in Type 3 Hardcoat Anodize to meet military specifications and featuring rail sections at the 3, 6 and 9 o’clock positions to mount accessory rails, using steel inserts for a rock solid, steel to steel connection; the SMR 416 is trusted by our Nation’s elite warfighters, whose direct input and feedback allowed us to develop the feature and performance rich SMR 416.

    Learn More
  47. 05-191B :  14.5" Super Modular Rail HK-Black

    The Super Modular (SMR) HK was designed to replace the standard rail on an HK MR556 or HK 416 weapon platform. This rail system utilizes the stock HK barrel nut however incorporates strength, rigidity, and modularity. Constructed of billet 7075-T6 aluminum and type 3 hardcoat anodized to meet military specifications.

    The SMR HK includes 3 M1913 picatinny accessory rail sections that mount anywhere along the length of the rail at the 3, 6, and 9 o"clock positions. These sections mount directly into steel inserts, creating a rock solid steel on steel connection.

    Trusted by our Nation"s elite, with their input we developed the feature and performance rich HK SMR.

    Learn More
View as List Grid

Items 1-50 of 1445

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.