Firearms

View as List Grid

Items 1-50 of 140

Page
per page
Set Descending Direction
In Stock
Shop By
  1. 05-476B : Super Charging Handle (SCH), 7.62

    The Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. The levers are dual contoured similar to that of the charging handle of an M14, where not only the x-axis but also the y-axis receive radius cuts. The handling surface of the lever is also checkered, adding a textured grip aiding to the use when operating with gloves. The heightened rear lip of the SCH aids in mitigating gas blow back to the shooter when shooting with short barreled and suppressed weapon systems.

    All parts are then Type 3 Hardcoat anodized and are available in Black and DDC (Desert Dirt Color).

    Learn More
  2. 18610 : Shotgun 1100™/11-87™ 12Ga Stock & Fore-end Black Synthetic with SuperCell™ recoil pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  3. 19258 : Gas System Kit - 1100™/1187™ Piston - Piston Seal & 3 Barrel Seals N/A
    • Genuine factory replacement parts
    • Stainless steel piston/piston seal
    • Teflon-coated barrel seals
    • Fits all Model 1100T and 11-87T 12Ga Shotguns
    Learn More
  4. 19264 : Barrel Seal / O-Ring - 3 Pack N/A rubber

    The only fitting choice for your Remington shotgun.Whether you want your Remington shotgun to perform like two, or you’re restoring “an old friend,” never compromise on our superb craftsmanship and dependability.

    Learn More
  5. This Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington Shotgun to accept a sling. Fits all Pre-2010 Remington Model 870, 1100, and 11-87 12 & 16 gauge shotguns. Rear swivel stud screws right into the butt of the shotgun"s stock.

    Learn More
  6. 19471 : SuperCell™ Recoil Pad Shotguns with Wood Stocks Black Cellular Polyurethane
    $26.77

    The world's most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870T generate up to 54% less recoil than our leading competitors' autoloading shotguns with factory pads. Its millions of tiny SuperCellT absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCellT recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870T produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCellT technology is the product of 10 years' rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCellT, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a "kick" to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that's extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we've pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCellT, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCellT era.

    Learn More
  7. 19472 : SuperCell™ Recoil Pad Shotguns with Synthetic Stocks Black Cellular Polyurethane

    The world’s most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870™ generate up to 54% less recoil than our leading competitors’ autoloading shotguns with factory pads. Its millions of tiny SuperCell™ absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCell™ recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870™ produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCell™ technology is the product of 10 years’ rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCell™, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a “kick” to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that’s extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we’ve pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCell™, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCell™ era.

    Learn More
  8. 19481 : Adjustable Length Of Pull Spacer Kit Black
    $16.04

    Now standard on all Compact shotguns, our new Adjustable Length of Pull System makes it simple to tailor the fit of your firearm - all the way up to standard size. This system allows the LOP to grow with youngsters and be modified to the precise specification of all shooters of smaller stature. A total 1" of adjustment brings Compact buttstocks (1" shorter LOP than standard) up to standard size in 1/4" and 1/2" increments.

    It's also available as an accessory for use on other Remington firearms.

    Learn More
  9. 19485 : Shotgun 1100™/11-87™ 12Ga Monte Carlo Stock & Fore-end Black Synthetic with SuperCell R Pad
    $106.88

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  10. 19548 : Shotgun 1100™/11-87™ ShurShot® 12Ga Stock & Fore-end Black Synthetic with SuperCell™ R Pad

    The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

    Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

    The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

    Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

    Learn More
  11. 308M10T 11.5 : 11.5" 308 WIN STAINLESS MATCH BARREL LIGHT CONTOUR

    .308 win/7.62x51 caliber
    Stainless steel 416r
    Rockwell c 30-32
    10 poly twist
    Lightweight contour
    V seven match chamber
    V seven ultra match lapped
    Utilizes a melonite coated barrel extension with extended feed ramps for smooth feeding.
    5/8 x 24 threads
    Weighs  27 oz with gas block
    Ships with 17-4 stainless pin-on low pro gas block & stainless carbine gas tube
    Barrel fluting option available with 7 flutes

    Learn More
  12. 308M10T 16 : 16" 308 WIN STAINLESS MATCH BARREL  LIGHT CONTOUR

    .308 win/7.62x51 caliber
    Stainless steel 416r
    Rockwell c 30-32
    10 poly twist
    Lightweight contour
    V Seven match chamber
    V Seven ultra match lapped
    Utilizes a melonite coated barrel extension with extended feed ramps for smooth feeding.
    5/8 x 24 threads
    Weighs  32.8 oz with gas block
    Ships with titanium pin-on low pro gas block in ionbond black (dlc) finish & stainless mid-length gas tube

    Learn More
  13. 308M10T 18 : 18" 308 WIN STAINLESS MATCH BARREL

    .308 win/7.62x51 caliber
    Stainless steel 416r
    Rockwell c 30-32
    10 poly twist
    V seven match chamber
    V seven ultra match lapped
    Utilizes a melonite coated barrel extension with extended feed ramps for smooth feeding.
    5/8 x 24 threads
    Weighs  39.9 oz with gas block
    Ships with 17-4 stainless pin-on low pro gas block & stainless rifle length gas tube
    Barrel fluting option available with 7 flutes

    Learn More
  14. 4000-LF-BK : The Original Ergo Grip® AR Large Frame SUREGRIP™ Right Hand - Black
    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the Ergo Grip Spacer for large frame AR for increased comfort. Learn More
  15. 4009-BK : The Original Ergo Grip® AR15/AR10 SUREGRIP™ AT Agressive Texture - Black

    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  16. 4009-DE : The Original Ergo Grip® AR15/AR10 SUREGRIP™ AT Agressive Texture - Dark Earth

    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  17. 4009-OD : The Original Ergo Grip® AR15/AR10 SUREGRIP™ AT Agressive Texture - OD Green

    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  18. 4010-BK : ERGO 2 AR Grip AR15/M16/AR10 SUREGRIP™ Ambi - Black

    Very similar in size to the 4009 and 4011. The 4010 is slightly more rounded in the back. The shooter may or may not notice this size difference.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  19. 4010-CAMO-ARCTIC : ERGO 2 AR15/M16/AR10 Grip Kit SUREGRIP-Ambi-Camo-Arctic

    Built to blend into the frozen wastelands of the north and help shooters mimic the snowy landscape. The Arctic pattern features white and black over-molded SUREGRIP texture.

    Design allows installation on both .223 and .308 AR-15/AR-10 type receivers.
    A2 sized inner cavity compatible with many accessories available on the market.
    Ergonomically correct finger grooves
    Integrated rear upper extension supports the web of your hand.
    Over molded SUREGRIPT material provides non-slip grip
    Virtually impervious to oils and solvents
    Comes with The GapperT

    Learn More
  20. 4010-CAMO-COBALT : ERGO 2 AR15/M16/AR10 Grip Kit SUREGRIP-Ambi-Camo-Cobalt

    Cobalt blue took thousands of years to discover and we pay homage to the process with our new textures. The Cobalt pattern features blue and black over-molded SUREGRIP texture.

    Design allows installation on both .223 and .308 AR-15/AR-10 type receivers.
    A2 sized inner cavity compatible with many accessories available on the market.
    Ergonomically correct finger grooves
    Integrated rear upper extension supports the web of your hand.
    Over molded SUREGRIPT material provides non-slip grip
    Virtually impervious to oils and solvents
    Comes with The GapperT

    Learn More
  21. 4010-CAMO-INFERNO : ERGO 2 AR15/M16/AR10 Grip Kit SUREGRIP-Ambi-Camo-Inferno

    A pattern designed by blood in the fires of a long dead volcano and ready for attachment to your rifle. The Inferno pattern features red and black over-molded SUREGRIP texture.

    Design allows installation on both .223 and .308 AR-15/AR-10 type receivers.
    A2 sized inner cavity compatible with many accessories available on the market.
    Ergonomically correct finger grooves
    Integrated rear upper extension supports the web of your hand.
    Over molded SUREGRIPT material provides non-slip grip
    Virtually impervious to oils and solvents
    Comes with The GapperT

    Learn More
  22. 4010-CAMO-PREDATOR : ERGO 2 AR15/M16/AR10 Grip Kit SUREGRIP-Ambi-Camo-Predator

    Built to blend into wooded areas by mimicking the natural formation of sticks and grass in open areas. The Predator pattern features dark earth and black over-molded SUREGRIP texture.

    Design allows installation on both .223 and .308 AR-15/AR-10 type receivers.
    A2 sized inner cavity compatible with many accessories available on the market.
    Ergonomically correct finger grooves
    Integrated rear upper extension supports the web of your hand.
    Over molded SUREGRIPT material provides non-slip grip
    Virtually impervious to oils and solvents
    Comes with The GapperT

    Learn More
  23. 4010-DE : ERGO 2 AR Grip AR15/M16/AR10 SUREGRIP™ Ambi - Dark Earth

    Very similar in size to the 4009 and 4011. The 4010 is slightly more rounded in the back. The shooter may or may not notice this size difference.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  24. 4010-GG : ERGO 2 AR Grip AR15/M16/AR10 SUREGRIP™ Ambi - Graphite Grey

    Very similar in size to the 4009 and 4011. The 4010 is slightly more rounded in the back. The shooter may or may not notice this size difference.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  25. 4010-OD : ERGO 2 AR Grip AR15/M16/AR10 SUREGRIP™ Ambi - OD Green

    Very similar in size to the 4009 and 4011. The 4010 is slightly more rounded in the back. The shooter may or may not notice this size difference.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  26. 4011-BK : The Original Ergo Grip® AR15/AR10 SUREGRIP™ - Black

    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  27. 4011-DE : The Original Ergo Grip® AR15/AR10 SUREGRIP™ - Dark Earth

    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  28. 4011-OD : The Original Ergo Grip® AR15/AR10 SUREGRIP™ - OD Green


    The original Ergo Grip®, developed by Steve Hines, was the first truly ergonomic, shooter focused grip for AR platform rifles. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip® is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip® comes with the patented GapperT for increased comfort.

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  29. 4014-CAMO : ERGO 2 Flat Top AR15/AR10 Grip Kit SUREGRIP-Ambi-Camo

    A truly ergonomic, shooter focused flat top grip for AR platform rifles and chassis systems. Designed for performance by creating a better interface between the shooter and firearm, the Ergo Grip is still the standard by which positive grip and shooter comfort are measured. The Ergo Grip comes with the patented GapperT for increased comfort. Very similar in size to the 4009 and 4011.

    Learn More
  30. 4020-BK : ERGO TDX-0 Flat Top Tactical Deluxe Zero Angle Precision - SureGrip® - Black

    TDX-0TM (Tactical Deluxe Zero Angle Grip).
    ERGO’s classic Tactical Deluxe Flat Top is now available in a zero angle grip. Designed for improved comfort and control on precision rifle chassis systems, AR-15/AR-10 platforms, and air guns. The new grip puts your hand in a better angle for modern shooting positions.

    Learn More
  31. 4020-DE : ERGO TDX-0 Flat Top Tactical Deluxe Zero Angle Precision - SureGrip® - Dark Earth

    TDX-0TM (Tactical Deluxe Zero Angle Grip).
    ERGO’s classic Tactical Deluxe Flat Top is now available in a zero angle grip. Designed for improved comfort and control on precision rifle chassis systems, AR-15/AR-10 platforms, and air guns. The new grip puts your hand in a better angle for modern shooting positions.

    Learn More
  32. 4085 : The Ergo Gapper™ AR15/M16 - Black

    Fills the gap between the trigger guard and the pistol grip on the AR/M4 and cushions your knuckle,prevents abrasion to you finger and provides a more finished look to your rifle. The GAPPERT is made from solvent resistant Santoprene®, clips in easily, and secures with a tight friction fit.

    Learn More
  33. 4085-6PK : The Ergo Gapper™ AR15/M16 6 pack - Black

    Fills the gap between the trigger guard and the pistol grip on the AR/M4 and cushions your knuckle,prevents abrasion to you finger and provides a more finished look to your rifle. The GAPPERT is made from solvent resistant Santoprene®, clips in easily, and secures with a tight friction fit.

    Learn More
  34. 4924-BK : ERGO F93 Pro Stock™ Adjustable AR-10 (Large Frame) - Black

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

    Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  35. 4924-DE : ERGO F93 Pro Stock™ Adjustable AR10 (Large Frame) - Dark Earth

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

    Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  36. 4924-GG : ERGO F93 Pro-Stock™ Adjustable AR10 (Large Frame) - Graphite Grey

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

    • Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
    • Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
    • Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
    • Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
    • Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
    • 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
    • Weight is only 1.3 pounds

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  37. 4924-OD : ERGO F93 Pro Stock™ Adjustable AR10 (Large Frame) - OD Green

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

    Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  38. 4924-PB : ERGO F93 Pro-Stock™ Adjustable AR10 (Large Frame) - Black Tube w/ Pink

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

    • Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
    • Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
    • Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
    • Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
    • Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
    • 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
    • Weight is only 1.3 pounds

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  39. 4924-PUR : ERGO F93 Pro-Stock™ Adjustable AR10 (Large Frame) - Black Tube w/ Purple

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

    • Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
    • Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
    • Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
    • Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
    • Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
    • 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
    • Weight is only 1.3 pounds

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  40. 4924-REB : ERGO F93 Pro Stock™ Adjustable AR-10 (Large Frame) - Black Tube w/ Robbins Egg blue

    Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

    • Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
    • Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
    • Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
    • Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
    • Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
    • 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
    • Weight is only 1.3 pounds

    F93 Strike Plate available

    *Dual use compatible with shotgun adapter #4453 and #4454

    Learn More
  41. 81621 : AR15/AR10 Gas Tube - Nitride Coated Pistol Length

    Nitride Coated Gas Tube. This gas tube includes the gas tube roll pin.

    Pistol length
    Stainless steel
    Black nitride finish

    Learn More
View as List Grid

Items 1-50 of 140

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.