Firearms

View as List Grid

42 Items

per page
Set Descending Direction
In Stock
Shop By
  1. 05-636B : Super Charging Handle MPX - Black

    The MPX Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. This product was designed specifically for use in Sig Sauer’s MPX platform.

    Learn More
  2. 05-636S : Super Charging Handle MPX - Sand

    The MPX Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. This product was designed specifically for use in Sig Sauer’s MPX platform.

    Learn More
  3. 18610 : Shotgun 1100™/11-87™ 12Ga Stock & Fore-end Black Synthetic with SuperCell™ recoil pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  4. 19258 : Gas System Kit - 1100™/1187™ Piston - Piston Seal & 3 Barrel Seals N/A
    • Genuine factory replacement parts
    • Stainless steel piston/piston seal
    • Teflon-coated barrel seals
    • Fits all Model 1100T and 11-87T 12Ga Shotguns
    Learn More
  5. 19264 : Barrel Seal / O-Ring - 3 Pack N/A rubber

    The only fitting choice for your Remington shotgun.Whether you want your Remington shotgun to perform like two, or you’re restoring “an old friend,” never compromise on our superb craftsmanship and dependability.

    Learn More
  6. This Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington Shotgun to accept a sling. Fits all Pre-2010 Remington Model 870, 1100, and 11-87 12 & 16 gauge shotguns. Rear swivel stud screws right into the butt of the shotgun"s stock.

    Learn More
  7. 19471 : SuperCell™ Recoil Pad Shotguns with Wood Stocks Black Cellular Polyurethane
    $26.77

    The world's most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870T generate up to 54% less recoil than our leading competitors' autoloading shotguns with factory pads. Its millions of tiny SuperCellT absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCellT recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870T produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCellT technology is the product of 10 years' rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCellT, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a "kick" to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that's extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we've pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCellT, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCellT era.

    Learn More
  8. 19472 : SuperCell™ Recoil Pad Shotguns with Synthetic Stocks Black Cellular Polyurethane

    The world’s most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870™ generate up to 54% less recoil than our leading competitors’ autoloading shotguns with factory pads. Its millions of tiny SuperCell™ absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCell™ recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870™ produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCell™ technology is the product of 10 years’ rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCell™, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a “kick” to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that’s extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we’ve pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCell™, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCell™ era.

    Learn More
  9. 19481 : Adjustable Length Of Pull Spacer Kit Black
    $16.04

    Now standard on all Compact shotguns, our new Adjustable Length of Pull System makes it simple to tailor the fit of your firearm - all the way up to standard size. This system allows the LOP to grow with youngsters and be modified to the precise specification of all shooters of smaller stature. A total 1" of adjustment brings Compact buttstocks (1" shorter LOP than standard) up to standard size in 1/4" and 1/2" increments.

    It's also available as an accessory for use on other Remington firearms.

    Learn More
  10. 19485 : Shotgun 1100™/11-87™ 12Ga Monte Carlo Stock & Fore-end Black Synthetic with SuperCell R Pad
    $106.88

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  11. 19548 : Shotgun 1100™/11-87™ ShurShot® 12Ga Stock & Fore-end Black Synthetic with SuperCell™ R Pad

    The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

    Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

    The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

    Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

    Learn More
  12. 681 : AR PCC SINGLE STAGE CURVED SHOE 3 LB

    A drop in, complete assembly trigger

    Pull weight 2.5 - 3 pounds for both curved and straight shoe models

    The trigger makes use of your rifle's original hammer/trigger pins as well as safety

    Offered in straight or curved trigger shoe

    This Timney set the standard for aftermarket trigger upgrades for the AR/M4 rifle

    Learn More
  13. 681-ST : AR PCC SINGLE STAGE, STRAIGHT SHOE 3 LB

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering four models for the MPX - single-stage, two-stage and curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of three-pounds for the single stage and a two-pound first stage and two-pound second stage for the two-stage model.

    Both triggers are a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  14. 682 : AR PCC 2 STAGE CURVED SHOE 2 LB FIRST  STAGE 2 LB SECOND STAGE

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering two models for the MPX curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of four pounds with a  two-pound first stage and two-pound second stage for the two-stage model.

    The trigger is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  15. 682-ST : AR PCC 2 STAGE, STRAIGHT SHOE 2 LB FIRST  STAGE 2 LB SECOND STAGE

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering two models for the MPX curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of four pounds with a  two-pound first stage and two-pound second stage for the two-stage model.

    The trigger is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  16. 683S : SIG MPX SINGLE STAGE CURVED TRIGGER 4.5LB**

    Timney is the market leader for Sig replacement rifle triggers. A drop in, complete assembly trigger. The trigger is factory tuned for 4.5 lb. pull weight, with no creep. The trigger makes use of your rifle's original hammer/trigger pins as well as safety.

    • Single stage trigger
    • Trigger allows you to become more accurate with your rifle
    • No gunsmith needed, easy to install
    • Ready for the range, no adjustments needed
    • No additional parts needed to install trigger
    • Crisp feel
    Learn More
  17. 90070 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch LoP, soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  18. 90080 : Urbino® Pistol Grip Stock Remington® 870™, 1100™, 11-87™ Riser, Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  19. 90210 : SureShell® Carrier for Remington 6 Shell 12Ga Left Side

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  20. 90320 : SureShell® Carrier for Remington 4-Shell 12Ga Left Side

    SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.

    Learn More
  21. 90420 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 8 Shell 12Ga Left side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  22. 90580 : SureShell® Aluminum Carrier for Remington® 870™/1100™/11-87™ (2-Shot 12Ga Left Side)

    Mesa Tactical Lightweight aluminum shotshell holder attaches to the left side of the shotgun receiver.

    Learn More
  23. 90860 : Trigger Pin Replacement Kit for Remington® 870/1100/1187

    The trigger pin replacement kits, also known as "anti-walk" pins, can be installed in Remington 870/1100/1187 shotguns to secure the trigger pins in place. These kits are incompatible with receiver mounted SureShell carriers or side Picatinny rails.

    Learn More
  24. 91260 : LEO® Telescoping Stock Kit for Remington 870™ 12Ga

    Adapts AR-15 style butt stocks and pistol grips for use with Remington 870 and Mossberg 500/590 shotguns to gives the shotguns similar handling characteristics to the AR-15.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  25. 91520 : Pocket Push Button Sling Mount for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  26. 91530 : Pocket Ambi Push Button Sling Mount for Urbino® Stock for Remington® 870™,1100™, 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  27. 91540 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Limbsaver 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  28. 91550 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Riser. Limbsaver. 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock for is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  29. 91570 : Pocket Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  30. 91600 : Pocket Ambi Sling Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  31. 91610 : Pocket Ambi Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  32. 91800 : Rear Hook Loop for Urbino® Stock for Remington® Semi-auto 1100™, 11-87™ 12Ga

    The Urbino Tactical stock features a Benelli-style rear sling plate for installation of two-point slings. The installation of this component is entirely optional. Unlike the Benelli version, the Mesa Tactical Urbino Tactical stock sling plate accepts US military standard 1¼ inch sling webbing.

    Learn More
  33. 93240 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 4 Shell 20Ga Left Side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  34. 93250 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 6 Shell 20Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  35. 93260 : SureShell® Carrier for Remington® 870™, 1100™, 11-87™ 8-Shell 20Ga - Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  36. 93330 : Receiver-back Ambi Hook Loop for Remington® Shotgun

    Our innovative Sling and Hook Loops provide a way to securely attach a tactical sling directly to the shotgun receiver. They are excellent solutions for single-point slings, or for the receiver end attachment of three-point slings. The can be employed as alternatives to Burnsed loops or other attachment methods that are incompatible with custom stocks. In addition to sling mounts replacing the rear trigger pin, we also offer a limited line of hook loops that mount behind the Remington 870 receiver, between the receiver and the factory stock. These were produced at the request of a large US Federal enforcement agency. Unlike similar designs, the Mesa Tactical hook loops are machined from 1018 carbon steel, then given a mil-spec manganese phosphate finish. Some fitting with a file may be required.

    Learn More
  37. 94740 : SureShell® Polymer Carrier for Remington® (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
  38. R0171 : Raptor Ambidextrous Charging Handle for SIG MPX

    You asked, we listened: introducing RaptorT Ambidextrous Charging Handles for SIG MPXT & SIG MCXT. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. These variants are compatible with all generations of semi-auto and full-auto SIG MPX/MCX firearms. The Support Arm is recommended but not required for Raptor installation, and is not compatible with factory SIG MPX/MCX charging handles.

    Designed & manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries

    Learn More
  39. R0367 : Raptor-LT SIG MPX Charging Handle w/ Support Arm - BLACK LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Learn More
  40. R0369 : Raptor-LT SIG MPX Charging Handle w/ Support Arm - GREY LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Learn More
View as List Grid

42 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.