Firearms

View as List Grid

Items 1-50 of 92

Page
per page
Set Descending Direction
In Stock
Shop By
  1. 07000293 : Barrel, 7.62x51, N6, 12.5 Leonidas, Stainless, .750 Gas Block, Lo-Pro, GTL

    Stainless Barrel -7.62 x 51,  NATO match chamber

    • Fits DPMS/AR-10/SR-25
    • 1 in 10" twist
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Low Profile Gas Block, .750
    • 5/8 x 24 threads
    • Medium Contour
    Learn More
  2. 07000294 : Barrel, 7.62x51, N6, 12.5 Leonidas, Stainless, .750 Switchblock-Micro, Wrench

    Stainless Barrel -7.62 x 51,  NATO match chamber

    • Fits DPMS/AR-10/SR-25
    • 1 in 10" twist
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Micro Switchblock®, .750
    • 5/8 x 24 threads
    • Medium Contour
    Learn More
  3. 07000295 : Barrel, 7.62x51, N6, 16.1, Stainless, .750 Gas Block, Lo-Pro, GT762R

    Stainless Barrel -7.62 x 51,  NATO match chamber

    • Fits DPMS/AR-10/SR-25
    • 1 in 10" twist
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Low Profile Gas Block, .750
    • 5/8 x 24 threads
    • Medium Contour
    Learn More
  4. 07000296 : Barrel, 7.62x51, N6, 16.1, Stainless, .750 Switchblock-Micro, Wrench

    Stainless Barrel -7.62 x 51,  NATO match chamber

    • Fits DPMS/AR-10/SR-25
    • 1 in 10" twist
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Micro Switchblock®, .750
    • 5/8 x 24 threads
    • Medium Contour
    Learn More
  5. 07000330 : Barrel, 7.62x51, N6, 13.7, Stainless, .750 Gas Block, Lo-Pro, GTL

    Stainless Barrel -7.62 x 51,  NATO match chamber

    • Fits DPMS/AR-10/SR-25
    • 1 in 10" twist
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Low Profile Gas Block, .750
    • 5/8 x 24 threads
    • Medium Contour
    Learn More
  6. 07000332 : Barrel, 22NOSLER, 16, Stainless, .750 Superlative Adjustable Gas Block, Wrench, GTIL

    22 Nosler Stainless Barrel

    • 1 in 8" twist, 3 land and groove rifling
    • Extended feed ramps
    • Bead blasted finish
    • Gas tube
    • Pinned Superlative Arms Adjustable Gas Block, .750
    • 1/2x28 threads
    • Medium Contour
    Learn More
  7. 100223-BLK : UPPER RECEIVER KIT, SR-25 6.5 APR, 22" BARREL, URX 4, M-LOK
    The 6.5mm Creedmoor Precision Rifle Upper Receiver Kit was created to provide SR-25 owners with drop-on cutting edge long-range performance. Whether on duty or in competition, 6.5mm Creedmoor delivers significantly improved ballistic co-efficient and muzzle velocity with reduced recoil, resulting in simplified solutions at mid-range and more consistent performance at long range. The 22” barrel strikes the perfect balance for across the board ammunition SD leveling and maneuverability. An 18” long URX 4 handguard provides ample space for in-line Night Vision, targeting devices, and range-finders while protecting the precision barrel. The 3-prong flash hider reduces firing signature while serving as a mounting platform for KAC’s line of 7.62 QDC suppressors. Learn More
  8. 10A810M16NGQ : 16" BIG Gunner .308 WIN Mid-Length 4150 Nitride

    Faxon's .308 continue our fantastic barrel-making with a bit more punch. We've updated our previous Medium-Taper profile taking into account customer feedback, optimizing the barrel to meet the Gunner brand's high standards.

    The .308 Big Gunner profile barrels are the big-brother to our famous 5.56 Gunner barrels. The Big Gunners feature a medium-taper behind the gas block. The gas block journal is set to .750" for compatibility with most common gas blocks and 1.9" in length for long blocks or aftermarket piston kits. From the gas block journal forward we use a thinner taper, designed to reduce weight yet maintain rigidity for high rates of fire and as a suppressor host.

    The Gunner barrels are ideal for any competition or duty use. When the seconds count, count on the Gunner profile.

    Barrel Material: 4150 CMV
    Barrel Type: Button Rifled
    Barrel Caliber: .308 WIN
    Barrel Twist: 1:10
    Barrel Length: 16”
    Barrel Profile: Big Gunner
    Barrel Gas System: Mid
    Inside Finish: Salt Bath Nitride        
    Outside Finish: Salt Bath Nitride    
    Muzzle Thread: 5/8-24
    Gas Block Diameter: .750"
    Gas Block Journal Length: 1.9"
    Barrel Extension: LR-308 (DPMS Compatible)
    Weight: 1.91 lbs
    Magnetic Particle Inspected
    11-degree Target Crown

    Learn More
  9. 10A810M16NPQ : 16" Pencil .308 WIN Mid-Length 4150 Nitride

    Faxon's pencil barrels are renowned for their lightweight performance. Fully stress relieved, we carefully designed the barrel's taper to remove weight while maintaining performance. The result is the lightest barrel in the industry - and one we are fully confident to put our Faxon shield on.

    Faxon's .308 barrels feature 1/10 twist rifling for full stabilization across all common .308 loadings. Our barrels are chambered to .308 Winchester SAAMI specification for maximum versatility. All our barrels are manufactured 100% in-house from cradle-to-grave, these barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.

    Quality is imbued into our barrels from the start. We start with the best materials, either certified 4150 Mil-Spec steel or 416-R Stainless. From there, each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges.

    Barrel Material: 4150 CMV
    Barrel Caliber: .308 WIN
    Barrel Twist: 1:10
    Barrel Length: 16”
    Barrel Profile: Pencil
    Barrel Gas System: Mid
    Inside Finish: Salt Bath Nitride         
    Outside Finish: Salt Bath Nitride     
    Muzzle Thread: 5/8-24
    Gas Block Diameter: .750"
    Gas Block Journal Length: 1.1"
    Barrel Extension: LR-308 (DPMS Compatible)
    Weight: 1.78 lbs
    Magnetic Particle Inspected
    11-degree Target Crown

    Learn More
  10. 10A810R18NGQ : 18" BIG Gunner .308 WIN Rifle-Length 4150 Nitride

    Faxon's .308 continue our fantastic barrel-making with a bit more punch. We've updated our previous Medium-Taper profile taking into account customer feedback, optimizing the barrel to meet the Gunner brand's high standards.

    The .308 Big Gunner profile barrels are the big-brother to our famous 5.56 Gunner barrels. The Big Gunners feature a medium-taper behind the gas block. The gas block journal is set to .750" for compatibility with most common gas blocks and 1.9" in length for long blocks or aftermarket piston kits. From the gas block journal forward we use a thinner taper, designed to reduce weight yet maintain rigidity for high rates of fire and as a suppressor host.

    The Gunner barrels are ideal for any competition or duty use. When the seconds count, count on the Gunner profile.

    Barrel Material: 4150 CMV
    Barrel Type: Button Rifled
    Barrel Caliber: .308 WIN
    Barrel Twist: 1:10
    Barrel Length: 18”
    Barrel Profile: Big Gunner
    Barrel Gas System: Rifle
    Inside Finish:  Salt Bath Nitride        
    Outside Finish: Salt Bath Nitride    
    Muzzle Thread: 5/8-24
    Gas Block Diameter: .750"
    Gas Block Journal Length: 1.9"
    Barrel Extension: LR-308 (DPMS Compatible)
    Weight: 2.13 lbs
    Magnetic Particle Inspected
    11-degree Target Crown

    Learn More
  11. 10A810R18NPQ : 18" Pencil .308 WIN Rifle-Length 4150 Nitride

    Faxon's pencil barrels are renowned for their lightweight performance. Fully stress relieved, we carefully designed the barrel's taper to remove weight while maintaining performance. The result is the lightest barrel in the industry - and one we are fully confident to put our Faxon shield on.

    Faxon's .308 barrels feature 1/10 twist rifling for full stabilization across all common .308 loadings. Our barrels are chambered to .308 Winchester SAAMI specification for maximum versatility. All our barrels are manufactured 100% in-house from cradle-to-grave, these barrels are fully stress relieved, air-gauge tested, and 11 degree target crowned to ensure superior accuracy.

    Quality is imbued into our barrels from the start. We start with the best materials, either certified 4150 Mil-Spec steel or 416-R Stainless. From there, each barrel goes through a battery of tests at each operation until finished in Nitride and final inspected. All barrels are individually checked for headspace by precision custom hardened gauges.

    Barrel Material: 4150 CMV
    Barrel Caliber: .308 WIN
    Barrel Twist: 1:10
    Barrel Length: 18”
    Barrel Profile: Pencil
    Barrel Gas System: Rifle
    Inside Finish: Salt Bath Nitride         
    Outside Finish: Salt Bath Nitride     
    Muzzle Thread: 5/8-24 TPI
    Gas Block Diameter: .750"
    Gas Block Journal Length: 1.1"
    Barrel Extension: LR-308 (DPMS Compatible)
    Weight: 1.97 lbs
    Magnetic Particle Inspected
    11-degree Target Crown

    Learn More
  12. 10A810R20NGQ : 20" BIG Gunner .308 WIN Rifle-Length 4150 Nitride

    Faxon's .308 continue our fantastic barrel-making with a bit more punch. We've updated our previous Medium-Taper profile taking into account customer feedback, optimizing the barrel to meet the Gunner brand's high standards.

    The .308 Big Gunner profile barrels are the big-brother to our famous 5.56 Gunner barrels. The Big Gunners feature a medium-taper behind the gas block. The gas block journal is set to .750" for compatibility with most common gas blocks and 1.9" in length for long blocks or aftermarket piston kits. From the gas block journal forward we use a thinner taper, designed to reduce weight yet maintain rigidity for high rates of fire and as a suppressor host.

    The Gunner barrels are ideal for any competition or duty use. When the seconds count, count on the Gunner profile.

    Barrel Material: 4150 CMV
    Barrel Type: Button Rifled
    Barrel Caliber: .308 WIN
    Barrel Twist: 1:10
    Barrel Length: 20”
    Barrel Profile: Big Gunner
    Barrel Gas System: Rifle
    Inside Finish: Salt Bath Nitride        
    Outside Finish: Salt Bath Nitride    
    Muzzle Thread: 5/8-24 TPI
    Gas Block Diameter: .750"
    Gas Block Journal Length: 1.9"
    Barrel Extension: LR-308 (DPMS Compatible)
    Weight: 2.24 lbs
    Magnetic Particle Inspected
    11-degree Target Crown

    Learn More
  13. 111468 : UPPER RECEIVER KIT, SR-25 ACC, 14.5" BARREL, URX 4, M-LOK
    The SR-25 14.5” Combat Carbine Upper kit is the latest evolution in the lightweight 7.62mm NATO Carbine platform. The 14.5” CC provides 7.62mm NATO performance in a package of comparable weight and size to common lower caliber platforms. Featuring our newly designed lightweight 14.5” barrel and a 7.62mm QDC Flash Suppressor, the 14.5” CC upper is the ultimate choice in battle rifle performance. This complete upper assembly comes standard with a 13” URX 4 M-LOK handguard, Knight’s Armament Micro Front Sight, Knight’s Armament Micro 600m Rear Sight, SR-25 Buffer, SR-25 Action Spring, and Magpul M-LOK cover kit. Learn More
  14. 111470 : UPPER RECEIVER KIT, SR-25 ACC, 16" BARREL, URX 4, M-LOK
    The SR-25 16” Combat Carbine Upper kit is the latest evolution in the lightweight 7.62mm NATO Carbine platform. The 16” CC provides 7.62mm NATO performance in a package of comparable weight and size to common lower caliber platforms. Featuring our lightweight 16” barrel and a QDC Flash Suppressor, the 16” CC upper is the ultimate choice in battle rifle performance. This complete upper assembly comes standard with a 15” URX 4 M-LOK handguard, Knight’s Armament Micro Front Sight, Knight’s Armament Micro 600m Rear Sight, SR-25 Buffer, SR-25 Action Spring, and Magpul M-LOK cover kit. Learn More
  15. 111474 : UPPER RECEIVER KIT, SR-25 APC, 16" BARREL, URX 4, M-LOK
    The SR-25 Precision Carbine Upper Kit was built as a dual role 7.62mm NATO Carbine. Every PC is equally adept at putting rounds on target at 1000 meters or rapid multi-shot engagement at close range distances. Featuring our 16” cut rifled, precision barrel and our newly designed QDC Flash Suppressor, the 16” PC upper is the ultimate choice in the precision carbine world. This complete upper assembly comes standard with a 15” URX 4 M-LOK handguard, Knight’s Armament Micro Front Sight, Knight’s Armament Micro 600m Rear Sight, SR-25 Buffer, SR-25 Action Spring, and Magpul M-LOK cover kit. Learn More
  16. 18610 : Shotgun 1100™/11-87™ 12Ga Stock & Fore-end Black Synthetic with SuperCell™ recoil pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  17. 19258 : Gas System Kit - 1100™/1187™ Piston - Piston Seal & 3 Barrel Seals N/A
    • Genuine factory replacement parts
    • Stainless steel piston/piston seal
    • Teflon-coated barrel seals
    • Fits all Model 1100T and 11-87T 12Ga Shotguns
    Learn More
  18. 19264 : Barrel Seal / O-Ring - 3 Pack N/A rubber

    The only fitting choice for your Remington shotgun.Whether you want your Remington shotgun to perform like two, or you’re restoring “an old friend,” never compromise on our superb craftsmanship and dependability.

    Learn More
  19. This Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington Shotgun to accept a sling. Fits all Pre-2010 Remington Model 870, 1100, and 11-87 12 & 16 gauge shotguns. Rear swivel stud screws right into the butt of the shotgun"s stock.

    Learn More
  20. 19471 : SuperCell™ Recoil Pad Shotguns with Wood Stocks Black Cellular Polyurethane
    $26.77

    The world's most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870T generate up to 54% less recoil than our leading competitors' autoloading shotguns with factory pads. Its millions of tiny SuperCellT absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCellT recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870T produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCellT technology is the product of 10 years' rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCellT, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a "kick" to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that's extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we've pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCellT, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCellT era.

    Learn More
  21. 19472 : SuperCell™ Recoil Pad Shotguns with Synthetic Stocks Black Cellular Polyurethane

    The world’s most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870™ generate up to 54% less recoil than our leading competitors’ autoloading shotguns with factory pads. Its millions of tiny SuperCell™ absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCell™ recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870™ produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCell™ technology is the product of 10 years’ rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCell™, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a “kick” to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that’s extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we’ve pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCell™, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCell™ era.

    Learn More
  22. 19481 : Adjustable Length Of Pull Spacer Kit Black

    Now standard on all Compact shotguns, our new Adjustable Length of Pull System makes it simple to tailor the fit of your firearm - all the way up to standard size. This system allows the LOP to grow with youngsters and be modified to the precise specification of all shooters of smaller stature. A total 1" of adjustment brings Compact buttstocks (1" shorter LOP than standard) up to standard size in 1/4" and 1/2" increments.

    It's also available as an accessory for use on other Remington firearms.

    Learn More
  23. 19485 : Shotgun 1100™/11-87™ 12Ga Monte Carlo Stock & Fore-end Black Synthetic with SuperCell R Pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  24. 19548 : Shotgun 1100™/11-87™ ShurShot® 12Ga Stock & Fore-end Black Synthetic with SuperCell™ R Pad
    $121.14

    The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

    Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

    The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

    Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

    Learn More
  25. 23383 : URX II/3 BARREL NUT WRENCH, SR-25
    SR-25 URX wrench. This wrench is required when installing a URX rail system on an SR-25 rifle. Learn More
  26. 24124-1 : 7.62 URX II FOREND ASSEMBLY, RIFLE LENGTH SASS
    The KAC SR-25 URX II is a commercial version of the handguard that is used on the US military's M110 Semi-Auto Sniper System (SASS). This free floating forend features an integral, flip-up front sight assembly that folds flush with the continuous top rail when not in use, creating a seamless look. Full length mil-spec M1913 Picatinny rails are located at the 3-, 6-, and 9 o'clock positions, making the URX II compatible with any number of rail-mounted tactical accessories. Learn More
  27. 30259 : 7.62 URX 3.1 FOREND ASSEMBLY, RIFLE LENGTH, EXTENDED TOP RAIL, 13.5"
    The KAC 7.62 URX 3.1 Rail is a free floating, fully modular replacement forend for the SR-25 platform. Unlike traditional quad rail designs, the URX 3.1 incorporates short sections of M1913 Picatinny rail at its front and rear ends for mounting tactical accessories, eliminating the commonly unused sections of rail for reduced overall weight and a more comfortable grip. A total of 4 integral QD sling swivel sockets are provided for ambidextrous sling compatibility. Add-on KAC URX 3.1 Rail Panels and additional rail sections allow shooters to customize the forend to their needs (both sold separately). Learn More
  28. 30305 : SR-25 MAGAZINE, 5-RD CAPACITY (PINNED 20-ROUND BODY)
    Picatinny rail scope cap allows for attaching accessory sighting systems.This Modified 20-Round SR-25 Magazine has been pinned to permanently reduce its capacity to 5-Rounds. Perfect for use in locations with magazine capacity restrictions and for hunting. Learn More
  29. 30538 : 7.62 AMBIDEXTROUS CHARGING HANDLE ASSEMBLY
    The KAC 7.62mm Ambidextrous Charging Handle is another step forward in the effort to deliver the most ergonomic firearm accessories to the end user. Intermediate sized latch pads are easily accessible and permit manipulation of the charging handle with a pinch-grip, index finger hook, or knifehand from either side of the receiver, without over-protrusion posing a snag hazard. Innovative design will not cause the handle to lock-up even if one of the latches is damaged. Learn More
  30. 30560 : SR-25E2 BOLT ASSEMBLY
    Knight‵s Armament Company
    30560 : SR-25E2 BOLT ASSEMBLY
    KAC - Knight's Armament SR-25 E2 Complete Bolt Assembly. Includes a complete bolt with extractor, ejector and gas rings. Learn More
  31. 31300 : SR-25 FIELD REPAIR KIT (E2 BOLT)
    Knight‵s Armament Company
    31300 : SR-25 FIELD REPAIR KIT (E2 BOLT)

    Contains:

    99077 - Firing Pin

    91428 - Cam pin

    30559 - Ejector (x2)

    30564 - Ejector Spring (x2)

    25482-1 - Ejector Retaining Pin

    99075 - Extractor

    91492 - Extractor Spring

    94065 - Extractor Pivot Pin

    99164 - Extractor Buffer

    21002 - Gas Rings

    Learn More
  32. 31489 : M110/SR-25 COLLAPSIBLE STOCK CONVERSION KIT (NO STOCK)

    Items included – Buffer Tube, Buffer Spring, Buffer, Endplate, Castle Nut

    Weight -11.8 oz

    Learn More
  33. 32310 : UPPER RECEIVER KIT, SR-30 MOD 2, 9.5" BARREL, URX 4, M-LOK
    The SR-30 E3 MOD 2 takes advantage of the .300 BLK, offering a 9.5” barrel that is as capable as an 11.5” 5.56mm SBR, for a significantly more transportable and maneuverable firearm. The QDC compatible Flash Hider will mount any of the KAC 7.62mm QDC suppressors. The SR-30 has 99% parts compatibility with the SR-15, requiring only a dedicated barrel and muzzle device. Seamlessly transition from subsonic ammunition to supersonic with nothing more than a change of the magazine. Learn More
View as List Grid

Items 1-50 of 92

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.