Firearms

View as List Grid

Items 1-50 of 67

Page
per page
Set Descending Direction
In Stock
Shop By
  1. 18610 : Shotgun 1100™/11-87™ 12Ga Stock & Fore-end Black Synthetic with SuperCell™ recoil pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  2. 19258 : Gas System Kit - 1100™/1187™ Piston - Piston Seal & 3 Barrel Seals N/A
    • Genuine factory replacement parts
    • Stainless steel piston/piston seal
    • Teflon-coated barrel seals
    • Fits all Model 1100T and 11-87T 12Ga Shotguns
    Learn More
  3. 19264 : Barrel Seal / O-Ring - 3 Pack N/A rubber

    The only fitting choice for your Remington shotgun.Whether you want your Remington shotgun to perform like two, or you’re restoring “an old friend,” never compromise on our superb craftsmanship and dependability.

    Learn More
  4. This Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington Shotgun to accept a sling. Fits all Pre-2010 Remington Model 870, 1100, and 11-87 12 & 16 gauge shotguns. Rear swivel stud screws right into the butt of the shotgun"s stock.

    Learn More
  5. 19471 : SuperCell™ Recoil Pad Shotguns with Wood Stocks Black Cellular Polyurethane
    $26.77

    The world's most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870T generate up to 54% less recoil than our leading competitors' autoloading shotguns with factory pads. Its millions of tiny SuperCellT absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCellT recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870T produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCellT technology is the product of 10 years' rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCellT, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a "kick" to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that's extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we've pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCellT, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCellT era.

    Learn More
  6. 19472 : SuperCell™ Recoil Pad Shotguns with Synthetic Stocks Black Cellular Polyurethane
    $26.77

    The world’s most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870™ generate up to 54% less recoil than our leading competitors’ autoloading shotguns with factory pads. Its millions of tiny SuperCell™ absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCell™ recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870™ produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCell™ technology is the product of 10 years’ rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCell™, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a “kick” to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that’s extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we’ve pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCell™, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCell™ era.

    Learn More
  7. 19481 : Adjustable Length Of Pull Spacer Kit Black

    Now standard on all Compact shotguns, our new Adjustable Length of Pull System makes it simple to tailor the fit of your firearm - all the way up to standard size. This system allows the LOP to grow with youngsters and be modified to the precise specification of all shooters of smaller stature. A total 1" of adjustment brings Compact buttstocks (1" shorter LOP than standard) up to standard size in 1/4" and 1/2" increments.

    It's also available as an accessory for use on other Remington firearms.

    Learn More
  8. 19485 : Shotgun 1100™/11-87™ 12Ga Monte Carlo Stock & Fore-end Black Synthetic with SuperCell R Pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  9. 19548 : Shotgun 1100™/11-87™ ShurShot® 12Ga Stock & Fore-end Black Synthetic with SuperCell™ R Pad

    The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

    Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

    The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

    Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

    Learn More
  10. 34116 : Smith&Wesson M&P Full Size 357Sig 4.25" Standard Length

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  11. 34117 : Smith&Wesson M&P Full Size 357Sig 4.95" Extended Length 2 Ports

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  12. 34119 : Smith&Wesson M&P Full Size 40S&W 4.95" Extended Length 9/16-24 Thread W/Thread Protector

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  13. 34126 : Smith&Wesson M&P Full Size 9mm 4.25" Standard Length

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  14. 34128 : Smith&Wesson M&P Full Size 9mm 4.95" Extended Length 1/2-28 Thread W/Thread Protector

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  15. 34129 : Smith&Wesson M&P Full Size 9mm 4.95" Ext Length 1/2-28 Thread W/Thread Protector Iso.QPQ Bl

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  16. 34130 : Smith&Wesson M&P Full Size 9mm 4.95" Extended Length 2 Ports

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  17. 34134 : Smith&Wesson M&P Full Size 9mm Conversion 4.95" Ext Length 1/2-28 Thread W/TP Iso. QPQ - Blk

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  18. 90070 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch LoP, soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  19. 90080 : Urbino® Pistol Grip Stock Remington® 870™, 1100™, 11-87™ Riser, Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  20. 90210 : SureShell® Carrier for Remington 6 Shell 12Ga Left Side

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  21. 90320 : SureShell® Carrier for Remington 4-Shell 12Ga Left Side

    SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.

    Learn More
  22. 90420 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 8 Shell 12Ga Left side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  23. 90580 : SureShell® Aluminum Carrier for Remington® 870™/1100™/11-87™ (2-Shot 12Ga Left Side)

    Mesa Tactical Lightweight aluminum shotshell holder attaches to the left side of the shotgun receiver.

    Learn More
  24. 90860 : Trigger Pin Replacement Kit for Remington® 870/1100/1187

    The trigger pin replacement kits, also known as "anti-walk" pins, can be installed in Remington 870/1100/1187 shotguns to secure the trigger pins in place. These kits are incompatible with receiver mounted SureShell carriers or side Picatinny rails.

    Learn More
  25. 91260 : LEO® Telescoping Stock Kit for Remington 870™ 12Ga

    Adapts AR-15 style butt stocks and pistol grips for use with Remington 870 and Mossberg 500/590 shotguns to gives the shotguns similar handling characteristics to the AR-15.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  26. 91520 : Pocket Push Button Sling Mount for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  27. 91530 : Pocket Ambi Push Button Sling Mount for Urbino® Stock for Remington® 870™,1100™, 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  28. 91540 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Limbsaver 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  29. 91550 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Riser. Limbsaver. 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock for is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  30. 91570 : Pocket Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  31. 91600 : Pocket Ambi Sling Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  32. 91610 : Pocket Ambi Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  33. 91800 : Rear Hook Loop for Urbino® Stock for Remington® Semi-auto 1100™, 11-87™ 12Ga

    The Urbino Tactical stock features a Benelli-style rear sling plate for installation of two-point slings. The installation of this component is entirely optional. Unlike the Benelli version, the Mesa Tactical Urbino Tactical stock sling plate accepts US military standard 1¼ inch sling webbing.

    Learn More
  34. 93010 : Mohawk™ Forend for Remington Versa Max® 12Ga Black

    The MohawkT forend for Remington® Versa Max® is a development of an injection molded nylon forend for semi-automatic shotguns.

    This modular forend design provides accessory and sling mounting flexibility.

    Learn More
  35. 93110 : Urbino® Pistol Grip Stock & Mohawk™ Forend for Remington® Versa Max® (STD Butt, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  36. 93120 : Urbino® Pistol Grip Stock & Mohawk™ Forend for Rem Versa Max® (Riser, STD Butt, 12-GA) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  37. 93130 : Urbino® Pistol Grip Stock & Mohawk Forend for Rem Versa Max® (Limbsaver, 12Ga) Black

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), Santoprene rubber grip, Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  38. 93140 : Urbino® Pistol Grip Stock & Mohawk Forend for Rem Versa Max® Riser, Limbsaver, 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  39. 93240 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 4 Shell 20Ga Left Side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  40. 93250 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 6 Shell 20Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  41. 93260 : SureShell® Carrier for Remington® 870™, 1100™, 11-87™ 8-Shell 20Ga - Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  42. 93330 : Receiver-back Ambi Hook Loop for Remington® Shotgun

    Our innovative Sling and Hook Loops provide a way to securely attach a tactical sling directly to the shotgun receiver. They are excellent solutions for single-point slings, or for the receiver end attachment of three-point slings. The can be employed as alternatives to Burnsed loops or other attachment methods that are incompatible with custom stocks. In addition to sling mounts replacing the rear trigger pin, we also offer a limited line of hook loops that mount behind the Remington 870 receiver, between the receiver and the factory stock. These were produced at the request of a large US Federal enforcement agency. Unlike similar designs, the Mesa Tactical hook loops are machined from 1018 carbon steel, then given a mil-spec manganese phosphate finish. Some fitting with a file may be required.

    Learn More
  43. 93490 : Urbino® Pistol Grip Stock for Remington® Versa Max® (Standard Butt 12Ga) Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  44. 93500 : Urbino® Pistol Grip Stock for Remington® Versa Max® Riser, Standard Butt 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  45. 93510 : Urbino® Pistol Grip Stock for Remington® Versa Max® Limbsaver, 12Ga - Black

    The rugged Urbino Tactica

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), Santoprene rubber grip, Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    l stock features a "tactical" 12½ inch length of pull (LoP), Santoprene rubber grip, Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  46. 93520 : Urbino® Pistol Grip Stock for Remington® Versa Max® Riser, Limbsaver 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a "tactical" 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  47. 93650 : SureShell® Carrier and Rail for Remington Versa Max® 4 Shell 12Ga 7" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a "saddle" style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  48. 93660 : SureShell® Carrier and Rail for Remington Versa Max® 6 Shell 12Ga 7" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a "saddle" style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  49. 93670 : SureShell® Carrier and Rail for Remington Versa Max® 8 Shell 12Ga 7" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mount via a "saddle" style method (Remington shotguns) or by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  50. 93950 : Rear Hook Loop for Urbino® Stock for Remington Versa Max® 12Ga

    The Urbino Tactical stocks include stamped steel sling plates that mimic the factory Benelli rear sling plates.  We
    have produced replacement stampings that feature a circular hook loop instead of the sling loop for use with in-
    creasingly  popular  H&K  style  (dog  leash)  sling  hooks.    These  hook  loops  are  stamped  steel  with  a  tough  mil-spec manganese phosphate finish.

    Learn More
View as List Grid

Items 1-50 of 67

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.