Firearms

View as List Grid

12 Items

per page
Set Descending Direction
In Stock
Shop By
  1. 05-636B : Super Charging Handle MPX - Black

    The MPX Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. This product was designed specifically for use in Sig Sauer’s MPX platform.

    Learn More
  2. 05-636S : Super Charging Handle MPX - Sand

    The MPX Super Charging Handle (SCH®) is 3D machined from a solid block of aircraft grade 7075-T6 aluminum. Its ambidextrous design allows for seamless operation from either side of the weapon. This product was designed specifically for use in Sig Sauer’s MPX platform.

    Learn More
  3. 681 : AR PCC SINGLE STAGE CURVED SHOE 3 LB

    A drop in, complete assembly trigger

    Pull weight 2.5 - 3 pounds for both curved and straight shoe models

    The trigger makes use of your rifle's original hammer/trigger pins as well as safety

    Offered in straight or curved trigger shoe

    This Timney set the standard for aftermarket trigger upgrades for the AR/M4 rifle

    Learn More
  4. 681-ST : AR PCC SINGLE STAGE, STRAIGHT SHOE 3 LB

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering four models for the MPX - single-stage, two-stage and curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of three-pounds for the single stage and a two-pound first stage and two-pound second stage for the two-stage model.

    Both triggers are a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  5. 682 : AR PCC 2 STAGE CURVED SHOE 2 LB FIRST  STAGE 2 LB SECOND STAGE

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering two models for the MPX curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of four pounds with a  two-pound first stage and two-pound second stage for the two-stage model.

    The trigger is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  6. 682-ST : AR PCC 2 STAGE, STRAIGHT SHOE 2 LB FIRST  STAGE 2 LB SECOND STAGE

    The Timney replacement trigger for the SIG MPX carbine rifle is the latest in the Timney lineage of AR-style, semi-automatic, replacement triggers.  Timney is offering two models for the MPX curved and straight shoe options for each model.

    The trigger, hammer, and bridge are constructed of heat-treated steel.  The housing is machined 6061, T6 anodized alloy and the trigger is factory calibrated for a pull weight of four pounds with a  two-pound first stage and two-pound second stage for the two-stage model.

    The trigger is a self-contained, 100% drop-in trigger ready to install in your rifle for an exceptionally smooth, crisp, trigger pull with no gunsmithing, fitting, or adjusting required.

    Learn More
  7. 683S : SIG MPX SINGLE STAGE CURVED TRIGGER 4.5LB**

    Timney is the market leader for Sig replacement rifle triggers. A drop in, complete assembly trigger. The trigger is factory tuned for 4.5 lb. pull weight, with no creep. The trigger makes use of your rifle's original hammer/trigger pins as well as safety.

    • Single stage trigger
    • Trigger allows you to become more accurate with your rifle
    • No gunsmith needed, easy to install
    • Ready for the range, no adjustments needed
    • No additional parts needed to install trigger
    • Crisp feel
    Learn More
  8. R0171 : Raptor Ambidextrous Charging Handle for SIG MPX

    You asked, we listened: introducing RaptorT Ambidextrous Charging Handles for SIG MPXT & SIG MCXT. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm "blading" or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. These variants are compatible with all generations of semi-auto and full-auto SIG MPX/MCX firearms. The Support Arm is recommended but not required for Raptor installation, and is not compatible with factory SIG MPX/MCX charging handles.

    Designed & manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries

    Learn More
  9. R0367 : Raptor-LT SIG MPX Charging Handle w/ Support Arm - BLACK LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Learn More
  10. R0369 : Raptor-LT SIG MPX Charging Handle w/ Support Arm - GREY LT
    Introducing the Raptor-LT Ambidextrous Charging Handle for SIG MPX™. The patented Raptor provides improved ergonomics and functionality compared to the factory variants. Its ambidextrous design allows rapid palm “blading” or finger-thumb charging of the weapon, ensuring the motion is fluid and fast from either strong or support side. The included Support Arm, which replaces the factory spring plate/housing, biases the Raptor upward to minimize scratching or damage to the receiver often caused by the factory charging handle. Utilizing the same patented ambidextrous functionality as its predecessor, the Raptor-LT handles are machined from 7075 aluminum, MILSPEC Type III hard anodized, then over-molded with high-strength, fiberglass reinforced polymer for the ultimate combination of strength, weight, and durability. The Raptor-LT is available in black, flat dark earth, and grey, all designed to match standard Magpul® color offerings. Like all Radian products, the Raptor-LT comes with a limited lifetime warranty, and is 100% designed and manufactured in the USA. SIG MPX & SIG MCX are Trademarks of SIG SAUER Inc. registered in the United States & Other Countries. Learn More
View as List Grid

12 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.