Firearms

View as List Grid

47 Items

per page
Set Descending Direction
In Stock
Shop By
  1. 4256-BK : ERGO Short M-LOK Mossberg 500/590 Tri Rail

    M-LOK forend for Mossberg 500/590 SHOCKWAVE
    M-LOK rails at 3, 6, and 9 o’clock
    Extremely light-weight and low profile.
    Hard Black type III anodized 6061-T6 Aluminum

    Learn More
  2. 4454 : Tactical Stock Adapter Mossberg 500®
    Use the Ergo Grip Tactical Stock Adaptor to install AR-15 type stocks and pistol grips on your Remington 870 or Mossberg 500/590 shotguns. Learn More
  3. 4456 : Stock Adapter Mossberg 500/590 - .410 gauge

    Use the ERGO .410 GA Shotgun Stock Adapter to install AR style stocks and pistol grips on your Mossberg 590. Will fit with a pistol arm brace on the SHOCKWAVE and accommodates mil spec or commercial buffer tubes.

    Learn More
  4. 4763-BK : ERGO 5-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum.

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend

    Learn More
  5. 4764-BK : ERGO 8-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend

    Learn More
  6. 4765-BK : ERGO 10-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend.

    Learn More
  7. 4766-BK : ERGO 5-Slot KeyMod™ Aluminum LoPro Cantilever U.M.P. Picatinny Rail - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend.

    Learn More
  8. 4865 : ERGO Trirail Forend Standard Length Mossberg 500/590 6 15/16 Lenght - Black

    ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

    Learn More
  9. 4865-SHORT : ERGO Trirail Forend Mossberg 500/590 5 13/16 Length - Black

    ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

    Learn More
  10. 4872 : ERGO Standard M-LOK Length Mossberg 500/590 Forend

    M-LOK forend for Mossberg 500/590
    M-LOK rails at 3, 6, and 9 o'clock
    Extremely light-weight and low profile.
    6 15/16? LENGTH
    Hard Black type III anodized 6061-T6 Aluminum

    Learn More
  11. 4969-MOSS : ERGO Double Sling Loop Shotgun End Plate Mossberg 500/590 Ambidextrous Black

    The ERGO Double Sling Loop Shotgun End Plate provides Mossberg 500/590 shooters with an ambidextrous sling point. If used with a pistol grip stock a longer screw may be needed.

    Learn More
  12. 90390 : SureShell® Carrier for Mossberg 500 6 Shell 12Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  13. 91070 : LEO Gen II Telescoping Hydraulic Recoil Stock Kit for Beretta 1301 (12-GA)

    Adapts AR-15 style butt stocks and pistol grips for use with Beretta 1301 semi-automatic shotguns to gives the shotgun similar handling characteristics to the AR-15. Our complete stock kits include the aluminum AR adapter; Hogue rubber overmolded grip; US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly; and all necessary assembly hardware and instructions. The optional recoil buffer can absorb felt recoil by up to 70%.

    Learn More
  14. 92280 : High-tube® Telescoping Recoil Stock & Adapter Rail for Mossberg 500 9" rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (included). High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others. Our complete stock kits include the aluminum AR adapter; Hogue rubber overmolded grip; US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly; and all necessary assembly hardware and instructions.

    Learn More
  15. 92620 : Hook & Loop SureShell Mount for Moss 500 (6-Shell, 12-GA)

    NOTE: these Hook & Loop Mount kits do not include the Hook & Loop SureShell carriers, which are sold separately.

    While Mesa Tactical's development focus has long been on the needs of the professional tactical operator, we have nonetheless enjoyed some acceptance in the tactical competition community, especially Three Gun.  In response to a long expressed desire from Three Gun competitors for a quick-release version of our popular on-gun shell carriers, we've introduced Hook & Loop SureShell carriers.

    Hook & Loop SureShell carriers combine our SureShell Polymer carrier yoke with 3M SJ3572 hook fastener material laminated to a 3/32? Formex 94 substrate.  This allows Hook & Loop SureShell carriers to be easily attached to and removed from surfaces, such as shotgun receivers and MOLLE vests, covered with mating loop material.

    The Hook & Loop SureShell carriers are sold with adhesive backed 3M SJ3571 loop fastener that can be glued directly to a shotgun receiver.  For Three Gun competitors who do not want to permanently affix the loop fastener material to their shotguns, we also offer loop fastener bracket kits that are attached mechanically and can be easily removed at any time.

    Learn More
  16. 93620 : SureShell® Carrier and Rail for Mossberg 500 4 Shell 12Ga 4.5" rail black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  17. 93630 : SureShell® Carrier and Rail for Mossberg 500 6 Shell 12Ga 4.5" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  18. 93640 : SureShell® Carrier and Rail for Mossberg 500 8 Shell 12Ga 4.5" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  19. 94750 : SureShell® Polymer Carrier for Mossberg 500/590 & Maverick 88® (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
  20. 95160 : SureShell® Aluminum Carrier for Mossberg 500/590 & Maverick 88® (4-Shell 20Ga) Left S - Blk

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  21. 95170 : SureShell® Aluminum Carrier for Mossberg 500/590 & Maverick 88® (6-Shell 20Ga)

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  22. 95180 : SureShell® Aluminum Carrier for Mossberg 500/590 & Maverick 88® (8-Shell 20Ga)

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  23. 95330 : High-tube® Telescoping Hydraulic Recoil Stock Kit for Moss 500/590 & Mav 88 12Ga, no rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (not-included).

    High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  24. 95350 : High-tube® Telescoping Stock Adapter for Moss 500/590 and Mav 88 12Ga no rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (not included).

    High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others.

    Learn More
  25. 95370 : High-tube® Telescoping Stock Kit for Moss 500/590 & Mav 88 12Ga, no rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (Not-included).

    High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip,US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  26. 95380 : High-tube® Telescoping Stock Kit for Rem 870™ 12Ga no rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (not-included).

    High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  27. 95650 : LEO Gen I Hydraulic Recoil Starter Pack for Moss 500/590 and Mav 88 (12-GA)

    Adapter with recoil tube only

    The stock adapters are investment cast aircraft grade aluminum, machined and powder coated black with a tough, chemical resistant finish. The LEO adapter is our best selling model, and features an optimal stock elevation allowing the use of iron sights or even the bead sight. All LEO adapters accept optional pushbutton sling swivels, and Remington 870 LEO adapters can accept stamped steel pocket sling loop and hook loops.

    Learn More
  28. CF-KAHR-PM9 : CenterFire Laser for Kahr PM9, PM40, P9, P40, CM9, CM40, CT9, CT40, CW9 & CW40) - Red

    An essential sighting tool for training, concealed carry, home defense, and backup use, the CF-KAHR-PM9 projects a bright red aiming point downrange - the perfect complement to Kahr"s small and easily concealed subcompact pistols chambered in 9mm and .40 S&W. Refer to the Firearm Compatibility for a complete list of models that this sight fits.

    Rounded and blended to ensure a smooth draw, the CF-KAHR-PM9 mounts to the frame without permanent alteration and offers ambidextrous switching to accommodate both right and left-handed shooters. Most operators report immediate improvement to hit ratios after installing a CenterFire laser sight.

    Learn More
  29. MAG490-BLK : SGA® Stock - Mossberg® 500/590/590A1 - Black

    The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Mossberg 500/590/590A1 12ga series of shotguns. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories,
    the Mossberg SGA brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, and Orange to adapt to the mission at hand.

    Made in U.S.A.

    Learn More
  30. MAG490-FDE : SGA™ Stock - Mossberg® 500/590/590A1 - Flat Dark Earth

    The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Mossberg 500/590/590A1 12ga series of shotguns. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories,
    the Mossberg SGA brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, and Orange to adapt to the mission at hand.

    Made in U.S.A.

    Learn More
  31. MAG490-GRY : SGA® Stock - Mossberg® 500/590/590A1 - Stealth Gray

    The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Mossberg 500/590/590A1 12ga series of shotguns. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories, the Mossberg SGA brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, and Orange to adapt to the mission at hand.

    Made in U.S.A.

    Learn More
  32. MAG490-ORG : SGA™ Stock - Mossberg® 500/590/590A1 - Orange

    The SGA Stock is an ambidextrous, user-configurable buttstock designed to add much-needed adjustability to the tried and true Mossberg 500/590/590A1 12ga series of shotguns. Featuring a spacer system for length of pull adjustment, improved grip ergonomics, recoil-reducing butt-pad, optional cheek risers for use with optics/raised sights, and other accessories,
    the Mossberg SGA brings Magpul design and engineering to another classic American firearm. Available in Black, Flat Dark Earth, and Orange to adapt to the mission at hand.

    Made in U.S.A.

    Learn More
  33. MAG492-BLK : SGA™ Receiver Sling Mount - Mossberg® SGA Stock - Black

    The SGA Receiver Sling Mount is a connection point for the Mossberg 500/590/590A1 SGA Shotgun Stock and one-point clip-in style attachments such as the MS3 Paraclip™, the HK® hook, ITW™ MASH hook, and others. Made from precision cast steel that is Melonite® treated for wear and corrosion resistance. Dedicated fit for the Magpul SGA Stock, the Receiver Sling Mount can be installed on either the left or right side of the front of the stock.

    Made in U.S.A.

    Learn More
  34. MAG493-BLK : Forward Sling Mount - Mossberg® 500/590 - Black

    The Forward Sling Mount is a sling attachment point for the Mossberg 590A1 series of shotguns which clamps onto the barrel and magazine tube. Designed specifically for the A1"s heavy walled barrels, it can be configured for use with either Push-Button QD Sling Swivels or one-point clip-in style attachments such as the MS3 Paraclip™, the HK® hook, ITW™ MASH hook, and others. Made from precision cast steel that is Melonite® treated for wear and corrosion resistance. Dedicated fit for Mossberg 590A1 models with factory extended magazine tube and will not fit other Mossberg models.

    Made in U.S.A.

    Learn More
  35. MAG494-BLK : MOE® M-LOK™ Forend - Mossberg® 590/590A1 - Black

    The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation.

    Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty.

    Made in U.S.A.

    Learn More
  36. MAG494-FDE : MOE® M-LOK™ Forend - Mossberg® 590/590A1 - Flat Dark Earth

    The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation.

    Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty.

    Made in U.S.A.

    Learn More
  37. MAG494-GRY : MOE® M-LOK™ Forend - Mossberg® 590/590A1 - Stealth Gray

    The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation.

    Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty.

    Made in U.S.A.

    Learn More
  38. MAG494-ORG : MOE® M-LOK™ Forend - Mossberg® 590/590A1 - Orange

    The MOE M-LOK Forend is a drop-in replacement for the Mossberg 590/590A1* 12ga shotguns, featuring an extended length and front/rear hand stops for improved weapon manipulation.

    Now updated with M-LOK slots for compatibility with all M-LOK accessories, this Forend adds modularity to the proven Mossberg platform for sporting use, home defense, or on duty.

    Made in U.S.A.

    Learn More
  39. MI-RDDMH : Factory Ruger PC9 M-Lok Handguard

    Features

    • Lightweight design with a slim profile
    • True Free Float Design
    • Mounting bolt and wrench included
    • 12.0" overall length
    • Three built in anti-rotation QD sockets
    • Features 8 sides of M-Lok slots
    • 5-slot polymer M-Lok rail included
    • Weight 10.9 oz installed
    • Construction from 6061 aluminum, Type 3 hard coat anodized for a lifetime of service
    • Fully dehorned for a non-abrasive, comfortable feel
    • MI Lifetime Warranty
    • 100% Made in America - Keeps America Working
    • US Patent Pending
    Learn More
  40. MI-RPCC : MI Chassis Compatible with Ruger® PC Carbine™, 6-Position Mil-Spec Tube

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Mil-Spec Diameter 6-Position Stock Tube – Waterproof Compartment
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 11oz Installed (Without customer supplied stock/grip)
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*

    Learn More
  41. MI-RPCCSF : MI Chassis Compatible with Ruger® PC Carbine™, Railed for Side Folder

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Rail on Receiver for Clamp On Stock
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 6oz Installed
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*
    *Side folding stock/brace not included*

    Learn More
View as List Grid

47 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.