Firearms

Shop By
View as List Grid

15 Items

per page
Set Descending Direction
In Stock
  1. M1-SF-B : M14/M1A Improved Modstock (SELECT-FIRE)

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  2. M1-SF-G : M14/M1A Improved Modstock (SELECT-FIRE)

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  3. M1-SF-R : M14/M1A Improved Modstock (SELECT-FIRE)

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  4. M1-SF-T : M14/M1A Improved Modstock (SELECT-FIRE)

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  5. M1-SS-B : M14/M1A Improved Modstock

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  6. M1-SS-G : M14/M1A Improved Modstock

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  7. M1-SS-R : M14/M1A Improved Modstock

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  8. M1-SS-T : M14/M1A Improved Modstock

    While our original M14/M1A Stock System has been the essential upgrade to the Springfield SOCOM platform, we saw huge areas of improvement. The stock system is now formed with VLTOR's proprietary mold and is manufactured with a proprietary carbon fiber composite. This makes the stock system stronger and lighter than ever before.

    The stock is adjustable for five lengths of pull and adjusts for elevation. In its lowest position the stock will allow for the use of iron sights or the stock can be raised up to 1.25? higher for use with mounted optics.

    This stock system features an improved magwell relief that allows for easier operation of any M14/M1A magazine.

    The buttstock is slightly wider and longer at the toe than a regular M4 stock with a noticeable negative pitch, making transitions from the ready position feel more natural.

    The M1-S Stock system comes included with: carbon fiber composite fore end, pistol grip assembly, buttstock adapter, and VLTOR EMOD buttstock.

    Note: The handguard shown is the VLTOR CASV-14 and is sold separately

    • Lightweight
    • Drop-in installation
    • Proprietary mold and carbon fiber composite specific to VLTOR
    • Stock adjusts for 1.25? in elevation
    • Comes in a choice of four colors: Black, FDE/Tan, Foliage Green, or Raw
    • Waterproof side battery compartments that holds (4) CR123 or (3) AA batteries in each compartment
    • Weatherproof compartment in the clubfoot area of the stock that hold two AA  batteries
    • Comes pre-assembled with carbon fiber composite forend, pistol grip, stock adapter and VLTOR EMOD buttstock
    • Buttstock is impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Has standard military and quick disconnect swivel socket accessible from both sides
    • Available in Semi-Auto (M1-SS) or Select Fire (M1-SF)
    Learn More
  9. MI-RDDMH : Factory Ruger PC9 M-Lok Handguard

    Features

    • Lightweight design with a slim profile
    • True Free Float Design
    • Mounting bolt and wrench included
    • 12.0" overall length
    • Three built in anti-rotation QD sockets
    • Features 8 sides of M-Lok slots
    • 5-slot polymer M-Lok rail included
    • Weight 10.9 oz installed
    • Construction from 6061 aluminum, Type 3 hard coat anodized for a lifetime of service
    • Fully dehorned for a non-abrasive, comfortable feel
    • MI Lifetime Warranty
    • 100% Made in America - Keeps America Working
    • US Patent Pending
    Learn More
  10. MI-RPCC : MI Chassis Compatible with Ruger® PC Carbine™, 6-Position Mil-Spec Tube

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Mil-Spec Diameter 6-Position Stock Tube – Waterproof Compartment
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 11oz Installed (Without customer supplied stock/grip)
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*

    Learn More
  11. MI-RPCCSF : MI Chassis Compatible with Ruger® PC Carbine™, Railed for Side Folder

    Midwest Industries Inc made chassis for the Ruger® PC Carbine™

    Only compatible with new Ruger® PC Carbine™ 9mm/40 cal Take Down Models

    Features

    • Easy Installation
    • Chassis is Designed to Retain the Factory Iron Sights
    • Constructed from 6061 Aluminum Hard Coat Anodized
    • Two Anti-Rotation QD Sling Sockets
    • Rail on Receiver for Clamp On Stock
    • Retains Factory Easy-Change Magazine Well
    • Weight 1lb 6oz Installed
    • All Tools and Mounting Hardware Included
    • MI Lifetime Warranty
    • 100% Made in the USA

    *Not compatible with AR grips that have beavertails*
    *Side folding stock/brace not included*

    Learn More
  12. QDM-14 : M14/M1A Mounting Bracket

    The QDM-14 gives the user the ability to have a bottom mounted Picatinny rail and a push button side sling mount without modifying the original GI fiberglass handguard assembly.

    Learn More
  13. VSS-11-T : Vltor SCAR Stock (Fits Semi-Auto and Select-fire models)

    This replacement module for the FN SCAR incorporates the same battle-proven enhancements from the VLTOR modstocks.

    The buttpad has been re-shaped to include a negative pitch for a more natural transition to the ready position.

    Storage space, QD sling swivel sockets, and a metal reinforcement plate have been added for greater usability and function. The VLTOR SCAR stock is a necessary upgrade to the OE SCAR buttstock.

    • Simple to install
    • Keeps the folding feature
    • Comes pre-assembled with buttpad and strike plate
    • Impact and temperature resistant polymer, specifically blended for VLTOR stocks
    • Matte (anti-reflection/anti-glare) finish
    • Two QD sling sockets
    • Fits both light and heavy models
    • Compatible with Semi-Auto or Select Fire
    • Rolled/ angled buttpad with a wide traction area
    • Storage space behind the buttpad give ample room for small parts
    • Weight: 7.75 oz
    Learn More
View as List Grid

15 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.