Firearms

View as List Grid

21 Items

per page
Set Descending Direction
In Stock
Shop By
  1. 90070 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch LoP, soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  2. 90080 : Urbino® Pistol Grip Stock Remington® 870™, 1100™, 11-87™ Riser, Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  3. 90210 : SureShell® Carrier for Remington 6 Shell 12Ga Left Side

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  4. 90320 : SureShell® Carrier for Remington 4-Shell 12Ga Left Side

    SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.

    Learn More
  5. 90420 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 8 Shell 12Ga Left side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  6. 90580 : SureShell® Aluminum Carrier for Remington® 870™/1100™/11-87™ (2-Shot 12Ga Left Side)

    Mesa Tactical Lightweight aluminum shotshell holder attaches to the left side of the shotgun receiver.

    Learn More
  7. 90860 : Trigger Pin Replacement Kit for Remington® 870/1100/1187

    The trigger pin replacement kits, also known as "anti-walk" pins, can be installed in Remington 870/1100/1187 shotguns to secure the trigger pins in place. These kits are incompatible with receiver mounted SureShell carriers or side Picatinny rails.

    Learn More
  8. 91260 : LEO® Telescoping Stock Kit for Remington 870™ 12Ga

    Adapts AR-15 style butt stocks and pistol grips for use with Remington 870 and Mossberg 500/590 shotguns to gives the shotguns similar handling characteristics to the AR-15.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  9. 91520 : Pocket Push Button Sling Mount for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  10. 91530 : Pocket Ambi Push Button Sling Mount for Urbino® Stock for Remington® 870™,1100™, 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  11. 91540 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Limbsaver 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  12. 91550 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Riser. Limbsaver. 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock for is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  13. 91570 : Pocket Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  14. 91600 : Pocket Ambi Sling Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  15. 91610 : Pocket Ambi Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  16. 91800 : Rear Hook Loop for Urbino® Stock for Remington® Semi-auto 1100™, 11-87™ 12Ga

    The Urbino Tactical stock features a Benelli-style rear sling plate for installation of two-point slings. The installation of this component is entirely optional. Unlike the Benelli version, the Mesa Tactical Urbino Tactical stock sling plate accepts US military standard 1¼ inch sling webbing.

    Learn More
  17. 93240 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 4 Shell 20Ga Left Side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  18. 93250 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 6 Shell 20Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  19. 93260 : SureShell® Carrier for Remington® 870™, 1100™, 11-87™ 8-Shell 20Ga - Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  20. 93330 : Receiver-back Ambi Hook Loop for Remington® Shotgun

    Our innovative Sling and Hook Loops provide a way to securely attach a tactical sling directly to the shotgun receiver. They are excellent solutions for single-point slings, or for the receiver end attachment of three-point slings. The can be employed as alternatives to Burnsed loops or other attachment methods that are incompatible with custom stocks. In addition to sling mounts replacing the rear trigger pin, we also offer a limited line of hook loops that mount behind the Remington 870 receiver, between the receiver and the factory stock. These were produced at the request of a large US Federal enforcement agency. Unlike similar designs, the Mesa Tactical hook loops are machined from 1018 carbon steel, then given a mil-spec manganese phosphate finish. Some fitting with a file may be required.

    Learn More
  21. 94740 : SureShell® Polymer Carrier for Remington® (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
View as List Grid

21 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2019 Gravel Agency Store. All Rights Reserved.