Bipod Accessories

View as List Grid

39 Items

per page
Set Descending Direction
In Stock
  1. 4232-BK : Keymod™ Bipod Mount

    The KeyModT Bipod Mount is contoured to fit Harris-style bipods.

    Learn More
  2. 4246 : ERGO M-LOK Bipod Mount - Black

    The M-LOK Bipod Mount is contoured to fit Harris-style bipods.

    Learn More
  3. 4290 : ERGO Xpress Nut Bipod Mount - Black

    ERGO XPRESS Nut Bipod Mount provides quick mounting of bipods to 1913 Picatinny rails with the use of a single nut.

    Note: Dual Use, compatible with rifles and shotguns.

    Learn More
  4. 98060 : MWS RAIL BIPOD ADAPTER W/ STUD
    Knight‵s Armament Company
    98060 : MWS RAIL BIPOD ADAPTER W/ STUD
    Bipod adaptor that fits any MIL-STD 1913 rail. Designed for installation on the lower rail. Includes QD stud PN: 97030. Model: 98060 Learn More
  5. DHBIPODKM : BIPOD MOUNT KEYMOD

    BIPOD Mount for all KEYMOD & MLOK Handguards
    Constructed from 7075 T6 Aluminum
    Type 3 mil-spec hard coat anodizing
    Use with Harris & Harris type clone BIPODS
    KEYMOD & MLOK options available
    Can be mounted from either direction
    Weights (with screws):  KEYMOD 16.5 grams/MLOK 21 grams
    American made with a lifetime warranty

    Learn More
  6. DHBIPODML : BIPOD MOUNT MLOK

    BIPOD Mount for all KEYMOD & MLOK Handguards
    Constructed from 7075 T6 Aluminum
    Type 3 mil-spec hard coat anodizing
    Use with Harris & Harris type clone BIPODS
    KEYMOD & MLOK options available
    Can be mounted from either direction
    Weights (with screws):  KEYMOD 16.5 grams/MLOK 21 grams
    American made with a lifetime warranty

    Learn More
  7. MAG609-BLK : M-LOK® Bipod Mount - Black

    The Magpul M-LOK Bipod Mount allows for the attachment of Harris®-style stud mounted bipods to M-LOK compatible hand guards and forends. The M-LOK Bipod Mount offers a low-profile, robust, and elegant mounting solution for the most common bipods on the market. By utilizing the direct-connect properties of the M-LOK system, the bipod sits closer to the mounting surface than other adapters while providing superior support to the bipod for strength and stability. The Bipod Mount is also compatible with other accessories that attach to traditional sling studs. Machined from milspec-anodized aluminum, the M-LOK Bipod Mount also features beveled ends and corners to reduce snagging and sharp edges. All hardware necessary for attachment directly to M-LOK Slots on either aluminum or polymer hand guards and forends is included. Max overall length of 2.33 in.

    Made in U.S.A.

    Learn More
  8. MI-MBP : M-Lok BiPod Adaptor
    Midwest Industries, Inc.
    MI-MBP : M-Lok BiPod Adaptor
    • Made to work with Harris type bipods
    • 6061 hardcoat body with a steel stud
    • Low Profile with a wide footprint to perfectly support the bipod
    • 100% made in USA
    • Lifetime Warranty
    Learn More
  9. NO. 14 : Adapter Mini 30 & 14

    Adapter for Ruger Mini 14/30
    Bipod Adapter - For Ruger Mini-14 and Mini-30
    standard and ranch rifles will not work on the target model

    Learn More
  10. NO. 2 : Adapter Flange Nut

    HB2 - Flange Nut -
    Allows mounting of stud on hollow fore-ends

    Learn More
  11. NO. 2A : Adapter Round Flange Nut

    HB2A - Round Head Flange Nut -

    Allows mounting of Plastic fore-ends

    Learn More
  12. NO. 2R : Adapter Radius Flange Nut

    HB2R Radius Flange Adapter

    Has radiused flange for mounting to wood or polymer fore-ends under gas tubes

    Learn More
  13. NO. 4 : Adapter Universal-Brl. Clamp

    HB4 Universal Adapter
    HB4 - Universal Adapter - Requires two inches of unclutered barrel for mounting Fit barrels from .550 diameter to .812

    Learn More
  14. NO. 5 : Adapter AR-15 Round H/G

    HB5 Adapter for AR-15 M16 Fits AR15 standard polymer handguards

    HB5 - Stud -
    Fits AR-15/M16 standard Polymer handguards without alteration
    Detachable Swivel Included

    Learn More
  15. NO. 6A : Adapter American Rail

    HB6A Adapter for American rails 5/16"
    Stud- For American Size Rails
    (5/16" across rail slot)

    Learn More
  16. NO. 7A : Adapter-Spacer Thin Forend

    HB7A Rubber Spacer
    Allows mounting of Bipods on thin fore-ends, reversible to change angle of Bipod

    Learn More
  17. NO. 8 : Stud Adapter XP-100 Plastic

    Ultra-light Harris Bipods are lightning quick and quality manufactured with heat treated steel and hard alloys. These adapters allow you to match any Harris Bipod to your favorite firearm. Some of these adapters will require minor stock or fore end inletting for proper fit. Adapter only, see below for fit/application. Bipods sold separately.

    For Remington XP-100 synthetic stock. Includes a 7A spacer. Requires drilling

    Learn More
  18. NO.6 : Adapter European Rail

    HB6 Adapter for European rails 3/8"

    HB6 - Stud -
    For European Size Rails (3/8" across rail slot)

    Learn More
  19. Snapfoot-AtlasKit : Quick Change Bipod Adapter and Feet to fit Atlas Bipods

    SnapFoot™ is the best accessory for your Bipod. It allows you to quickly exchange feet, without tools, to adapt to different shooting surfaces, environments, and competition situations. Whether it is the model for the Harris, Magpul, or Atlas bipods, after the Snapfoot™ adapter is installed, all of our feet will fit your bipod. You can quickly snap out one foot and snap in another style in seconds. Go from using the standard rubber feet to a spike for sand, wooden barricades, fence posts, window sills, trees, etc. Or, you could opt to use our posable feet that allow easy and stable manipulation of the weapon. All feet can be snapped in and out quickly & easily.

    You retain the ability to utilize your bipod’s original rubber feet when using our rubber foot transition adapters. Simply remove the OEM feet and swap them over to our inserts and you’re set to go!

    Included in the kit will be two Snapfoot™ main adapters, 2 rubber foot transitions, 2 posable feet, 2 Spikes with steel baskets, roll pins and extra O-rings.

    O-rings can be lubricated with Vaseline or grease.

    Learn More
  20. Snapfoot-HarrisKit : Quick Change Bipod Adapter and Feet to fit Harris type Bipods

    SnapFoot™ is the best accessory for your Bipod. It allows you to quickly exchange feet, without tools, to adapt to different shooting surfaces, environments, and competition situations. Whether it is the model for the Harris, Magpul, or Atlas bipods, after the Snapfoot™ adapter is installed, all of our feet will fit your bipod. You can quickly snap out one foot and snap in another style in seconds. Go from using the standard rubber feet to a spike for sand, wooden barricades, fence posts, window sills, trees, etc. Or, you could opt to use our posable feet that allow easy and stable manipulation of the weapon. All feet can be snapped in and out quickly & easily.

    You retain the ability to utilize your bipod’s original rubber feet when using our rubber foot transition adapters. Simply remove the OEM feet and swap them over to our inserts and you’re set to go!

    Included in the kit will be two Snapfoot™ main adapters, 2 rubber foot transitions, 2 posable feet, 2 Spikes with steel baskets, roll pins and extra O-rings.

    O-rings can be lubricated with Vaseline or grease.

    Learn More
  21. Snapfoot-MagpulKit : Quick Change Bipod Adapter and Feet to fit Magpul Bipods

    SnapFoot™ is the best accessory for your Bipod. It allows you to quickly exchange feet, without tools, to adapt to different shooting surfaces, environments, and competition situations. Whether it is the model for the Harris, Magpul, or Atlas bipods, after the Snapfoot™ adapter is installed, all of our feet will fit your bipod. You can quickly snap out one foot and snap in another style in seconds. Go from using the standard rubber feet to a spike for sand, wooden barricades, fence posts, window sills, trees, etc. Or, you could opt to use our posable feet that allow easy and stable manipulation of the weapon. All feet can be snapped in and out quickly & easily.

    You retain the ability to utilize your bipod’s original rubber feet when using our rubber foot transition adapters. Simply remove the OEM feet and swap them over to our inserts and you’re set to go!

    Included in the kit will be two Snapfoot™ main adapters, 2 rubber foot transitions, 2 posable feet, 2 Spikes with steel baskets, roll pins and extra O-rings.

    O-rings can be lubricated with Vaseline or grease.

    Learn More
View as List Grid

39 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2022 Gravel Agency Store. All Rights Reserved.