Pièces de culasses

Afficher en Liste Grille

Produits 1-50 sur 122

Page
par page
Par ordre décroissant
En stock
  1. 01-UP-556-CP : SMOOTHCAM DOMED CAM PIN 223/556

    The CP-R360™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 556 ONLY

    Made in the USA.

    En savoir plus
  2. 01-UP-556-FPIN : FIRING PIN 223/556

    High Quality Replecment .223/5.56 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    En savoir plus
  3. 01-UP-556-NIB-EXKIT : EXTRACTOR KIT 223/556 NIB

    Replacement .223/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA

    En savoir plus
  4. 01-UP-556-NIT-EXKIT : EXTRACTOR KIT 223/556 BLK NIT

    Replacement .223/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Black QPQ Finished.

    Made in the USA

    En savoir plus
  5. 01-UP-762-BOLTEJK : BOLT EJECTOR KIT 308/762

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Made in the USA.

    En savoir plus
  6. 01-UP-762-CPH : SMOOTHCAM DOMED CAM PIN 308/762 HEAVY

    The CP-R360-H™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 308/7.62 ONLY

    Made in the USA.

    En savoir plus
  7. 01-UP-762-FPIN : FIRING PIN 308/762

    High Quality Replecment .308/7.62 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    En savoir plus
  8. 01-UP-762-NIB-EXKIT : EXTRACTOR KIT 308/762 NIB

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA.

    En savoir plus
  9. 01-UP-762-NIT-EXKIT : EXTRACTOR KIT 308/762 BLK NIT

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Black QPQ Finished.

    Made in the USA.

    En savoir plus
Afficher en Liste Grille

Produits 1-50 sur 122

Page
par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2021 Boutique Agence Gravel Défense. All Rights Reserved.