Dispositifs pour bouche de canon

Afficher en Liste Grille

Produits 1-50 sur 613

Page
par page
Par ordre décroissant
En stock
  1. 01-GP-TP-BLK : TP-PRO THREAD PROTECTOR BLK

    Lantac TP-PRO, Thread Protector Pro

    Precision machined from 416R Stainless Steel with an agressive knurled pattern these thread protectors are cut with a 1/2-28 UNEF threads and chamfered both ends for easy start.

    Color options are:

    Black, DLC Diamond Like Carbon PVD Finish

    Each thread protector comes compltete with a high temp Viton 'O' ring for easy retention of the protector when mounted on the barrel.

    Manufactured in the USA.

    En savoir plus
  2. 01-GP-TP-SS : TP-PRO THREAD PROTECTOR SS

    Lantac TP-PRO, Thread Protector Pro

    Precision machined from 416R Stainless Steel with an agressive knurled pattern these thread protectors are cut with a 1/2-28 UNEF threads and chamfered both ends for easy start.

    Color options are:

    Silver, Bead Blasted Stainless Steel Finish

    Each thread protector comes compltete with a high temp Viton 'O' ring for easy retention of the protector when mounted on the barrel.

    Manufactured in the USA.

    En savoir plus
  3. 01-MD-A2-BMD-COLLAR : BMD® A2 Adapter Collar - 556, 9MM, MPX, AK

    Use extra collars to allow the use of one BMD® across multiple firearms.

    A2 Adapter Collars work ONLY with the following non pinned & welded LANTAC DragonT Muzzle Brakes:

    DGN556B (5.56/223)

    DGN9MMB (9mm 1/2x36)

    DGN9MMC (9mm MPX)

    DGN9MMD (9mm 1/2x28)

    DGNAK47B (AK47)

    Comes with appropriate crush washers.

    Collars are to be used in combination with the BMD®.

    Note: DOES NOT WORK with DGN556B-QM.

    Made in the USA

    En savoir plus
  4. 01-MD-A2-BMD-COMP : [LA00265]BMD 556 Blast Mitigation Device

    The BMDT is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique "through" ports that connect the muzzle brakes vertical vents to the outside atmosphere.

    This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.
    The device also features sets of "diffuser" grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.
    Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
    Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.

    The BMDT is mounted to the DGN556BT Muzzle Brake through the use of an adapter collar. The collar is designed to fit as wide a range of brake outside diameters as possible and can effectively be mounted within the following size range:
    .855"' to .872"' Diameter.

    It is recommended that you use a quality set of vernier and check the outside diameter of your muzzle device before ordering.
    Diameters outside the ranges listed may need additional gunsmith work to be fitted or may not be used with this product.
    Measurements should be taken from the circular section of the brake marked with the "LANTAC" logo.

    The BMDT mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount..

    The device ships with a vial of Rocksett that must be used to ensure all mounting set screws are retained in place when the adapter is mounted to the brake.

    En savoir plus
  5. 01-MD-A3-BMD-COLLAR : BDM® A3 Adapter Collar - 308

    Use extra collars to allow the use of one BMD® across multiple firearms.

    A3 Adapter Collars work ONLY with the following non pinned & welded LANTAC DragonT Muzzle Brakes:

    DGN762B (7.62/308)

    Comes with appropriate crush washer.

    Collars are to be used in combination with the BMD®.

    Made in the USA.

    En savoir plus
  6. 01-MD-A3-BMD-COMP : BMD® Blast Mitigation Device, Complete W/A3 Adapter Collar - 308

    The BMD®, Blast Mitigation Device is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation.

    The patent pending design features unique "through" ports that connect the muzzle brakes vertical vents to the outside atmosphere.

    This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.

    The device also features sets of "diffuser" grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.

    Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
    Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.

    The BMD® mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount.

    The BMD® is mounted to the Dragon Muzzle Brake through the use of the adapter collar.

    This device comes complete with the A3 mounting collar that is designed to function with ONLY the following non pinned & welded LANTAC DragonT Brakes: DGN762B (7.62/308)

    For Pinned & Welded DGN556B Brakes please see our A1 Adapter Collar product.

    For DGN556B, DGN9MMB, DGN9MMC, DGN9MMC & DGNAK47B Brakes please use our BMD® A2 Adapter Collar version.

    Made in USA

    En savoir plus
  7. 05000299 : Flash Hider, 7.62, Blackout NM 5/8x24, AAC

    The Noveske KX5 Flash Suppressor

    -You asked, we listened. New slim design allows installation under the Noveske Handguard-

    US PATENT #'s: 7,836,809 & 8,047,115

    Made in Grants Pass,Oregon USA

    Heat-Treated CM Construction

    Nitride Finish

    • 4.5 ounces
    • 1.2 inch Dia
    • 3.25 inch OAL

    The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

    This KX5 may be used on:

    5.56mm = 1/2x28

    300 BLK, 6.8 SPC, 7.62mm = 5/8x24

    The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

    En savoir plus
  8. 05000305 : Flash Hider, AAC8, Blackout, Thread 5/8x24, AAC

    The Noveske KX5 Flash Suppressor

    -You asked, we listened. New slim design allows installation under the Noveske Handguard-

    US PATENT #'s: 7,836,809 & 8,047,115

    Made in Grants Pass,Oregon USA

    Heat-Treated CM Construction

    Nitride Finish

    • 4.5 ounces
    • 1.2 inch Dia
    • 3.25 inch OAL

    The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

    This KX5 may be used on:

    5.56mm = 1/2x28

    300 BLK, 6.8 SPC, 7.62mm = 5/8x24

    The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

    En savoir plus
  9. 05000519 : Flash Suppressor, KX5-556, 1/2x28 Thread, 1/2 Crush Washer

    The Noveske KX5 Flash Suppressor

    -You asked, we listened. New slim design allows installation under the Noveske Handguard-

    US PATENT #'s: 7,836,809 & 8,047,115

    Made in Grants Pass,Oregon USA

    Heat-Treated CM Construction

    Nitride Finish

    • 4.5 ounces
    • 1.2 inch Dia
    • 3.25 inch OAL

    The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

    This KX5 may be used on:

    5.56mm = 1/2x28

    300 BLK, 6.8 SPC, 7.62mm = 5/8x24


    The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

    Beware of illegal and unsafe counterfeits.

    En savoir plus
  10. 05000520 : Flash Suppressor, KX5-762, 5/8x24 Thread, 5/8 Crush Washer

    The Noveske KX5 Flash Suppressor

    -You asked, we listened. New slim design allows installation under the Noveske Handguard-

    US PATENT #'s: 7,836,809 & 8,047,115

    Made in Grants Pass,Oregon USA

    Heat-Treated CM Construction

    Nitride Finish

    • 4.5 ounces
    • 1.2 inch Dia
    • 3.25 inch OAL

    The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

    This KX5 may be used on:

    5.56mm = 1/2x28

    300 BLK, 6.8 SPC, 7.62mm = 5/8x24

    The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

    Beware of illegal and unsafe counterfeits.

    En savoir plus
  11. 05001046 : FLASH HIDER, KX3M, 14X1LH, NO DETENT, CRUSH WASHER 14M-LH
    Noveske has been making superior quality products for a number of years, and the Noveske KX3M Flash Hider, 14x1LH is their very own approach to showing you exactly how much they care. En savoir plus
  12. 05001156 : FLASH HIDER, KX5-762,14X1LH, NO DETENT, CRUSH WASHER M14-LH
    Noveske has been developing top quality merchandise for a number of years, and the Noveske KX5-762 Flash Hider, 14x1LH is their very own means of revealing how much they care. At OpticsPlanet, we ensure that it is our responsibility to purchase the best product for your needs, and featuring the Noveske KX5-762 Flash Hider, 14x1LH is a thing that we're delighted to offer. En savoir plus
  13. 100660 : Thread Protector M13.5 x 1LH

    For use with any barrel threaded M13.5 x 1LH.

    For example:

    • Sig Sauer threaded 9mm (P226, P239, P229, & P250)
    • HK threaded 9mm (USP SD)
    • Smith & Wesson threaded 9mm (M&P Spec-Ops)
    En savoir plus
  14. 40,86 $

    Les étranglements originaux de Remington sont un système de tubes interchangeables qui vous permettent de changer facilement et rapidement l’étranglement de votre fusil de chasse pour qu’il s’adapte aux conditions spécifiques auxquelles vous faites face. Ajustés pour la performance pour tous les fusils de chasse Remington, autant dans des contextes de tir à la cible ou sur le terrain, pour des groupements plus petits.

    En savoir plus
  15. 25,53 $

    Performance tuned in field and target constrictions for optimal pattern performance, Remington ProBore choke tubes are an interchangeable system of flush mount and extended chokes, designed to work with the new Versa Max shotgun, as well as 1100 G3, 1100 Competition, 105 CTI, and Premier 12 Gauge over/under models that are equipped with interchangable choke tubes. 9 different constrictions allow for a quick and easy swap of your shotgun choke to match specific hunting conditions. Genuine Remington factory part.

    En savoir plus
  16. 28,08 $

    Performance tuned in field and target constrictions for optimal pattern performance, Remington ProBore choke tubes are an interchangeable system of flush mount and extended chokes, designed to work with the new Versa Max shotgun, as well as 1100 G3, 1100 Competition, 105 CTI, and Premier 12 Gauge over/under models that are equipped with interchangable choke tubes. 9 different constrictions allow for a quick and easy swap of your shotgun choke to match specific hunting conditions. Genuine Remington factory part.

    En savoir plus
  17. 50,74 $

    Ajustés pour la performance pour tous les fusils de chasse Remington, autant dans des contextes de tir à la cible ou sur le terrain, pour des groupements plus petits, les tubes étrangleurs ProBore de Remington sont un système de tubes interchangeables « flush » ou « extended », conçu pour travailler avec le nouveau fusil de chasse Versa Max ainsi qu’avec les modèles 1100 G3, 1100 Competition, 105 CTI, Premier calibre 12 superposés qui sont équipés avec des tubes interchangeables. 9 étranglements différents pour permettre un changement rapide et efficace dépendant de votre environnement de chasse. Pièce d’origine Remington authentique.

    En savoir plus
  18. 25877 : 7.62 M110 FLASH SUPPRESSOR KIT, 3/4"-24 TPI
    7.62 QDC Flash Suppressor. The KAC M110 Flash Hider is an effective, birdcage-style flash suppressor that is currently in use on the US Military's M110 SASS rifle system. Comes complete with a 4-piece shim kit.  En savoir plus
  19. 30130 : MUZZLE DEVICE SHIM SET, 7.62, 7-PIECE
    This 7-Piece Shim Set is for use in properly timing a flash hider or muzzle brake. Kit includes 7 shims, Rockset and instructions. En savoir plus
  20. 30168 : 5.56 QDC MAMS MUZZLE BRAKE KIT, 1/2"-28 TPI
    The KAC 5.56 MAMS (Multi-Axis Muzzle Stability) Brake has been engineered to increase controllability, to significantly reduce felt recoil, and to help mitigate a rifle's flash signature as compared to traditional muzzle brake designs. The MAMS is a neutral bias brake that combats both muzzle rise and drift upon firing. Depending on the gun's barrel length, it can reduce felt recoil in a 5.56x45mm gun by as much as 67 percent. The 5.56 MAMS is compatible with KAC's Quick Disconnect Coupling (QDC) 5.56mm sound suppressor line, and comes complete with a 7-piece shim kit and installation instructions. Specifications: Material: Steel Caliber: 5.56mm Thread Size: 1/2"x28 Suppressor Compatibility: KAC 5.56 QDC, 5.56 QDC/CQB. En savoir plus
  21. 30169 : 7.62 QDC MAMS MUZZLE BRAKE KIT, 3/4"-24 TPI
    The KAC 7.62 MAMS (Multi-Axis Muzzle Stability) Brake has been engineered to increase controllability, to significantly reduce felt recoil, and to help mitigate a rifle’s flash signature as compared to traditional muzzle brake designs. The MAMS is a neutral bias brake that combats both muzzle rise and drift upon firing. Depending on the gun’s barrel length, it can reduce felt recoil in a 7.62x51mm gun by as much as 52 percent. The 7.62 MAMS is compatible with KAC’s Quick Disconnect Coupling (QDC) 7.62mm sound suppressor line, and comes complete with a 7-piece shim kit and installation instructions. En savoir plus
  22. 30555 : 5.56 QDC 3-PRONG FLASH SUPPRESSOR KIT, 1/2"-28 TPI
    The KAC 7.62mm QDC Suppressor Compatible 3- Prong Flash Hider. Caliber Up to .30. En savoir plus
  23. 30598 : 7.62 QDC MAMS MUZZLE BRAKE KIT, 5/8"-24 TPI
    The KAC 7.62 MAMS (Multi-Axis Muzzle Stability) Brake has been engineered to increase controllability, to significantly reduce felt recoil, and to help mitigate a rifle’s flash signature as compared to traditional muzzle brake designs. The MAMS is a neutral bias brake that combats both muzzle rise and drift upon firing. Depending on the gun’s barrel length, it can reduce felt recoil in a 7.62x51mm gun by as much as 52 percent. The 7.62 MAMS is compatible with KAC’s Quick Disconnect Coupling (QDC) 7.62mm sound suppressor line, and comes complete with a 7-piece shim kit and installation instructions. En savoir plus
  24. 31194 : 7.62 QDC 3-PRONG FLASH SUPPRESSOR KIT, 3/4"-24 TPI
    The KAC 7.62mm QDC Suppressor Compatible 3- Prong Flash Hider. Caliber Up to .30. En savoir plus
  25. 32316 : 5.56 M4QD MAMS MUZZLE BRAKE KIT, 1/2"-28 TPI
    The KAC 5.56 MAMS (Multi-Axis Muzzle Stability) Brake has been engineered to increase controllability, to significantly reduce felt recoil, and to help mitigate a rifle's flash signature as compared to traditional muzzle brake designs. The MAMS is a neutral bias brake that combats both muzzle rise and drift upon firing. Depending on the gun's barrel length, it can reduce felt recoil in a 5.56x45mm gun by as much as 67 percent. The 5.56 M4QD NT-4 MAMS is compatible with KAC's QDSS-NT4 5.56mm sound suppressor, and comes complete with a 7-piece shim kit and installation instructions. En savoir plus
Afficher en Liste Grille

Produits 1-50 sur 613

Page
par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2021 Boutique Agence Gravel Défense. All Rights Reserved.