Handgun Parts

Afficher en Liste Grille

Produits 1-50 sur 75

Page
par page
Par ordre décroissant
En stock
  1. 01-GP-ESP-SS : ULTRASMOOTH GLOCK FIRING PIN SAFETY 17&19 SS

    Precision machined from 17-4PH Stainless Steel.

    Firing Pin Safety Plunger with an ultra smooth domed head, reduces friction and trigger pull weight.

    Comes complete with a reduced power spring for additional smoothness to trigger pull.

    Fits most 9MM, .40S&W, .357 Sig, 10mm & .45 GAP Glock Pistols.

    Manufactured in the USA.

    En savoir plus
  2. 01-GP-FPIN : GFP-E GLOCK FIRING PIN

    GFP-E™ Glock Firing Pin Enhanced.

    Precision machined 17-4PH Stainless Steel hardened to H900 condition with a natural heat treated copper color surface finish.

    Our firing pin has been lightened with a series of chamfer cuts that reduce weight and retain strength. Improved sear geometry yeilds a crisper and more consistent trigger pull.

    Works with G17 & G19 only.

    Manufactured in the USA.

    En savoir plus
  3. 01-GP-GR17-NIT : G17 GUIDE ROD BLK NITRIDE

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    En savoir plus
  4. 01-GP-GR17-SS : G17 GUIDE ROD SS

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    En savoir plus
  5. 01-GP-GR19-NIT : G19 GUIDE ROD BLK NITRIDE

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    En savoir plus
  6. 01-GP-GR19-SS : G19 GUIDE ROD SS

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    En savoir plus
  7. 01-GP-GRA-NIT : GEN 4 GUIDE ROD ADAPTER BLK NITRIDE

    LANTAC Glock Gen 4 Guide Rod Adapter GB-G4-S - Black nitride Finish, is machined from 17-4PH stainless steel. The adapter has an aggressive knurled pattern and a recessed spring capture area for easier assembly.

    LPrecision 17-4PH Stainless Steel Adapter Bushings with ultra smooth bore and crenulated crown, for reduced friction performance and aggressive styling.

    Black nitride finish.

    En savoir plus
  8. 01-GP-GRA-SS : GEN 4 GUIDE ROD ADAPTER SS

    LANTAC Glock Gen 4 Guide Rod Adapter GB-G4-S - Stainless Stell Finish, is machined from 17-4PH stainless steel. The adapter has an aggressive knurled pattern and a recessed spring capture area for easier assembly.

    LPrecision 17-4PH Stainless Steel Adapter Bushings with ultra smooth bore and crenulated crown, for reduced friction performance and aggressive styling.

    Stainless Steel finish.

    En savoir plus
  9. 01-GS-GEN13-G17 : RAZORBACK GEN 1-3 G17 SLIDE

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    En savoir plus
  10. 01-GS-GEN13-G17-LT : RAZORBACK GEN 1-3 G17 LIGHT SLIDE

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    En savoir plus
  11. 01-GS-GEN13-G19 : RAZORBACK GEN 1-3 G19 SLIDE

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    En savoir plus
  12. 01-GS-GEN13-G19-LT : RAZORBACK GEN 1-3 G19 LIGHT SLIDE

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    En savoir plus
  13. ACC-XGMR1-BLK : Extended Glock Magazine Release - New Frontier Style- Black

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better.

    En savoir plus
  14. ACC-XGMR1-BLU : Extended Glock Magazine Release - New Frontier Style- BLUE

    XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better.

    En savoir plus
  15. ACC-XGMR1-FDE : Extended Glock Magazine Release - New Frontier Style- FDE

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better.

    En savoir plus
  16. ACC-XGMR1-OR : Extended Glock Magazine Release  - New Frontier Style- ORANGE

    XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better.

    En savoir plus
  17. ACC-XGMR1-RED : Extended Glock Magazine Release - New Frontier Style- Red

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better.

    En savoir plus
  18. ACC-XGMR2-BLK : Extended Glock Magazine Release - QC 10 Style- Black

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better. Will not work with Large Frame Quarter Circle 10 Lowers.

    En savoir plus
  19. ACC-XGMR2-FDE : Extended Glock Magazine Release - QC 10 Style- FDE

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better. Will not work with Large Frame Quarter Circle 10 Lowers.

    En savoir plus
  20. ACC-XGMR2-RED : Extended Glock Magazine Release - QC 10 Style- Red

     XGMR from ODIN Works is the one accessory your AR glock pistol caliber carbine needs.  XGMR is a one piece replacement for your factory magazine release.  The extended paddle on the XGMR makes gun handling easier for shapes and sizes of hands. Machined from 6061 billet aluminum and designed to work with KNS pins and the BAD lever.  Your AR will handle easier and look better. Will not work with Large Frame Quarter Circle 10 Lowers.

    En savoir plus
Afficher en Liste Grille

Produits 1-50 sur 75

Page
par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2021 Boutique Agence Gravel Défense. All Rights Reserved.