Training System

Afficher en Liste Grille

Produits 1-50 sur 59

Page
par page
Par ordre décroissant
En stock
  1. MT-2001 : MagRail - Universal MagRail - Magazine Floor Plate Rail Adapter

    A Picatinny rail adapter that bonds to the bottom of your magazine floor plate so you can attach the MantisX to your firearm.

    En savoir plus
  2. MT-2002 : MagRail - Glock (double stack) 9mm/.40 - Magazine Floor Plate Rail Adapter

    Replaces the standard Glock double stack magazine floor plate (9mm and .40) with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail.

    Preferred if you don't have light-accommodating holster and want to train with holster draws.

    En savoir plus
  3. MT-2003 : MagRail - Glock 42 - Magazine Floor Plate Rail Adapter

    Replace the Glock 42 magazine base plate with a rail adapter so you can attach the MantisX to your G42. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  4. MT-2004 : MagRail - Glock 43 - Magazine Floor Plate Rail Adapter

    Replace the Glock 43 magazine base plate with a rail adapter so you can attach the MantisX to your G43. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  5. MT-2005 : MagRail - Ruger LCP - Magazine Floor Plate Rail Adapter

    Replace the Ruger LCP 380 magazine base plate with a rail adapter so you can attach the MantisX to your LCP 380. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  6. MT-2006 : MagRail - Ruger LC9 - Magazine Floor Plate Rail Adapter

    Replace the Ruger LC9 magazine base plate with a rail adapter so you can attach the MantisX to your LC9. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  7. MT-2007 : MagRail - Sig Sauer P938 - Magazine Floor Plate Rail Adapter

    Replace the Sig Sauer P938 magazine base plate with a rail adapter so you can attach the MantisX to your P938.  *NOTE: This is for the 7-round magazine with a finger rest. Not for use on the 6-round magazine.

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  8. MT-2008 : MagRail - Sig Sauer P226 - Magazine Floor Plate Rail Adapter

    Replace the Sig Sauer P226 magazine base plate with a rail adapter so you can attach the MantisX to your P226.

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    Two Variants: For older model P226 (has polymer baseplate) and newer model P226 (has steel baseplate).  See photos to match specific model P226.

    En savoir plus
  9. MT-2009 : MagRail - S&W Bodyguard - Magazine Floor Plate Rail Adapter

    Replace the Smith & Wesson Bodyguard .380 magazine base plate with a rail adapter so you can attach the MantisX to your Bodyguard .380. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  10. MT-2010 : MagRail - S&W M&P Shield 9mm - Magazine Floor Plate Rail Adapter

    Replacement magazine floor plate that adds a picatinny rail for accessory attachment.  Takes less than a minute to swap out, and allows you to use Mantis in a variety of training scenarios.

    Replace your existing base plate with this magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    Compatible with Shield and Shield 2.0 magazines.

    En savoir plus
  11. MT-2011 : MagRail - Springfield XD-9 - Magazine Floor Plate Rail Adapter

    Replace the Springfield XD-9 magazine base plate with a rail adapter so you can attach the MantisX to your XD-9. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    Fits XD and XD Mod2.

    En savoir plus
  12. MT-2012 : MagRail - Springfield XD-S - Magazine Floor Plate Rail Adapter

    Replace the Springfield XD-S magazine base plate with a rail adapter so you can attach the MantisX to your XD-S. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    Fits all XDS and XDE models.

    En savoir plus
  13. MT-2013 : MagRail - Springfield XDM - Magazine Floor Plate Rail Adapter

    Replacement magazine floor plate that adds a picatinny rail for accessory attachment to Springfield XDM models.  Takes less than a minute to swap out, and allows you to use Mantis in a variety of training scenarios.

    Note: There are two variations of the magazine base plate: one with a small "ramp" and one that is flat throughout.  Make sure you select the proper variant.

    Fits both 9mm and 40 caliber.

    En savoir plus
  14. MT-2014 : MagRail - 1911 Wilson Combat 9mm - Magazine Floor Plate Rail Adapter

    Replace the Wilson Combat 47D 1911 magazine base plate with a rail adapter so you can attach the MantisX to your 1911. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if you don't have a rail.

    En savoir plus
  15. MT-2015 : MagRail - 1911 Wilson Combat .45 - Magazine Floor Plate Rail Adapter

    Replace the Wilson Combat 47D 1911 magazine base plate with a rail adapter so you can attach the MantisX to your 1911. 

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if you don't have a rail.

    En savoir plus
  16. MT-2016 : MagRail - Competition Air Pistol

    This rail adapter is designed to be fastened onto the air cylinder of a competition air pistol using the provided elastic strap.

    En savoir plus
  17. MT-2017 : MagRail - Competition Air Rifle

    This rail adapter is designed to be fastened onto the air cylinder of a competition air rifle using the provided elastic strap.

    En savoir plus
  18. MT-2019 : MagRail - Walther PPS M2 9mm - Magazine Floor Plate Rail Adapter

    Replaces the standard (6-round) Walther PPS M2 9mm magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    En savoir plus
  19. MT-2020 : MagRail - Walther PPQ M2 9mm - Magazine Floor Plate Rail Adapter

    Replaces the standard Walther PPQ M2 9mm magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    En savoir plus
  20. MT-2021 : MagRail - Sig Sauer P320 - Magazine Floor Plate Rail Adapter

    Replaces the standard Sig Sauer P320 or P250 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    Please Note: This floor plate is not compatible with early grip modules of the P250 series.

    Two Variants: Round Base Hole, Square Base Hole.

    En savoir plus
  21. MT-2022 : MagRail - S&W M&P Shield 45 - Magazine Floor Plate Rail Adapter

    Replaces the standard S&W M&P Shield 45 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, of if you want to work with holster draws.

    En savoir plus
  22. MT-2023 : MagRail - Kahr K9 9mm - Magazine Floor Plate Rail Adapter

    Replaces the standard Kahr 9mm magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail.

    Compatible with models CM9, CW9, K9, MK9, P9, PM9

    En savoir plus
  23. MT-2024 : MagRail - Glock .45 ACP/10mm - Magazine Floor Plate Rail Adapter

    Replaces the standard Glock .45 ACP/10mm magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    En savoir plus
  24. MT-2026 : MagRail - Beretta M92FS / M9 - Magazine Floor Plate Rail Adapter

    Replaces the standard Beretta 92 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    En savoir plus
  25. MT-2027 : MagRail - Springfield XDM (no ramp) - Magazine Floor Plate Rail Adapter

    Replacement magazine floor plate that adds a picatinny rail for accessory attachment to Springfield XDM models.  Takes less than a minute to swap out, and allows you to use Mantis in a variety of training scenarios.

    Note: There are two variations of the magazine base plate: one with a small "ramp" and one that is flat throughout.  Make sure you select the proper variant.

    Fits both 9mm and 40 caliber.

    En savoir plus
  26. MT-2028 : MagRail - HK USP Compact - Magazine Floor Plate Rail Adapter

    Replaces the standard HK USP Compact magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    For 9mm and .40 caliber USP Compact.

    En savoir plus
  27. MT-2029 : MagRail - CZ 75 - Magazine Floor Plate Rail Adapter

    Replaces the standard CZ 75 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws. Note: This is for the restricted 10-round magazine only.

    En savoir plus
  28. MT-2030 : MagRail - S&W M&P Shield .40 - Magazine Floor Plate Rail Adapter

    Replaces the standard S&W M&P Shield 40 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, of if you want to work with holster draws.

    En savoir plus
  29. MT-2031 : MagRail - Sig Sauer P238 - Magazine Floor Plate Rail Adapter

    Replace the Sig Sauer P238 magazine base plate with a rail adapter so you can attach the MantisX to your P238.  This adapter replaces the magazine with the pinky extension.

    Preferred if you don't have light-accommodating holster and want to train with holster draws, or if the firearm doesn't have a rail.

    En savoir plus
  30. MT-2051 : MagRail - Sig Sauer P365 - Magazine Floor Plate Rail Adapter

    Replaces the standard Sig Sauer P365 magazine floor plate with a rail adapter so you can attach the MantisX to your firearm if it doesn't have an existing rail, or if you want to work with holster draws.

    Three variants: 10-round, 10-round with pinky extension, 12 round

    En savoir plus
  31. MT-3050 : TRT Tap Rack Dry Fire Safety Training Aid - .223/5.56 - Magazine Dummy Ammo (3-pack)
    • TRT loads into an empty pistol magazine. Perfect for use during dry fire training. Keeps the magazine follower positioned so that it will not engage the slide stop of the bolt.
    • Designed such that the bolt can pass over the TRT without stripping it from the magazine.
    • 3 Pack of .223 cal
    • USA MADE
    En savoir plus
  32. MT-3051 : TRT Tap Rack Dry Fire Safety Training Aid - 45 ACP - Pistol Magazine Dummy Ammo (3-pack)
    • TRT loads into an empty pistol magazine. Perfect for use during dry fire training. Keeps the magazine follower positioned so that it will not engage the slide stop of the pistol.
    • Designed such that the slide of the pistol can pass over the TRT without stripping it from the magazine.
    • 3 Pack of 45 ACP cal
    • USA MADE
    En savoir plus
  33. MT-3052 : TRT Tap Rack Dry Fire Safety Training Aid - 9MM/.40 - Pistol Magazine Dummy Ammo (3-pack)
    • TRT loads into an empty pistol magazine. Perfect for use during dry fire training. Keeps the magazine follower positioned so that it will not engage the slide stop of the pistol.
    • Designed such that the slide of the pistol can pass over the TRT without stripping it from the magazine.
      3 Pack of 9MM/.40 cal.
    • USA MADE
    En savoir plus
  34. MT-4001-9 : TRT insert 9mm (3-Pack)

    TRT loads into an empty pistol magazine. Perfect for use during dry fire training. Keeps the magazine follower positioned so that it will not engage the slide stop of the pistol.
    Designed such that the slide of the pistol can pass over the TRT without stripping it from the magazine.

    En savoir plus
  35. MT-MK-3004 : Elite Demo Kit (video retail display + tablet + CO2 gun)

    MT-MK-3004 Elite Demo Kit

    • 1 x Sig Sauer P226 Pellet Pistol (color may vary)
    • 1 x 7" Kindle Fire
    • 1 x Video Retail
    En savoir plus
  36. PR-1001 : Pink Rhino - Laser Training Cartridge - 9mm

    The Pink Rhino Laser Training Cartridge provides instant laser activation when the trigger is pulled. Train with your pistol using any visible laser target system or simulation.

    Works with any 9mm pistol. Requires three LR626 batteries (included).

    Not compatible with Hi Point pistols. Using this product with Hi Point pistols will result in damage to the sensor.

    En savoir plus
  37. PR-1010 : Pink Rhino - Dummy Rounds Snap Caps - 9mm - Orange
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  38. PR-1011 : Pink Rhino - Dummy Rounds Snap Caps - 9mm - Red
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  39. PR-1012 : Pink Rhino - Dummy Rounds Snap Caps - 40 S&W
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  40. PR-1013 : Pink Rhino - Dummy Rounds Snap Caps - 45 ACP
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  41. PR-1014 : Pink Rhino - Dummy Rounds Snap Caps - 223 Rem
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  42. PR-1016 : Pink Rhino - Dummy Rounds Snap Caps - 357
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  43. PR-1017 : Pink Rhino - Dummy Rounds Snap Caps - 380
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
  44. PR-1018 : Pink Rhino - Dummy Rounds Snap Caps - 12 Gauge
    • Completely inert and safe
    • Loads and ejects just like real ammo - without the noise
    • For training, storage, testing, practice
    • Precision CNC machined
    • Teaches safe gun handling
    • Thousands of dry fires without damage
    • Hard anodized aluminum construction
    En savoir plus
Afficher en Liste Grille

Produits 1-50 sur 59

Page
par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2020 Boutique Agence Gravel Défense. All Rights Reserved.