Advanced Armament Corp.

Advanced Armament Corp.
View as List Grid

Items 1-50 of 107

Page
per page
Set Descending Direction
In Stock
  1. 100660 : Thread Protector M13.5 x 1LH
    $34.21

    For use with any barrel threaded M13.5 x 1LH.

    For example:

    • Sig Sauer threaded 9mm (P226, P239, P229, & P250)
    • HK threaded 9mm (USP SD)
    • Smith & Wesson threaded 9mm (M&P Spec-Ops)
    Learn More
  2. 100909 : Blackout® Flash Hider 7.62mm 18T 1/2-28 TPI
    $150.30
    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmorT finish provide the highest level of durability. Military tested and selected.
    Learn More
  3. 64002 : [100042] Element™ Baffle Removal Tool
    $82.90

    The ElementT Baffle Removal Tool allows users to safely disassemble a dirty ELEMENT silencer and doubles the factory recommended 500 round cleaning interval. The Baffle Removal Tool features corrosion resistant SCARmorT finished alloy steel construction and is supplied with a piloted brass pusher tip to minimize contact wear on the baffles. The baffle removal tool can be used to disassemble any .22 rimfire silencer that has a removable front end cap and 1/2-28 TPI threads.

    Learn More
  4. 64032 : [101243] OEM END CAP SPANNER TOOL Pilot 2/Element™ & Element™ 2
    $27.65

    If you"ve got a take-apart Pilot 2 or Element 2, this is the tool you need to get inside. Made of hard anodized aluminum.

    • This tool works with the Pilot 2, Element, and Element 2.
    Learn More
  5. 64053 : [102055] Ti-RANT™ FRONT END CAP TOOL
    $34.57

    If you"ve got a take-apart Ti-RANT, this is the tool you need to get inside. Made of hard anodized aluminum with steel spanner pins.

    • This tool works with all models of year 2011+ Ti-RANTs: Ti-RANT 9, Ti-RANT 9S, Ti-RANT 45, Ti-RANT 45S.
    Learn More
  6. 64129 : [100113] CYCLOPS™ 80T Muzzle Brake .50BMG M24 x 1
    $560.16

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and proprietary to the Cyclops. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmorT coated for high surface hardness and durability.

    *This muzzle device is specifically designed for the CYCLOPS 50BMG silencer.

    Learn More
  7. 64130 : [100114] CYCLOPS™ 80T Muzzle Brake .50BMG 1-14
    $560.16

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and proprietary to the Cyclops. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmorT coated for high surface hardness and durability.

    *This muzzle device is specifically designed for the CYCLOPS 50BMG silencer.

    Learn More
  8. 64131 : [100115] CYCLOPS™ 80T Muzzle Brake .50BMG 7/8-14
    $560.16
    Reduce Recoil and Stay On Target.Highly-efficient muzzle brake design and proprietary to the Cyclops. Constructed with aerospace-grade heat-treated 17-4 stainless steel and SCARmorT coated for high surface hardness and durability. *This muzzle device is specifically designed for the CYCLOPS 50BMG silencer. Learn More
  9. 64132 : [100183] BLACKOUT™ 51T Muzzle Brake 5.56mm 1/2-28
    $210.58

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and compatible with AAC sound suppressors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  10. 64133 : [100184] MK13-SD 90T Muzzle Brake 7.62mm 5/8-24TPI
    $238.67

    Highly-efficient muzzle brake design and compatible with the AAC MK13-SD. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  11. 64136 : [100187] BLACKOUT™ 18T Muzzle Brake 7.62mm 5/8-24TPI
    $210.58

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and compatible with AAC sound suppressors.

    Constructed with aerospace-grade heat-treated 17-4PH stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  12. 64137 : [100188] BLACKOUT® Flash Hider 5.56mm 18T 1/2-28TPI
    $139.00

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmorT finish provide the highest level of durability. Military tested and selected.

    Learn More
  13. 64138 : [100189] BLACKOUT® 51T Flash Hider 5.56mm 1/2-28 MITER
    $175.49

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  14. 64139 : [100191] BLACKOUT® 51T Flash Hider SCAR-H 7.62MM 5/8-24 Large Socket
    $192.12

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  15. 64140 : [100200] BLACKOUT® Flash Hider 7.62mm 18T 5/8-24TPI
    $139.00

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard SCARmorT finish provide the highest level of durability. Military tested and selected.

    Learn More
  16. 64141 : [100206] BLACKOUT® 51T Flash Hider 5.56mm 1/2-28
    $139.00

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  17. 64142 : [100208] BLACKOUT® 51T Flash Hider 7.62mm 9/16-24
    $139.00

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  18. 64143 : [100209] BLACKOUT® 51T Flash Hider 7.62mm 5/8-24 Deep Socket
    $139.00

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  19. 64144 : [100212] BLACKOUT® 51T Flash Hider 5.56mm M15 x 1 G36C
    $139.00

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  20. 64146 : [100214] BLACKOUT® 51T Flash Hider7 .62mm .595"-32 M14/M1A
    $154.55

    Consistently rated as the best flash hider on the market today, the BLACKOUT® is available in a wide variety of thread pitches to fit most of today’s commercial and military rifles. Available in 5.56 MM and 7.62 MM.

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. There are two different options for 5/8-24, a deep and standard socket. Deep socket is for .75" barrels and smaller(profile behind the threads) and the standard socket fits all profiles.

    Learn More
  21. 64150 : [100292] SIG Mosquito™ Standard Adapter 1/2-28
    $55.26

    This adapter allows you to attach any silencer with 1/2-28 TPI to the SIg Mosquito pistol with factory threaded barrel.

    • Includes one 1/2-28 TPI thread protector.
    Learn More
  22. 64151 : [100321] WALTHER P22™ Standard Adapter 1/2-28
    $55.26

    This adapter allows you to attach any silencer with 1/2-28 TPI to the Walther P22 pistol.

    • Interfaces with both 3.4" and 5" barreled models.
    • Includes one 1/2-28 TPI thread protector.
    Learn More
  23. 64152 : [100441] SHIM KIT 5.56MM 1/2-28 .750" OD X .500" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    This set is for any 5.56 mm application with 1/2-28 threads. Can also be used to level really small tables, clean under your fingernails, or substitute for coins in really stupid vending machines. For other calibers, see below in the Other Products section.

    Learn More
  24. 64153 : [100448] SHIM KIT 7.62MM 5/8-24 .750" OD X .625" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    This set is for any 7.62 mm application with 5/8-24 threads. Can also be used as an incredibly lethal micro frisbee, or a blade for cutting pizza bagel bites. For other calibers, see below in the Other Products section.

    Learn More
  25. 64154 : [100456] SHIM KIT 300/.338 3/4-24 .825" OD X .750" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    This set is for .338 LM applications with Metric 18mm and also 3/4" threads. Can also be used as cheap replacements for lost wedding rings, or as a costume monacle for halloween. For other calibers, see below in the Other Products section.

    Learn More
  26. 64155 : [100463] SHIM KIT .50BMG 1.130" OD X 1.010" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    This set is for .50 BMG applications. Can also be used to cut pizza, as bracelets for the skinny ladies, or as ninja stars. For other calibers, see below in the Other Products section.

    Learn More
  27. 64158 : [101209] TITAN-QD 90T Muzzle Brake STR PORT 338LM M18 x 1.5
    $421.17

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design proprietary to the TiTan-QD silencer. Constructed of stainless steel alloy (17-4PH) and SCARmor coated for maximum durability.

    *This 90T mount is made specifically for the TiTan-QD.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  28. 64159 : [101273] 16" Remington 700® Model 7™ Barrel 300 BLK Medium Contour Threaded 5/8-24
    $547.53

    This is a 16" replacement barrel for your Remington 700™ or Model-7. Chambered for the 300 AAC BLACKOUT round (7.62x35), it comes in black nitride finish (including bore and chamber), 1:7" twist for super- or sub-sonic use. It comes ready for silencer use, threaded 5/8-24. Includes thread protector.

    **The light contour barrel is the only barrel currently available

    Gunsmith installation is recommended.

    Learn More
  29. 64161 : [101289] BLACKOUT® 18T Muzzle Brake 5.56mm 1/2-28TPI
    $210.58

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and compatible with AAC sound suppressors.

    Constructed with aerospace-grade heat-treated 17-4PH stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  30. 64164 : [101655] SHIM KIT BARRETT 98B .338 .625" OD X .500" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    Can also be used to cut pizza, as bracelets for the skinny ladies, or as ninja stars. For other calibers, see below in the Other Products section.


     

    Learn More
  31. 64165 : [101718] 9" 300 BLK AR Barrel W/Gas System
    $575.72

    This barrel assembly is all you need to convert your 5.56mm AR to 300 AAC BLACKOUT (7.62x35mm).

    The 4150 steel barrel features a black nitride finish (including bore and chamber), 1:7" twist for super or sub-sonic use. It comes ready for silencer use, threaded 5/8-24. Includes gas tube, steel low-profile press-fit set screw gas block (barrel has set-screw divots for gas block alignment).

    NFA-registered or Pistol lower required.

    Requires barrel nut, gunsmith installation is recommended.

    Learn More
  32. 64166 : [101719] 16" 300 BLK AR Barrel W/Gas System
    $575.72

    This barrel assembly is all you need to convert your 5.56mm AR to 300 AAC BLACKOUT (7.62x35mm).

    The 4150 steel barrel features a black nitride finish (including bore and chamber), 1:7" twist for super or sub-sonic use. It comes ready for silencer use, threaded 5/8-24. Includes gas tube, steel low-profile press-fit set screw gas block (barrel has set-screw divots for gas block alignment).

    Requires barrel nut, gunsmith installation is recommended.

    Learn More
  33. 64169 : [101858] MK13-SD 90T Muzzle Brake 7.62mm M18 x 1.5
    $238.67

    Highly-efficient muzzle brake design and compatible with the AAC MK13-SD. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  34. 64170 : [101897] Blackout® Flash Hider Mk-46 5.56mm 90T TAPER 9/16-24 LH
    $167.06

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected.

    THIS FLASH HIDER IS FOR THE MK-46 ONLY AND CANNOT BE USED WITH ANY OTHER 90T SILENCERS.

    Learn More
  35. 64171 : [101898] Blackout® Flash Hider FN240 7.62mm 90T TAPER .7812-24
    $167.06

    The BLACKOUT® flash suppressor is the most efficient design available. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected.

    THIS FLASH HIDER IS FOR THE FN240 ONLY AND CANNOT BE USED WITH ANY OTHER 90T SILENCERS.

    Learn More
  36. 64172 : [102059] BLACKOUT™ 51T Muzzle Brake KAC M110 7.62mm 3/4-24
    $210.58

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and compatible with AAC sound suppressors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  37. 64173 : [102112] SHIM KIT M110 3/4-24MM .700" OD X .500" ID
    $14.00

    This is the kit you need for timing the installation of your muzzle device. Don"t risk misalignment by using a crush washer.

    This set is for .50 BMG applications. Can also be used to cut pizza, as bracelets for the skinny ladies, or as ninja stars. For other calibers, see below in the Other Products section.

    Learn More
  38. 64176 : [102306] BLACKOUT® Flash Hider Non-Silencer Mount 7.62mm 5/8-24
    $82.83

    Own the world"s most effective flash hider. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. This is the non-mount version for use without a silencer, in 7.62mm threaded 5/8x24tpi.

    Learn More
  39. 64177 : [102311] BLACKOUT® Flash Hider Non-Silencer Mount 5.56mm 1/2-28
    $82.83

    Own the world"s most effective flash hider. The proprietary features eliminate muzzle flash, even on CQB-length barrels. The BLACKOUT® is inherently stronger and more impact resistant than four prong designs, while not being subject to the rapid erosion of closed-ended units. A high strength corrosion-resistant aerospace alloy, and ultra-hard Nitride finish provide the highest level of durability. Military tested and selected. This is the non-mount version for use without a silencer, in 5.56mm threaded 1/2x28tpi.

    Learn More
  40. 64178 : [102320] BLACKOUT™ 51T Muzzle Brake 7.62mm 5/8-24
    $210.58

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design and compatible with AAC sound suppressors. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  41. 64179 : [102830] 12.5" 300 BLK AR Barrel W/Gas System
    $575.72

    This barrel assembly is all you need to convert your 5.56mm AR to 300 AAC BLACKOUT (7.62x35mm).

    The 4150 steel barrel features a black nitride finish (including bore and chamber), 1:7" twist for super or sub-sonic use. It comes ready for silencer use, threaded 5/8-24. Includes gas tube, steel low-profile press-fit set screw gas block (barrel has set-screw divots for gas block alignment).

    Requires barrel nut, gunsmith installation recommended. NFA-registered or Pistol lower required.

    Learn More
  42. 64180 : [102928] PRODIGY™ End Cap Tools (Pack of 2)
    $27.65

    If you like to shoot a ton without cleaning, this tool is just what the doctor ordered! Tough hard coat anodized aluminum construction. Compatible with 2010 or later PRODIGYsT, Gen II and Gen III cores.

    • COMES IN A PACK OF 2
    Learn More
  43. 64181 : [103023] TITAN-QD 90T Muzzle Brake STR PORT 338LM 5/8-24
    $421.17


    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design proprietary to the TiTan-QD silencer. Constructed of stainless steel alloy (17-4PH) and SCARmor coated for maximum durability.

    *This 90T mount is made specifically for the TiTan-QD.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  44. 64182 : [103042] TITAN-QD 90T Muzzle Brake STR PORT 338LM 3/4-24
    $421.17

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design proprietary to the TiTan-QD silencer. Constructed of stainless steel alloy (17-4PH) and SCARmor coated for maximum durability.

    *This 90T mount is made specifically for the TiTan-QD.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  45. 64183 : [103046] TITAN-QD 90T Muzzle Brake STR PORT 338LM M18 X 1
    $421.17

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design proprietary to the TiTan-QD silencer. Constructed of stainless steel alloy (17-4PH) and SCARmor coated for maximum durability.

    *This 90T mount is made specifically for the TiTan-QD.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  46. 64184 : [103050] TITAN-QD 90T Muzzle Brake STR PORT 338LM 3/4-20 Barrett 98B
    $421.17

    Reduce Recoil and Stay On Target.

    Highly-efficient muzzle brake design proprietary to the TiTan-QD silencer. Constructed of stainless steel alloy (17-4PH) and SCARmor coated for maximum durability.

    *This 90T mount is made specifically for the TiTan-QD.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  47. 64185 : [103074] BLACKOUT™ Flash Hider Tool (Torque Wrench Adapter)
    $48.37

    The BLACKOUTT Flash Hider Installation Tool from Advanced Armament Corp. enables armorers to quickly and easily install and remove a three-prong BLACKOUTT flash hider.

    • The tool uses a 3/8 drive.
    Learn More
  48. 64187 : [103140] MK13-SD 90T Muzzle Brake 7.62mm M18 X 1 Sako
    $238.67

    Highly-efficient muzzle brake design and compatible with the AAC MK13-SD. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  49. 64188 : [103194] MK13-SD 90T Muzzle Brake 7.62mm 3/4-24
    $238.67

    Highly-efficient muzzle brake design and compatible with the AAC MK13-SD. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
  50. 64189 : [103195] MK13-SD 90T Muzzle Brake 7.62mm 3/4-24 KAC M110
    $238.67

    Highly-efficient muzzle brake design and compatible with the AAC MK13-SD. Constructed with aerospace-grade heat-treated 17-4 stainless steel and Nitride coated for high surface hardness and durability.

    *NOT FOR USE ON SCAR 17 OR RUGER GUNSITE SCOUT

    Learn More
View as List Grid

Items 1-50 of 107

Page
per page
Set Descending Direction
In Stock
© 2017 Gravel Agency Store. All Rights Reserved.