Noveske

These BUIS, (Back Up Iron Sights), are the standard sights on our complete rifles. The front sight has the same style profile as a M4 or M16. Available in Black.

Made by Troy Industries.

These BUIS, (Back Up Iron Sights), are the standard sights on our complete rifles. The front sight has the same style profile as a M4 or M16. Available in Black.

Made by Troy Industries.

These BUIS, (Back Up Iron Sights), are the standard sights on our complete rifles. The front sight has the same style profile as a M4 or M16. Available in Black.

Made by Troy Industries.

The Noveske KX5 Flash Suppressor

-You asked, we listened. New slim design allows installation under the Noveske Handguard-

US PATENT #'s: 7,836,809 & 8,047,115

Made in Grants Pass,Oregon USA

Heat-Treated CM Construction

Nitride Finish

• 4.5 ounces
• 1.2 inch Dia
• 3.25 inch OAL

The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

This KX5 may be used on:

5.56mm = 1/2x28

300 BLK, 6.8 SPC, 7.62mm = 5/8x24

The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

The Noveske KX5 Flash Suppressor

-You asked, we listened. New slim design allows installation under the Noveske Handguard-

US PATENT #'s: 7,836,809 & 8,047,115

Made in Grants Pass,Oregon USA

Heat-Treated CM Construction

Nitride Finish

• 4.5 ounces
• 1.2 inch Dia
• 3.25 inch OAL

The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

This KX5 may be used on:

5.56mm = 1/2x28

300 BLK, 6.8 SPC, 7.62mm = 5/8x24

The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

• 1/2 x 28 Thread Protector
• 5/8 x 24 Thread Protector

• 1/2 x 28 Thread Protector
• 5/8 x 24 Thread Protector

Mil Spec M-16/M4 A2 Flash Hider.

Comes with crush washer.

The Clamp-On Switchblock® is a complete assembly with gas tube for use on barrels that are .750" diameter at the front sight. Each Switchblock® model is designed for a specific caliber, barrel length, and gas system length.

The Switchblock® is machined from 17-4ph stainless with a durable matte black nitride finish. The unit is secured to the barrel by 2 allen head cap screws.

The Clamp-On Switchblock® is designed for installation by an experienced armorer or gunsmith. Supplied with gas tube, wrench, and instructions. The Switchblock® cannot be installed with standard plastic handguards and does not fit under a railed or tubular handguard.

Switchblock® is a registered trademark of Noveske Rifleworks LLC, and is patented, US patent number 7,856,917.

We recommend a pinned gas block for Military, Law Enforcement, and Self Defense use. Rifles, Uppers, and Barrels are available with a pinned Switchblock® for these applications.

To allow access to the Switchblock®, it cannot be covered up by a handguard. The longest handguard that can be used with a carbine gas system is 7" and a 9" for the mid-length, intermediate, and rifle length.

The Clamp-On Switchblock® is a complete assembly with gas tube for use on barrels that are .750" diameter at the front sight. Each Switchblock® model is designed for a specific caliber, barrel length, and gas system length.

The Switchblock® is machined from 17-4ph stainless with a durable matte black nitride finish. The unit is secured to the barrel by 2 allen head cap screws.

The Clamp-On Switchblock® is designed for installation by an experienced armorer or gunsmith. Supplied with gas tube, wrench, and instructions. The Switchblock® cannot be installed with standard plastic handguards and does not fit under a railed or tubular handguard.

Switchblock® is a registered trademark of Noveske Rifleworks LLC, and is patented, US patent number 7,856,917.

We recommend a pinned gas block for Military, Law Enforcement, and Self Defense use. Rifles, Uppers, and Barrels are available with a pinned Switchblock® for these applications.

To allow access to the Switchblock®, it cannot be covered up by a handguard. The longest handguard that can be used with a carbine gas system is 7" and a 9" for the mid-length, intermediate, and rifle length.

The Clamp-On Switchblock® is a complete assembly with gas tube for use on barrels that are .750" diameter at the front sight. Each Switchblock® model is designed for a specific caliber, barrel length, and gas system length.

The Switchblock® is machined from 17-4ph stainless with a durable matte black nitride finish. The unit is secured to the barrel by 2 allen head cap screws.

The Clamp-On Switchblock® is designed for installation by an experienced armorer or gunsmith. Supplied with gas tube, wrench, and instructions. The Switchblock® cannot be installed with standard plastic handguards and does not fit under a railed or tubular handguard.

Switchblock® is a registered trademark of Noveske Rifleworks LLC, and is patented, US patent number 7,856,917.

We recommend a pinned gas block for Military, Law Enforcement, and Self Defense use. Rifles, Uppers, and Barrels are available with a pinned Switchblock® for these applications.

To allow access to the Switchblock®, it cannot be covered up by a handguard. The longest handguard that can be used with a carbine gas system is 7" and a 9" for the mid-length, intermediate, and rifle length.

The Noveske KX5 Flash Suppressor

-You asked, we listened. New slim design allows installation under the Noveske Handguard-

US PATENT #'s: 7,836,809 & 8,047,115

Made in Grants Pass,Oregon USA

Heat-Treated CM Construction

Nitride Finish

• 4.5 ounces
• 1.2 inch Dia
• 3.25 inch OAL

The Noveske KX5 Flash Suppressor will work on any barrel length. All KX5s are individually serial numbered for quality control and come with a crush washer for timing purposes.

This KX5 may be used on:

5.56mm = 1/2x28

300 BLK, 6.8 SPC, 7.62mm = 5/8x24

The Noveske KX5 is classified as a flash suppressor by the BATF FTB.

Beware of illegal and unsafe counterfeits.