Odin Works

Bolt Carrier Group fits AR15/M4 compatible style Rifles (i.e.) .223/5.56mm, .300 Blackout.

1/2" drive 1 1/4" jumbo crowfoot wrench for your ODIN Works 223/5.56 Forend installation.
 
Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.
Not compatible with the ODIN Works 308 KMod Forend barrel nut.

 1/2" drive 1 3/8" jumbo crowfoot wrench for your ODIN Works 308 KMod Forend installation.

1/2" drive 1 3/16" jumbo crowfoot wrench for your ODIN Works Ragna Forend installation.
 
Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.
Not compatible with the ODIN Works 308 Forend barrel nut or the Standard and O2 Lite AR 15 barrel nut.

Protects your muzzle and threads when not using a muzzle device

This BCG from ODIN Works is a High Performance* part that will change the way your rifle feels and shoots. This BCG has been significantly lightened, weighing in at only 9 ounces, it dramatically changes the amount of mass reciprocating in your gun. This BCG also features a Salt Bath Nitride finish that is both slick and durable. The carrier is made from 8620 steel and the bolt from 9310 steel.

Bolt Carrier Group fits AR15/M4 compatible style Rifles (i.e.) .223/5.56mm, .300 Blackout.

*This is a HP or High Performance part. It will change how your rifle feels and shoots. Tuning may be required to make the gun properly run with this part. This can be done via the gas system or the buffer system.

The ODIN Works AR10 bolt carrier group is designed for multi caliber use.  Will work with .308, 6.5 CM, 6 CM, and any other caliber using that size of case head.  Smaller diameter firing pin and pin hole helps with high pressure cartridges.

Protects your muzzle and threads when not using a muzzle device.

6.5 Grendel Type 2 bolt face - Black Nitride Bolt Carrier Group.

The ODIN Works 9mm BCG is designed to work with both Colt and Glock style lowers and magazines. It also features the traditional style AR extractor that will give you long and reliable use.

ODIN Works Ambidextrous Modular Safety is designed to give you better control through a more ergonomic angle. Configurable up to 8 different orientations featuring the 90 and 45 degree selector barrel.

ODIN Works Ambidextrous Modular Safety is designed to give you better control through a more ergonomic angle. Configurable up to 8 different orientations featuring the 90 and 45 degree selector barrel.

ODIN Works Ambidextrous Modular Safety is designed to give you better control through a more ergonomic angle. Configurable up to 8 different orientations featuring the 90 and 45 degree selector barrel.

ODIN Works Ambidextrous Modular Safety is designed to give you better control through a more ergonomic angle. Configurable up to 8 different orientations featuring the 90 and 45 degree selector barrel.

ODIN Works Ambidextrous Modular Safety is designed to give you better control through a more ergonomic angle. Configurable up to 8 different orientations featuring the 90 and 45 degree selector barrel.

Our M-LOK B1 Handstop is designed to give you better control through a more ergonomic grip angle while not adding bulk to the front of your rifle or pistol.

Our M-LOK B1 Handstop is designed to give you better control through a more ergonomic grip angle while not adding bulk to the front of your rifle or pistol.

Our M-LOK B1 Handstop is designed to give you better control through a more ergonomic grip angle while not adding bulk to the front of your rifle or pistol.

 Our M-LOK B1 Handstop is designed to give you better control through a more ergonomic grip angle while not adding bulk to the front of your rifle or pistol.

Replace or upgrade your current AR10 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

Made from 7075 Billet Aluminum
Ergonomic design for easy gripping
Choose from black or red XCH Latch
For AR10

Replace or upgrade your current AR10 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

Made from 7075 Billet Aluminum
Ergonomic design for easy gripping
Choose from black or red XCH Latch
For AR10

Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

 Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

 Replace or upgrade your current AR15 charging handle in one easy step. The complete XCH makes charging your AR easier than ever. Large scopes or thick gloves can create a challenge when charging your rifle. Our extended latch, with its ergonomic design, allows for faster and smoother operation of the charging handle.

 The M-LOK accessory rail allows you to mount sights, lights, and other tactical accessories to your free float M-LOK forend.

Includes M-LOK nuts, screws, and hex wrench.
Weight: 1.4 oz (including M-LOK nuts and screws).
5" long.
12 slots.
Accessory Rail can be placed at 3,6, and 9 o"clock positions and can be joined to create continuous Pic Spec Rail.
Made from 6061-T6.

The M-LOK accessory rail allows you to mount sights, lights, and other tactical accessories to your M-LOK forend.

The M-LOK flashlight mount is designed to fit any 1" diameter flashlight. FLM is manufactured for dependability and flexibility.

Complete lower parts kit.

The M-Pod is the new mounting solution for Harris Style Bipods. M-Pod is used with the M-LOK modular mounting system.

 The M-Pod is the new mounting solution for Harris Style Bipods. M-Pod is used with the M-LOK modular mounting system.

ODIN Works MPX EXtended Magazine Release allows you to rapidly change mags without disrupting your shooting pattern.

Ambidextrous.
Easy to reach.
Ergonomic design.
Release magazine without changing grip or position.
Contoured for positive depression and reduced slip.
Matte BLACK
Weight: 0.15oz (including button, paddle, and screws).
All parts included.
Easy drop in installation.

ODIN Works MPX EXtended Magazine Release allows you to rapidly change mags without disrupting your shooting pattern.

Ambidextrous.
Easy to reach.
Ergonomic design.
Release magazine without changing grip or position.
Contoured for positive depression and reduced slip.
Matte Red
Weight: 0.15oz (including button, paddle, and screws).
All parts included.
Easy drop in installation.

The P-Pod is the new mounting solution for Harris Style Bipods. P-Pod fits Mil spec 1913 Picatinny rails.