Phase 5™

Phase 5™
View as List Grid

Items 1-50 of 192

Page
per page
Set Descending Direction
In Stock
  1. 12GSF-BLUE : LOW-DRAG HIGH VISIBILITY 12 GAUGE SHOTGUN FOLLOWER - Blue
    $31.99

    The Phase 5T Low Drag, High Visibility 12 Gauge Shotgun Follower (12GSF) is designed to feed smooth with no binding in most factory 12-gauge magazine and extension tubes. The 12GSF is precision machined from solid 7075-T6 aluminum bar-stock in U.S.A. and comes in both red and green anodizing with bright white lettering and a center hole to help verify that the magazine tube is clear by sight and touch.

    Learn More
  2. 12GSF-GREEN : Low Drag, High Visibility 12 Gauge Shotgun Follower
    $31.99

    The Phase 5T Low Drag, High Visibility 12 Gauge Shotgun Follower (12GSF) is designed to feed smooth with no binding in most factory 12-gauge magazine and extension tubes. The 12GSF is precision machined from solid 7075-T6 aluminum bar-stock in U.S.A. and comes in both red and green anodizing with bright white lettering and a center hole to help verify that the magazine tube is clear by sight and touch.

    • About one third the bearing surface of a stock follower for smooth feeding and no binding
    • Bright red or green anodized with white lettering for high visibility while clearing weapon
    • Center hole to help verify clear weapon by touch
    • About 80% stronger than 6061-T6 aluminum
    Learn More
  3. 12GSF-RED : Low Drag, High Visibility 12 Gauge Shotgun Follower
    $31.99

    The Phase 5T Low Drag, High Visibility 12 Gauge Shotgun Follower (12GSF) is designed to feed smooth with no binding in most factory 12-gauge magazine and extension tubes. The 12GSF is precision machined from solid 7075-T6 aluminum bar-stock in U.S.A. and comes in both red and green anodizing with bright white lettering and a center hole to help verify that the magazine tube is clear by sight and touch.

    • About one third the bearing surface of a stock follower for smooth feeding and no binding
    • Bright red or green anodized with white lettering for high visibility while clearing weapon
    • Center hole to help verify clear weapon by touch
    • About 80% stronger than 6061-T6 aluminum
    Learn More
  4. 4140-7.5 : BARREL 7.5" THREADED PISTOL 4140 5,56 mm
    $338.50

    Phase 5T introduces the AR type Pistol Barrel in 7.5". This precision air-gauged barrel is heat-treated fully then thermo stress-relieved for optimum durability and performance. We have assembled these barrels with precision ground Electroless Nickel (EN) coated extensions with Mil-Spec M4 feed ramps for best performance.

    Chambered for 5.56mm NATO round

    Learn More
  5. A2-FH : A2 Flash Hider
    Phase 5 Weapon Systems, Inc
    A2-FH : A2 Flash Hider
    $12.33

    Machined steel, five-port flash suppressor effectively controls muzzle flash to minimize shooter exposure in both daytime and low-light situations. Ports are located along the top of the suppressor and bottom is solid to reduce dust printing when shooting prone.

    Learn More
  6. A3-Upper : A3 Flat Top Complete Upper Receiver
    $190.55
    • Flat top upper receiver, complete.
    • Mil-spec type III hard coat anodizing
    • Precision machined to M16/M4 specs
    • M4 feedramps

    Includes: Forward assist assembly, ejection port cover assembly.

    Learn More
  7. ABL/CHA : Ambidextrous Battle Latch / Charging Handle Assembly
    $128.09

    Our AMBI Battle Latch/Charging Handle Assembly for 308 rifles features a truly ambidextrous design ideal for left-handed users, with broad contact points for a sure grip. The upgraded stainless coiled spring pin and increased slide thickness provide exceptional performance under repeated abuse and extreme situations.

    Pat No.: US D705, 383 S

    Learn More
  8. ABL/CHA-BLUE : Ambi-Battle Latch / Charging Handle Assembly - BLUE Anodizing
    $128.09

    Our Ambi Battle Latch/Charging Handle Assembly (ABL/CHAT) incorporates several structural and functional improvements, 7075 Aluminum, including a truly ambidextrous design ideal for left-handed users.

    The upgraded stainless coiled spring pin and increased sidewall thickness provide exceptional performance under repeated abuse and extreme situations.

    Overall Length: 7.5 inches
    Product Weight: 1.68oz
    Assembled Weight: 1.68oz

    Learn More
  9. ABL/CHA-GREY : Ambi-Battle Latch / Charging Handle Assembly - GREY Anodizing
    $128.09

    Our Ambi Battle Latch/Charging Handle Assembly (ABL/CHAT) incorporates several structural and functional improvements, 7075 Aluminum, including a truly ambidextrous design ideal for left-handed users.

    The upgraded stainless coiled spring pin and increased sidewall thickness provide exceptional performance under repeated abuse and extreme situations.

    Overall Length: 7.5 inches
    Weight: 48.7g

    Learn More
  10. ABL/CHA-RED : Ambi-Battle Latch / Charging Handle Assembly - RED Anodizing
    $128.09

    Our Ambi Battle Latch/Charging Handle Assembly (ABL/CHAT) incorporates several structural and functional improvements, 7075 Aluminum, including a truly ambidextrous design ideal for left-handed users.

    The upgraded stainless coiled spring pin and increased sidewall thickness provide exceptional performance under repeated abuse and extreme situations.

    Overall Length: 7.5 inches
    Weight: 48.7g

    Learn More
  11. ABL/CHA308 : AMBI-BATTLE LATCH/CHARGING HANDLE ASSEMBLY.308
    $128.09

    Our AMBI Battle Latch/Charging Handle Assembly for 308 rifles features a truly ambidextrous design ideal for left-handed users, with broad contact points for a sure grip. The upgraded stainless coiled spring pin and increased slide thickness provide exceptional performance under repeated abuse and extreme situations.

    Designed to be compatible with all .308 DPMS Gen 1 type platforms

    Pat No.: US D705, 383 S

    Learn More
  12. ABL/CHA716 : Ambi-Battle Latch / Charging Handle Assembly .308 CAL for SIG 716
    $128.09

    The 716-Ambidextrous Battle Latch Assembly is Phase 5's charging handle designed to answer many problems that operators face with other charging handles and latches.

    (ABL/CHA-716) incorporates several structural and functional improvements, including a truly ambidextrous design ideal for left-handed users. The upgraded stainless coiled spring pin and increased sidewall thickness provide exceptional performance under repeated abuse and extreme situations.

    Fits SIG716T

    Ambidextrous and one handed shooter operation.
    Built-in latch and handle contact stop point.
    Type III Mil-Spec Black hard anodized finish

    Learn More
  13. ABS : Arm Brace Stop
    Phase 5 Weapon Systems, Inc
    ABS : Arm Brace Stop
    $79.97

    Phase 5T Arm Brace Stop (ABS)T

    Compatible with the Sig Sauer® SB15 Pistol Stabilizing Brace

    The Phase 5T ABST (Arm Brace Stop) is a billet aluminum arm brace receiver that locates the Sig Sauer® SB15 Pistol Stabilizing Brace in most any desired location on a compatible pistol buffer tube.

    The ABST locates the Sig Sauer® pistol stabilizing brace and prevents unwanted rotation and movement when installed correctly.

    The ABST also includes a Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    Note: This product is not designed to be compatible with the Hex-2 buffer tubes.

    Learn More
  14. ABS-BLUE : Phase 5 Arm Brace Stop w/ QD sling attachment - BLUE ANODIZED Compatible w/ SB15 Brace
    $79.97

    Phase 5T Arm Brace Stop (ABS)T

    Compatible with the SBTACTICAL® SB15 Pistol Stabilizing Brace

    Compatible with the Sig Sauer® SB15 Pistol Stabilizing Brace

    Built in QD Sling attachment location

    Includes Allen Wrench and hardware

    Precision machined 6061 T6 USA made Billet aluminum

    Anodized finish: Blue

    Fits tube diameters from 1.22 - 1.25

    The Phase 5 ABST (Arm Brace Stop) is a billet aluminum arm brace receiver that locates the Sig Sauer® SB15 Pistol Stabilizing Brace in most any desired location on a compatible pistol buffer tube. The ABST locates the Sig Sauer® pistol stabilizing brace and prevents unwanted rotation and movement when installed correctly.

    The ABST also includes a Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    *This product is not designed to be compatible with the Hex-2 buffer tubes.

    Learn More
  15. ABS-GREY : Phase 5 Arm Brace Stop with built-in QD compatible w/ SB15 Pistol Brace - GREY ANODIZED
    $79.97

    Phase 5T Arm Brace Stop (ABS)T

    Compatible with the SBTACTICAL® SB15 Pistol Stabilizing Brace

    Compatible with the Sig Sauer® SB15 Pistol Stabilizing Brace

    Built in QD Sling attachment location

    Includes Allen Wrench and hardware

    Precision machined 6061 T6 USA made Billet aluminum

    Anodized finish: Grey

    Fits tube diameters from 1.22 - 1.25

    The Phase 5 ABST (Arm Brace Stop) is a billet aluminum arm brace receiver that locates the Sig Sauer® SB15 Pistol Stabilizing Brace in most any desired location on a compatible pistol buffer tube. The ABST locates the Sig Sauer® pistol stabilizing brace and prevents unwanted rotation and movement when installed correctly.

    The ABST also includes a Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    *This product is not designed to be compatible with the Hex-2 buffer tubes.

    Learn More
  16. ABS-RED : Phase 5 Arm Brace Stop w/ built-in QD compatible w/ SB15 Pistol Brace - RED ANODIZED
    $79.97

    Phase 5T Arm Brace Stop (ABS)T

    Compatible with the SBTACTICAL® SB15 Pistol Stabilizing Brace

    Compatible with the Sig Sauer® SB15 Pistol Stabilizing Brace

    Built in QD Sling attachment location

    Includes Allen Wrench and hardware

    Precision machined 6061 T6 USA made Billet aluminum

    Anodized finish: Red

    Fits tube diameters from 1.22 - 1.25

    The Phase 5 ABST (Arm Brace Stop) is a billet aluminum arm brace receiver that locates the Sig Sauer® SB15 Pistol Stabilizing Brace in most any desired location on a compatible pistol buffer tube. The ABST locates the Sig Sauer® pistol stabilizing brace and prevents unwanted rotation and movement when installed correctly.

    The ABST also includes a Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    *This product is not designed to be compatible with the Hex-2 buffer tubes.

    Learn More
  17. ABSM-BLK : Phase 5 Arm Brace Stop Compatible w/ SBM4, SOB, SBX-K, SBV Pistol Brace - BLACK ANODIZED
    $79.97

    The Phase 5 ABSM (Arm Brace Stop Multi-Fit) is a machined billet aluminum accessory for several of the SB Tactical Pistol Stabilizing Braces. The ABSM allows a stabilizing brace to be installed at a comfortable length while minimizing rotation and preventing forward movement of the brace.

    The ABSM also includes a Built in QD connect feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    Dual function: Built-in QD Attachment and Pistol Stabilizing Brace Receiver Stop.

    One side of the ABST is equipped with a QD sling attachment, the opposite side is a receiver for the Pistol Stabilizing Brace which prevents unwanted rotation and movement when installed correctly.

    The ABST installed on the Pistol Buffer Tube (PBT)T Brace securely positioned at desired location.

    Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system

    Learn More
  18. ABSM-BLUE : Phase 5 Arm Brace Stop Multi-Fit Compatible (SBM4, SOB, SBX-K, SBV Braces) BLUE ANODIZE
    $79.97

    The Phase 5 ABSM (Arm Brace Stop Multi-Fit) is a machined billet aluminum accessory for several of the SB Tactical Pistol Stabilizing Braces. The ABSM allows a stabilizing brace to be installed at a comfortable length while minimizing rotation and preventing forward movement of the brace.

    The ABSM also includes a Built in QD connect feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    Compatible with SB Tactical Braces:

    SBM4
    SOB
    SBX-K
    SBV

    Built in QD Sling attachment location.

    Precision machined 6061 T6 USA made Billet aluminum.

    Anodized finish - Blue

    Fits tube diameters from 1.22 - 1.25 inches.

    Weight: 1.1oz

    Includes:

    (1) Arms Brace Stop
    (1) Allen Wrench and hardware

    Learn More
  19. ABSM-GREY : Phase 5 Arm Brace Stop Compatible w/ SBM4, SOB, SBX-K, SBV Pistol Brace - GREY ANODIZED
    $79.97

    The Phase 5 ABSM (Arm Brace Stop Multi-Fit) is a machined billet aluminum accessory for several of the SB Tactical Pistol Stabilizing Braces. The ABSM allows a stabilizing brace to be installed at a comfortable length while minimizing rotation and preventing forward movement of the brace.

    The ABSM also includes a Built in QD connect feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    Dual function: Built-in QD Attachment and Pistol Stabilizing Brace Receiver Stop.

    One side of the ABST is equipped with a QD sling attachment, the opposite side is a receiver for the Pistol Stabilizing Brace which prevents unwanted rotation and movement when installed correctly.

    The ABST installed on the Pistol Buffer Tube (PBT)T Brace securely positioned at desired location.

    Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system

    Learn More
  20. ABSM-RED : Phase 5 Arm Brace Stop Compatible w/ SBM4, SOB, SBX-K, SBV Pistol Brace - RED ANODIZED
    $79.97

    The Phase 5 ABSM (Arm Brace Stop Multi-Fit) is a machined billet aluminum accessory for several of the SB Tactical Pistol Stabilizing Braces. The ABSM allows a stabilizing brace to be installed at a comfortable length while minimizing rotation and preventing forward movement of the brace.

    The ABSM also includes a Built in QD connect feature that allows the pistol to be used in conjunction with a quick detach weapon sling system.

    Dual function: Built-in QD Attachment and Pistol Stabilizing Brace Receiver Stop.

    One side of the ABST is equipped with a QD sling attachment, the opposite side is a receiver for the Pistol Stabilizing Brace which prevents unwanted rotation and movement when installed correctly.

    The ABST installed on the Pistol Buffer Tube (PBT)T Brace securely positioned at desired location.

    Built in QD feature that allows the pistol to be used in conjunction with a quick detach weapon sling system

    Learn More
  21. ACHL : Ambidextrous Charging Handle Latch
    $32.01

    The Phase 5™ Tactical™ ACHL gives the operator the ability to utilize the charging handle in a more effective manner. Under stress the ACHL’s positive forward swept contact point provides a sure engagement of the latch. If the need arises the operator can make the tactical choice and confidently use the charging handle with the right hand as well.

    Learn More
  22. BARREL 41V50-7.5BLK : 7 1/2" Barrel - 41v50 1:7twist 5.56cal Manganese Phosphate M4 Barrel Extension
    $200.02

    Phase 5's most popular AR type pistol barrel is a 1:7 twist, air gauged, button rifled barrel chambered for 5.56 NATO ammunition. This barrel is combined with an M4 barrel extension with M4 feed ramps. It has been heat treated and stress relieved for excellent durability. Made of a 41v50 chromoly alloy steel, this barrel has excellent wear resistance, which makes it perfect for any build. Coating is a complete satin black manganese phosphate finish.

    Learn More
  23. BARREL 41V50-7.5EN : 7 1/2" Barrel - 41v50 1:7twist 5.56cal Electroless Nickel M4 Barrel Extension
    $216.05

    Phase 5T introduces the AR type Pistol Barrel in 7.5". This precision air-gauged barrel is heat-treated fully then thermo stress-relieved for optimum durability and performance. We have assembled these barrels with precision ground Electroless Nickel (EN) coated extensions with Mil-Spec M4 feed ramps for best performance.

    Chambered for 5.56mm NATO round
    Threading: Mil-Spec ½ x 28

    1:7 Twist

    Learn More
  24. BCG-AR15 : AR15 Bolt Carrier Group Complete Chrome Lined Black Phosphate
    $188.42

    Phase 5's Mil-spec AR-15 bolt carrier features a heat treated and chrome lined inner with a black phosphate coating. The complete bolt carrier group includes cam pin, firing pin, gas key, and bolt with power extractor spring. All bolts are HPT/MPI tested.

    ***There has been a lot of talk about the pros and cons of staking the gas key on the carrier. Here is our opinion and why we do not stake keys. The US Mil Spec. assembly drawing requires the carrier key to be staked. Contrary to some popular opinions staking does not "SEAL" the gas key. Staking keeps the screws from backing out Period.

    If you do not properly torque the screws to 56 inch pounds you will be staking a screw that is loose or one that is over torqued and prone to breakage. We have seen plenty of staked screws that are loose or broken.

    The Mil Spec. also calls for the gas key bottom surface to be "SEALED" with Permatex gasket sealer. Something no one does to our knowledge. Here is our procedure for installing a gas key. First clean the oil from the gas key and the mating surface on the carrier. Then clean the oil from the screw threads. We use Acetone for this. Next use a very light coating of Permatex high strength thread locker gel on the bottom of the key. PN 27010. This is much easier to use than the Permatex gasket sealer. It comes in a plastic twist dispenser. Make sure you don"t use so much that it squishes into the gas port hole. The cure rate is 60 minutes. Next coat the screw threads with the same gel. Install the key and torque the screws to 56 inch pounds.

    Should you decide to remove the key for some reason don"t use the old screws when you put the key back on! You will most likely break them during installation or when you fire the rifle. Go to the local hardware store and buy new 10-32 x ¼" SHCS. If you feel the need to stake the screws spend the money and get one of the staking tools from Brownell that uses a screw type system to swedge the material into the top of the screw. Don"t use a hammer and a punch! You can stretch the thread on the screw and now you have a loose screw that will eventually break if the gun even fires.***

    Learn More
  25. BCG-AR15 NiBX : Bolt Carrier Group, AR15 Nickel Boron Coating
    $236.46

    Phase 5 Nickel Boron AR-15 Bolt Carrier Group.

    The Nickel Boron coated Bolt Carrier Group enhances reliability, lessens cleaning time, improves corrosion resistance and minimizes required bolt lubrication. - Nickel Boron coated bolt carrier, heat treated & hardened. - Hardened gas key, grade 8 hardened fasteners. Cleaning is minimal, usually requiring only a soft cloth. Permits firing for longer periods of time between cleaning, as dirt and powder residue has no wet or oily surface to cling to.

    Nickel Boron provides a high lubricity and low friction co-efficient, greatly increasing the life expectancy of a firearm due to reduced friction wear. EXO Technology creates a competitive advantage for all kinds of components, because treated parts run dramatically longer and more accurately with less maintenance. Further, EXO greatly enhances heat dissipation, so treated products run far cooler than non-treated parts.

    The EXO process is permanent, lasting for the entire lifespan of treated parts. A patented, nodular nickel-boron (NiB) surface treatment, EXO nucleates on the surface atoms of metals, becoming part of the metal rather than merely applied to the outside. In addition, the treated surface becomes harder than the substrate itself, eliminating the cost, weight and degradation problems of conventional hardened metals.

    Learn More
  26. BCG-M16 : M16 / M4 Chrome Lined Black Phosphate Complete Bolt Carrier Group
    $188.42

    Mil-Spec M16/M4 Heat treated and chrome lined carrier.

    Assembled complete with cam pin, firing pin, bolt and gas key.

    HPT/MPI tested Bolt.

    Drop-in BCG, ready to shoot.

    Finish: Standard black phosphate coating.

    ***There has been a lot of talk about the pros and cons of staking the gas key on the carrier. Here is our opinion and why we do not stake keys. The US Mil Spec. assembly drawing requires the carrier key to be staked. Contrary to some popular opinions staking does not "SEAL" the gas key. Staking keeps the screws from backing out Period.

    If you do not properly torque the screws to 56 inch pounds you will be staking a screw that is loose or one that is over torqued and prone to breakage. We have seen plenty of staked screws that are loose or broken.

    The Mil Spec. also calls for the gas key bottom surface to be "SEALED" with Permatex gasket sealer. Something no one does to our knowledge. Here is our procedure for installing a gas key. First clean the oil from the gas key and the mating surface on the carrier. Then clean the oil from the screw threads. We use Acetone for this. Next use a very light coating of Permatex high strength thread locker gel on the bottom of the key. PN 27010. This is much easier to use than the Permatex gasket sealer. It comes in a plastic twist dispenser. Make sure you don"t use so much that it squishes into the gas port hole. The cure rate is 60 minutes. Next coat the screw threads with the same gel. Install the key and torque the screws to 56 inch pounds.

    Should you decide to remove the key for some reason don"t use the old screws when you put the key back on! You will most likely break them during installation or when you fire the rifle. Go to the local hardware store and buy new 10-32 x ¼ "SHCS. If you feel the need to stake the screws spend the money and get one of the staking tools from Brownell that uses a screw type system to swedge the material into the top of the screw. Don"t use a hammer and a punch! You can stretch the thread on the screw and now you have a loose screw that will eventually break if the gun even fires.***

    Learn More
  27. BL/CHA : Battle Latch Charging Handle Assembly
    $120.07

    Our Battle Latch/Charging Handle Assembly incorporates an upgraded .1875mm stainless coiled spring pin and increased sidewall thickness to provide exceptional performance under repeated abuse. Broad contact points assure a reliable grip no matter the situation.

    Pat No.: US D705, 383 S

    Learn More
  28. BLE : Battle Latch Extension with 1/16 Hole Upgrade to Stock Charging Handle
    $64.04

    The Phase 5™ BLE is an upgrade that allows for quick and easy operation of the charging handle. Designed with full broad contact points for both traditional and tactical weapon manipulation, the BLE is great for scope-mounted flat-top receivers and allows expedited reloads along with immediate rifle actions.

    The BLE works with all AR15/M16 and AR10 308 standard charging handles.

    Learn More
  29. BUILDERS BIN LPK : Builders Bin Lower Parts Kit AR15
    $105.92

    This low cost Lower Parts Kit excludes the most commonly upgraded items. All parts are made to standard military specs.

        Bolt Catch
        Bolt Catch Plunger
        Bolt Catch Spring
        Buffer Retainer
        Buffer Retainer Spring
        Magazine Catch
        Magazine Catch Button
        Magazine Catch Spring
        Pistol Grip Lock Washer
        Pistol Grip Screw
        Pivot Pin
        Pivot Pin Detent
        Pivot Pin Detent Spring
        Selector
        Selector Detent
        Selector Detent Spring
        Takedown Pin
        Takedown Pin Detent
        Takedown Pin Detent Spring

    Does not include: Trigger assembly, trigger guard and pistol grip.

    Learn More
  30. CMSA : Carbine Mini Stock Assembly - UMS and HexOne Stock Kit
    $192.11

    Carbine Mini Stock Assembly (CMSA)

    The Phase 5T Carbine Mini Stock Assembly (CMSA) is a combo kit featuring our Universal Mini Stock (UMS) mounted on our HexOne buffer tube for an excellent compact fixed stock solution. The UMS is also compatible with a number of other buffer tubes, including Mil-spec carbine receiver extensions and most round tubes, it was designed to complement the sturdy HexOne buffer tube.

    The UMS and HexOne are precision machined in house from USA sourced raw billet aluminum. The HexOne buffer tube is cut from 7075-T7 and the UMS is 6061-T6. The HexOne buffer tube features a hexagonal design that is much thicker and rugged than a mil-spec receiver extension tube making it perfect for 5.56 NATO, 300 BLK, or even calibers like 7.62x39 and .308 (If you use this on a .308 weapon, you will need a .308 carbine buffer and .308 carbine spring). It will also work with pistol caliber carbines such as 9mm, 40 S&W, and 45 ACP, but you may need a different buffer and/or spring.

    The HexOne and UMS undergo a rugged tumbling process that further strengthens the exterior of the parts while leaving the surfaces smooth and snag free.

    Overall Length: 7.75 Inches
    Weight: 655g

    Learn More
  31. CQC COMPLETE UPPER : CQC Pistol Complete Upper Receiver Assembly
    $1,475.93

    Individually assembled, head spaced, fitted, inspected, and tested, these complete upper assemblies offer the builder a factory-backed, full warranty covered unit you can trust. The assembly includes the Phase 5 LPSN™ quad rail, chrome lined BCG, lo-pro gas block, gas tube, flash hider, BL/ CHA™, forward assist, and dust cover.

    This is a ready to use solution.

    Learn More
  32. EBRV1 : Extended Bolt Release V1
    Phase 5 Weapon Systems, Inc
    EBRV1 : Extended Bolt Release V1
    $40.05

    When mounted to your existing bolt catch, the Phase 5™ Extended Bolt Release v1 (EBRV1) helps clear jams and double feeds efficiently during magazine reloads while allowing faster operation. The release feature allows the shooter to swipe the toggle in the downward motion with the trigger finger to release the bolt and chamber the next round, greatly decreasing reload time.

    Learn More
  33. EBRV2308 : Extended Bolt Release V2-308 DPMS
    $86.45

    The Phase 5™ (EBRv2/308)™ gives the operator the ability to reload quicker, clear jams in a more efficient way and eliminate unnecessary hand movements during various operations.

    Monolithic tri-steeltechnology gives the (EBRv2/308)™ the ability to be lightweight and super strong. This EBRv2/308 was made for the DPMS™ type 308 rifles. This unit has gone through a stringent 9 stage manufacturing process; creating the product that is depended on and trusted by tactical trainers and law enforcement officers nationwide.

    (EBRv2/308)™ has no obstructing backing plates or screws that fail, come loose or get in the way of some weapon systems.

    COMPATIBLE WITH .308 DPMS™ TYPE PLATFORMS

    CONTENTS: (1) EBRv2/308 Lever

    Pat No.: US D621, 467 S

    Learn More
  34. EBRv3 : Extended Bolt Release v3
    Phase 5 Weapon Systems, Inc
    EBRv3 : Extended Bolt Release v3
    $80.05

    The Phase 5T Extended Bolt Release V3 was built on the legacy of the patented monolithic EBRv2 and EBRv2-SC levers, with several design upgrades.

    The Extended Bolt Release Version 3 was designed to be compatible with all mil spec AR-15/M16 receiver sets as well as many billet, side charging, and even left-handed weapons.

    The EBRv3 gives the operator the ability to reload quicker, clear jams more efficiently, and eliminates unnecessary hand movements during some operations by extending the lever into the trigger well for access on the right side of the weapon.

    Like it's predecessors, this is a one-piece replacement part for the mil spec bolt catch found in all AR-15/M16 lower parts kits and is a great upgrade for both right and left-handed shooters. The Phase 5 Extended Bolt Releases are depended on and trusted by tactical trainers and LE officers worldwide.

    Benefits:

    Heat treated, 8620 high strength carbon steel, same as a mil spec bolt catch.
    Secure patented monolithic design, direct replacement component, no screws to come loose.
    Low profile bolt catch, fits many aftermarket billet upper receivers and most side charging upper receivers.
    Grip serrations added to elbow and end of Extended Bolt Release lever.
    Improved magazine follower catch.
    Larger index finger tab for bolt release

    Learn More
  35. EPC-STAND : AR15 Ejection Port Cover Stand & Fight
    $24.01

    Laser engraved AR-15 ejection port cover/ dust cover.

    Engraved.. " STAND & FIGHT"

    Standard MIL-Spec plate, with a black parkerized finish.

    Includes dust cover only, no hardware.

    Learn More
  36. EPC-SURPRISE : AR15 Ejection Port Cover Engraved "Surprise Asshole!!"
    $24.01

    Laser engraved AR-15 ejection port cover/ dust cover.

    Engraved "Surprise Asshole!!"

    Standard MIL-Spec plate, with a black parkerized finish.

    Includes dust cover only, no hardware.

    Learn More
  37. EPES-3PK : Extra Power Extractor Spring AR15/M16 Pack of 3
    $12.33

    A much stronger spring which prevents "extractor bounce" during semi-auto or full auto fire, while also providing a reliable extraction and ejection from dirty chambers.

    • Higher resistance to heat, cycling and stress.
    • Manufactured to exact specifications.
    • Includes three(3) springs.
    Learn More
  38. EPES-SNGL : Extra Power Extractor Spring AR15/M16 Single Units
    $4.93

    A much stronger spring which prevents "extractor bounce" during semi-auto or full auto fire, while also providing a reliable extraction and ejection from dirty chambers.

    • Higher resistance to heat, cycling and stress.
    • Manufactured to exact specifications.
    • Includes one(1) spring.
    Learn More
  39. FATman-5/8-24 : FATman Hex Brake for 7.62x51/.308/300BLK
    $184.13

    The FATman Hex Brake was created to solve issues faced by many competition shooters and precision rifle builders.

    The 2 large (FAT) ventilated baffle sections and chambers create the compensation needed to reduce the overall recoil felt by the shooter.

    The FATman Hex Brake includes two top ports machined at a 20 Deg. forward directed angle. These top ports help direct the energy of the spent gas in a manner that maintains a flat consecutive result shot after shot.

    The design of the FATman Hex Brake allows the first chamber wall to sit as close to the barrel crown plane as possible. This design element was included to maintain the full accuracy of the barrel.

    The iconic Phase 5 Hex design gives the FATman Hex Brake the perfect styling that custom gun builders are looking for.

    - Mil-Spec Black Parkerized finish - Compatibility: 7.62X51/.308/300blk - Length: 3" - Width: 1.26" - Weight: 5.9oz - Threading: 5/8 - 24 TPI (Threads per Inch) - Includes (1) crush washer

    APPROX. 1.35 FROM BARREL CROWN WITH CRUSH WASHER INSTALLED. IF YOU PIN ON A 14.5" BARREL, MAKE SURE THE BOLT FACE TO END OF BRAKE IS >16.000" UNLESS TO ARE MAKING A NFA REGULATED WEAPON

    Learn More
  40. FATMAN-556 : Fatman Hex Brake - 5.56/.223 - 1/2 X 28 TPI
    $184.13

    The FATman Hex Brake was created to solve issues faced by many competition shooters and precision rifle builders.

    The 2 large (FAT) ventilated baffle sections and chambers create the compensation needed to reduce the overall recoil felt by the shooter.

    The FATman Hex Brake includes two top ports machined at a 20 Deg. forward directed angle. These top ports help direct the energy of the spent gas in a manner that maintains a flat consecutive result shot after shot.

    The design of the FATman Hex Brake allows the first chamber wall to sit as close to the barrel crown plane as possible. This design element was included to maintain the full accuracy of the barrel.

    The iconic Phase 5 Hex design gives the FATman Hex Brake the perfect styling that custom gun builders are looking for.

    - Mil-Spec Black Parkerized finish - Compatibility: 5.56mm/.223 - Length: 3" - Width: 1.26" - Weight: 6.1oz - Threading: 1/2 x 28 TPI (Threads per Inch) - Includes (1) crush washer

    APPROX. 1.35 FROM BARREL CROWN WITH CRUSH WASHER INSTALLED. IF YOU PIN ON A 14.5" BARREL, MAKE SURE THE BOLT FACE TO END OF BRAKE IS >16.000" UNLESS TO ARE MAKING A NFA REGULATED WEAPON

    Learn More
  41. FATman-9mm : FATman Hex Brake for 9mm
    Phase 5 Weapon Systems, Inc
    FATman-9mm : FATman Hex Brake for 9mm
    $184.13

    The FATman Hex Brake was created to solve issues faced by many competition shooters and precision rifle builders.

    The 2 large (FAT) ventilated baffle sections and chambers create the compensation needed to reduce the overall recoil felt by the shooter.

    The FATman Hex Brake includes two top ports machined at a 20 Deg. forward directed angle. These top ports help direct the energy of the spent gas in a manner that maintains a flat consecutive result shot after shot.

    The design of the FATman Hex Brake allows the first chamber wall to sit as close to the barrel crown plane as possible. This design element was included to maintain the full accuracy of the barrel.

    The iconic Phase 5 Hex design gives the FATman Hex Brake the perfect styling that custom gun builders are looking for.

    - Mil-Spec Black Parkerized finish - Compatibility: 9mm/ 7.62x39/ 6.8mm - Length: 3" - Width: 1.26" - Weight: 6.0oz - Threading: 1/2 x 36 TPI (Threads per Inch) - Includes (1) crush washer

    APPROX. 1.35 FROM BARREL CROWN WITH CRUSH WASHER INSTALLED. IF YOU PIN ON A 14.5" BARREL, MAKE SURE THE BOLT FACE TO END OF BRAKE IS >16.000" UNLESS TO ARE MAKING A NFA REGULATED WEAPON.

    Learn More
  42. Gas Block - Lo Pro : Lo Profile Gas Block - Bore Diameter .750"
    $73.88

    Low Profile Gas Block (Pinch Screw)

    This gas block replaces your existing front sight to provide a simple, low profile design that can be used to mount a rifle length forearm to a carbine length barrel. It is mounted by the use of two clamping screws.

    Manufactured from high quality steel, finished with a mil. spec. phosphate coating.

    Bore diameter of .750 inches.

    Includes (1) steel gas block and (1) stainless steel roll pin

    Learn More
  43. GAS KEY SET : Bolt Carrier Gas Key - Chromed Lined W/ 2 Socket Head Screws
    $32.01
    Heat Treated, Chrome Lined Gas Key. Includes (1) Gas Key & (2) Grade 8 Socket Head Screws. Learn More
  44. Gas Tube - Carbine : Carbine Length Gas Tube
    $28.09

    Carbine Length Gas Tube (with roll pin) AR-15

    Gas tube length: 9.75"

    Includes (1) gas tube and (1) stainless steel roll pin.

    Learn More
  45. Gas Tube - Mid : Mid Length Gas Tube
    Phase 5 Weapon Systems, Inc
    Gas Tube - Mid : Mid Length Gas Tube
    $28.09

    Mid Length Gas Tube (with roll pin) AR-15

    Gas tube length: 11.75"

    Includes (1) gas tube and (1) stainless steel roll pin.

    Learn More
  46. Gas Tube - Pistol : Pistol Length Gas Tube
    $25.63

    AR-15 Pistol length gas tube

    Gas tube length: 6.75"

    Includes (1) gas tube and (1) stainless steel roll pin.

    Learn More
  47. Gas Tube - Rifle : Rifle Length Gas Tube
    Phase 5 Weapon Systems, Inc
    Gas Tube - Rifle : Rifle Length Gas Tube
    $30.55

    Rifle Length Gas Tube (with roll pin) AR-15

    Gas tube length: 15.2"

    Includes (1) gas tube and (1) stainless steel roll pin.

     

    Learn More
  48. Hex-2 : Hex-2™ AR15 Pistol Buffer Tube
    Phase 5 Weapon Systems, Inc
    Hex-2 : Hex-2™ AR15 Pistol Buffer Tube
    $94.44

    The Phase 5 Hex-2™ is our newest AR type Pistol Buffer Tube. This tube has been specifically designed to utilize the Sig Sauer™ SB15 Pistol Stabilizing Brace. The Hex-2™ is a heavy duty USA certified 7075 T7 billet aluminum pistol buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately).

    Working closely with Sig Sauer™ the Phase 5 Hex-2™ was a special project that involved a number of firearms instructors, law enforcement professionals and AR Pistol enthusiasts alike. While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2™ has become the perfect component for any AR pistol build.

    The Hex-2™ even in its most basic package includes a castle nut, end plate and foam pad.

    Learn More
  49. Hex-2-BLUE : Hex-2 AR15 Pistol Buffer Tube - BLUE Anodize
    $94.44

    The Phase 5 Hex-2T is hexagonal shaped AR type Buffer Tube. This tube has been specifically designed to utilize the SB TacticalT Pistol Stabilizing Braces.

    The Hex-2T is a heavy duty USA certified 7075 T7 billet aluminum buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately).

    Working closely with SB TacticalT the Phase 5 Hex-2T Buffer Tube is a perfect match.  While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2T has become the perfect component for any AR pistol build.

    Includes:

    Hex-2 Buffer Tube
    Castle Nut
    End Plate
    Foam Pad

    Learn More
  50. Hex-2-C : Hex-2™ Complete AR15 Pistol Buffer Tube Assembly
    $128.00

    The Phase 5 Hex-2-C™ is part of our newest AR type Pistol Buffer Tube line.

    This tube has been specifically designed to utilize the Sig Sauer™ SB15 Pistol Stabilizing Brace. The Hex-2-C™ is a heavy duty USA certified 7075 T7 billet aluminum pistol buffer tube with the versatility to use the Phase 5 nitrile Foam Pad (included) or the SB15 Pistol Stabilizing brace (sold separately).

    Working closely with Sig Sauer™ the Phase 5 Hex-2-C™ was a special project that involved a number of firearms instructors, law enforcement professionals and AR Pistol enthusiasts alike. While asking questions along the way and updating the design based on the recommendations given by all; the Hex-2-C™ has become the perfect component for any AR pistol build.

    The Hex-2-C™ complete package includes a castle nut, end plate, Carbine Buffer, Phase 5 Enhanced Buffer Spring and foam pad.

    Learn More
View as List Grid

Items 1-50 of 192

Page
per page
Set Descending Direction
In Stock
© 2017 Gravel Agency Store. All Rights Reserved.