StormLake Barrels™

StormLake Barrels™
View as List Grid

Items 1-50 of 60

Page
per page
Set Descending Direction
In Stock
  1. 34000 : Glock 17 9mm 4.49" Standard Length
    $235.82

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  2. 34001 : Glock 17 9mm 4.49" Standard Length Isonite QPQ - Black
    $272.80

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  3. 34002 : Glock 17 9mm 5.19" Extended Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Learn More
  4. 34003 : Glock 17 9mm 5.19" Extented Length 1/2-28 Thread W/Thread Protector Isonite QPQ - Black
    $369.37

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  5. 34005 : Glock 17 9mm 5.19" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  6. 34009 : Glock 19 9mm 4.72" Extended Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  7. 34010 : Glock 19 9mm 4.72" Extended Length 1/2-28 Thread W/Threaded Protector Isonite QPQ - Black
    $369.37

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  8. 34012 : Glock 19 9mm 4.72" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  9. 34013 : Glock 20/20SF 10mm 4.60" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  10. 34014 : Glock 20/20SF 10mm 5.30" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  11. 34015 : Glock 20/20SF 10mm 6.02" Extended Length
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  12. 34016 : Glock 20/20SF 40S&W Conversion 4.60" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  13. 34017 : Glock 21/21SF 45ACP To 10mm Conversion 4.60" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  14. 34018 : Glock 21/21SF 45ACP To 10mm Conversion 6.02" Extended Length
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  15. 34021 : Glock 21/21SF 45ACP 5.30" Extended Length .578-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  16. 34026 : Glock 22 357Sig Conversion 4.49" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  17. 34027 : Glock 22 357Sig Conversion 5.19" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  18. 34029 : Glock 22 40S&W 4.49" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  19. 34032 : Glock 22 40S&W 5.19" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  20. 34036 : Glock 22 9mm Conversion 5.19" Extented Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  21. 34040 : Glock 23 40S&W 4.72" Extended Length 9/16-24 Thread W/Tread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  22. 34041 : Glock 23 40S&W 4.72" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  23. 34044 : Glock 23 9mm Conversion 4.72" Extended Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  24. 34045 : Glock 23 9mm Conversion 4.72" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  25. 34048 : Glock 26 9mm 4.16" Extended Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  26. 34059 : Glock 30/30SF 45ACP 4.48" Extended Length .578-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  27. 34061 : Glock 31 357Sig 4.49" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  28. 34065 : Glock 34 9mm 5.32" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  29. 34066 : Glock 34 9mm 5.32" Standard Length 4 Ports
    $286.97

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  30. 34069 : Glock 34 9mm 6.02" Extended Length 1/2-28 Thread W/Thread Protector Isonite QPQ - Black
    $369.37

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  31. 34070 : Glock 35 357Sig Conversion 5.32" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  32. 34072 : Glock 35 40S&W 5.32" Standard Length 4 Ports
    $286.97

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  33. 34073 : Glock 35 9mm Conversion 5.32" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. All Glock barrels are drop in and will only occasionally require modification to fit. Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide (available for models 17, 19, 20, 21, 22, 23, 26, 27, 29, 30, 31, 32, 33, 34, 35). Four port options are standard length barrels where all ports are within a slide cutout area - a cutout in the slide is required to accommodate the ports (available for models 17L, 24, 34, 35), or with all ports extended beyond the end of the slide (available for models 20 and 21). Six port options have a combination of the two ports beyond the end of the slide and four ports within the slide cutout area (available for models 34 and 35).

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  34. 34074 : 1911 Commander 45ACP 4.29" Standard Length Drop In Bull Unramped W/Link & Pin
    $257.13

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  35. 34075 : 1911 Commander 45ACP 4.29" Standard Length Drop In Unramped W/Link, Pin, & Match Fit Bushing
    $286.97

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  36. 34076 : 1911 Commander 45ACP 4.99" Ext Length Drop In Unramped .578-28 Thread W/Link, Pin, Bushing
    $385.00

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  37. 34081 : 1911 Government 45ACP 5.055" Standard Length Drop In Unramped W/Link, Pin & Match Fit Bushin
    $286.97

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  38. 34084 : 1911 Government 45ACP 5.755" Ext Length (5") Drop In Unramped .578-28 Thread W/Link, Pin
    $385.00

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  39. 34085 : 1911 Government 45ACP 5.755" Ext Length (5") Drop In Unramped .578-28 Thread W/Link, Pin
    $414.49

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.  Barrels are match grade, hardened to 40-42 HRC and cut broach rifled.

    Officer, Commander, and Government models available.

    Standard bushing style or bull barrel available for Commander and Government models.

    Extended length and threaded options are available.

    Oversize and drop-in options are available, as well as kit option combinations of link, pin, and bushing.  

    Ramp options include nonramped, Wilson/Nowlin, and Para ramp. Check with the manufacturer of your attachment to verify thread option before ordering. 

    Learn More
  40. 34092 : Springfield XD(m) 3.8 9mm 4.50" Extended Length 1/2-28 Thread W/ Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  41. 34094 : Springfield XD(m) 4.5 357Sig 4.60" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  42. 34097 : Springfield XD(m) 4.5 9mm 5.30" Ext Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  43. 34098 : Springfield XD(m) 4.5 9mm 5.30" Ext Length 1/2-28 Thread W/Thread Protector Isonite QPQ Blk
    $369.37

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  44. 34099 : Springfield XD(m) 4.5 9mm Conversion 4.60" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  45. 34102 : Springfield XD Service 357Sig 4.05" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  46. 34105 : Springfield XD Service 45ACP 4.75" Extended Length .578-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  47. 34108 : Springfield XD Service 9mm 4.75" Extended Length 1/2-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  48. 34113 : Springfield XD Tactical 45ACP 5.71" Extended Length .578-28 Thread W/Thread Protector
    $338.10

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy.

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support. 

    All XD barrels are drop in and will only occasionally require a gunsmith to fit.

    Extended lengths are available, as well as ported and threaded options. All models have a 2-port extended barrel option with the ports extending beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.  40S&W and 357Sig barrels are interchangeable.  XD(m) barrels and conversions are currently only available for the 40S&W and 9mm 4.5 and 3.8 models.

    Learn More
  49. 34116 : Smith&Wesson M&P Full Size 357Sig 4.25" Standard Length
    $240.09

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
  50. 34117 : Smith&Wesson M&P Full Size 357Sig 4.95" Extended Length 2 Ports
    $264.23

    Machined from certified 416R stainless steel for superior strength, durability, and accuracy. 

    Barrels are match grade, hardened to 40-42 HRC and cut broach rifled to shoot jacketed or lead bullets.

    All barrels are chambered for full case support.

    All Smith & Wesson M&P barrels are drop in and will only occasionally require modification to fit.

    Extended lengths are available, as well as ported and threaded options.

    Two port options are extended barrels with ports beyond the end of the slide.

    Check with the manufacturer of your attachment to verify thread option before ordering. 40S&W-to-9mm conversion barrels require the use of a 9mm magazine.

    Learn More
View as List Grid

Items 1-50 of 60

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.