Gunsmith Services

View as List Grid

48 Items

per page
Set Descending Direction
In Stock
  1. GS00 : Hourly Rate
    Gunsmith Services
    GS00 : Hourly Rate
    $75.00

    Service available for :

    • Remington®
    • Bushmaster®
    • DPMS®
    • Marlin®
    • Para®
    • H&R®
    • Other Brands
    Learn More
  2. GS01 : Trigger Adjustment
    Gunsmith Services
    GS01 : Trigger Adjustment
    $75.00

    Adjusting the weight of pull and sear engagement of your trigger to ensure a smooth, crisp pull every shot within the trigger’s manufacturer’s specifications.

    Learn More
  3. GS02 : Barrel Lapping (add the fees of 2 boxes of ammo)
    $300.00

    The more technical term for “breaking in” your rifle. This lengthy process starts with a thorough cleaning of the firearm. What follows is alternating between firing and cleaning the firearm – with cleaning after every shot for the first ten shots, then after every three shots for the remaining ammunition and ending with a last thorough cleaning. This ensures that your bore is clean of any impurity following its manufacturing and installation.

    Learn More
  4. GS03 : Bolt lugs lapping
    Gunsmith Services
    GS03 : Bolt lugs lapping
    $90.00

    These lugs insure that your chamber is securely locked when you break that shot. Proper contact means that your round is properly aligned in your chamber thus increasing accuracy. This may require a headspace readjustment.

    Learn More
  5. GS04 : Glass bedding (Recoil Lug only)
    $100.00

    A proper fiber glass bedding job will strengthen the stock by giving increased stiffness. The recoil lug, as the name implies, is the portion of your firearm which absorbs most of the recoil and transfers this energy in the stock. Reinforcing this area translates to better consistency shot after shot and will improve your downrange performance.

    Learn More
  6. GS05 : Glass bedding (Action and recoil lug)
    $150.00

    A proper fiber glass bedding job will strengthen the stock by giving increased stiffness. The recoil lug, as the name implies, is the portion of your firearm which absorbs most of the recoil and transfers this energy in the stock. Reinforcing this area translates to better consistency shot after shot and will improve your downrange performance. Bedding the action and lug ensures superb stiffness and support.

    Learn More
  7. GS06 : Glass bedding (Full length)
    $290.00

    A proper fiber glass bedding job will strengthen the stock by giving increased stiffness. This translates to better consistency shot after shot and will improve your downrange performance. Bedding the action, recoil lug and barrel for the stock’s length gives incomparable stiffness.

    Learn More
  8. GS07 : Scope Installation
    Gunsmith Services
    GS07 : Scope Installation
    $60.00

    Self-descriptive task albeit one that takes precision and attention to details to ensure proper results. Manufacturer’s recommendations are followed when it comes to torqueing specifications. This installation involves a 100 m bore sighting adjustment, ensuring that all your shots will be on the paper when you do the final adjustments.

    Learn More
  9. GS08 : Scope Ring Lapping
    Gunsmith Services
    GS08 : Scope Ring Lapping
    $60.00

    Mass-produced scope rings may not be as concentric as their manufacturer claims them to be. This process involves a careful removal of material within the inner diameter of your rings to ensure that they are properly concentric, ensuring there is no undue stress or point of contact on your optical system thus affecting accuracy.

    Learn More
  10. GS09 : Sighting in
    Gunsmith Services
    GS09 : Sighting in
    $65.00

    Self-explanatory sight adjustment at the range for those who want a professional to get it done. This is performed with the consumer’s ammunition. “X” boxes of ammunition required.

    Learn More
  11. GS10 : Detachable Magazine Installation
    $100.00

    Converting a floor plate-style rifle to a magazine-fed one requires careful fitting of the new trigger guard and magazine well to ensure reliable feeding and cycling. This process involves a widening of the magazine well and the fitting of the trigger guard seating depth.

    Learn More
  12. GS11 : Detachable Magazine Installation ( ADL )
    $200.00

    Similar to the aforementioned GS10. ADL™-style stocks do not have a floorplate which means that the magazine well needs to be cut into the stock.

    Learn More
  13. GS12 : Crowning - 11 Degree
    $80.00

    Cutting the crowning of your firearm at 11 degrees is what most experts recommend. This will allow proper dispersion of gases once the bullet clears the rifling and will improve accuracy while protecting the latter in case of impact.

    Learn More
  14. GS13 : Complete Firearm Cleaning (Bolt Action/Break Barrel)
    $75.00

    Complete firearm disassembly followed by a detailed cleaning of the receiver, parts and barrel. Choke tubes are removed, cleaned and reinstalled.

    Learn More
  15. GS14 : Complete Firearms Cleaning (Pump/Semi-Auto/Lever)
    $90.00

    Complete firearm disassembly followed by a detailed cleaning of the receiver, parts and barrel. Choke tubes are removed, cleaned and reinstalled.

    Learn More
  16. GS15 : Drill & Tap ( Unite Price Per Hole)
    $35.00

    Although it is a fairly simple procedure, drilling and tapping holes requires precise calculations and impeccable alignment to ensure accuracy.

    Learn More
  17. GS16 : Bolt handle threading
    $60.00

    Threading of the bolt handle to the desired thread pitch for subsequent aftermarket handle installation.

    Learn More
  18. GS17 : Oversize bolt handle installation - Complete bolt refinish
    $160.00

    After threading your bolt handle, an oversized knob is installed. Following this, the entire bolt body and new knob get refinished. (Cerakote™, sand/bead blast and polished stainless finishes only)

    Learn More
  19. GS18 : Oversize bolt handle Installation - Bolt knob refinish only
    $140.00

    After threading your bolt handle, an oversized knob is installed. Following this, knob gets refinished. (Cerakote™, sand/bead blast and polished stainless finishes only)

    Learn More
  20. GS20 : Muzzle threading
    Gunsmith Services
    GS20 : Muzzle threading
    $90.00

    Threading of the barrel’s muzzle to the desired thread pitch for the installation of a muzzle device.

    Learn More
  21. GS21A : Muzzle brake installation, Seamless fitting matching stainless steel finish
    $220.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to match the barrel’s contour for a seamless fit. We then match the stainless finish, whether it is matte, satin or high gloss.

    Learn More
  22. GS21B : Muzzle brake installation, Seamless fitting Cerakote™ finish on all metal components
    $460.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to match the barrel’s contour for a seamless fit. We then refinish the receiver, bolt, recoil lug, barrel and muzzle brake with Cerakote™.

    Learn More
  23. GS21C : Muzzle brake installation, Seamless fitting Cerakote™ finish from recoil lug to muzzle brake
    $250.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to match the barrel’s contour for a seamless fit. We then refinish the recoil lug, barrel and muzzle brake with Cerakote™.

    Learn More
  24. GS21D : Muzzle brake installation, Seamless fitting complete firearm high gloss blueing
    $520.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to match the barrel’s contour for a seamless fit. We then polish the metal to a glossy sheen and blue it.

    Learn More
  25. GS21E : Muzzle brake installation, Seamless fitting complete firearm blueing satin or matte
    $365.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to match the barrel’s contour for a seamless fit. We then treat the entire firearm to the desired finish before blueing it.

    Learn More
  26. GS22 : Muzzle brake installation, Close fitting with crush washer, finish included on muzzle brake
    $170.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to as close as possible to the barrel’s contour for a near-perfect match. After installing a crush washer, we then match the muzzle brake finish to the barrel’s regardless if it is stainless steel, blued or Cerakote™.

    Learn More
  27. GS23 : Muzzle Brake Installation, Close fitting finish included on muzzle brake
    $207.00

    After threading the muzzle, we turn down the outer diameter of the newly installed muzzle break to as close as possible to the barrel’s contour for a near-perfect match.

    Learn More
  28. GS24 : Blueing - Matte Finish (SPS/Express)
    $200.00

    Hot blueing of the complete firearm after being sandblasted. The finish is comparable to a 700™ SPS™ or 870™Express®.

    Learn More
  29. GS25 : Blueing -  Bead blast satin finish (CDL)
    $250.00

    Hot blueing of the complete firearm after it being bead blasted. This finish is comparable to the model 700™ CDL™.

    Learn More
  30. GS26 : Blueing - High gloss polished finish (BDL) - Rifle
    $350.00

    Hot blueing of the complete firearm after being polished to a glossy sheen. The final result is comparable to a 700™ BDL™ finish.

    Learn More
  31. GS27 : Blueing - High Gloss polished finish (Wingmaster) - Shotgun
    $400.00

    Hot blueing of the complete firearm after being polished to a glossy sheen. The final result is comparable to an 870™ Wingmaster® finish.

    Learn More
  32. GS28 : Cerakote™ Finish - Bolt/Semi/Pump Firearms (Metal parts only, no stock or accessories)
    $300.00

    Cerakote™ is a polymer-ceramic coating which gives your firearm a superb finish that resists corrosion and abrasion exceptionally well. The product is applied to the prepared surface and is then “cooked” in an oven to ensure maximum hardness and quality.

    Learn More
  33. GS29 : Cerakote™ Finish - AR Platforms and lever action firearms (Metal parts only)
    $350.00

    Cerakote™ is a polymer-ceramic coating which gives your firearm a superb finish that resists corrosion and abrasion exceptionally well. The product is applied to the prepared surface and is then “cooked” in an oven to ensure maximum hardness and quality.

    Learn More
  34. GS30 : Cerakote ™ - Break action complete (Metal components only, no stock or fore-end)
    $250.00

    Cerakote™ is a polymer-ceramic coating which gives your firearm a superb finish that resists corrosion and abrasion exceptionally well. The product is applied to the prepared surface and is then “cooked” in an oven to ensure maximum hardness and quality.

    Learn More
  35. GS32 : Refinish Stainless Steel - Polished
    $250.00

    High gloss, chrome-like look for your stainless steel firearm. This is accomplished by meticulously polishing the firearm to a glossy sheen.

    Learn More
  36. GS33 : Refinish Stainless Steel - Beadblast Satin (700 5R finish)
    $150.00

    We take your stainless steel firearm in our blasting cabinet to give it a satin finish using glass bead medium.

    Learn More
  37. GS34 : Refinish Stainless Steel - Sandblast Matte (SPS Stainless finish)
    $100.00

    We take your stainless steel firearm to our blasting cabinet to give it a matte finish using sandblasting medium.

    Learn More
  38. GS35 : Complete Firearm Inspection (Without firing test)
    $55.00

    Our qualified gunsmiths inspect your firearm top to bottom, inside and out and determine what can be done to improve an already great product.

    Learn More
  39. GS36A : Inspection/Accuracy test (Rimfire caliber - Ammunition Costs Included)
    $96.00

    Our qualified gunsmiths inspect your firearm top to bottom, inside and out and determine what can be done to improve an already great product. We then bring the firearm to the range and test the accuracy with our ammunition. We test your firearm with Remington® and/or Barnes® ammunition only. We test out the rifle with our own scope, bases and rings.

    Learn More
  40. GS36B : Inspection/Accuracy test (Rimfire magnum caliber - Ammunition Costs Included)
    $112.00

    Our qualified gunsmiths inspect your firearm top to bottom, inside and out and determine what can be done to improve an already great product. We then bring the firearm to the range and test the accuracy with our ammunition. We test your firearm with Remington® and/or Barnes® ammunition only. We test out the rifle with our own scope, bases and rings.

    Learn More
  41. GS36C : Inspection/Accuracy test (Centrefire standard caliber - Ammunition Costs Included)
    $122.00

    Our qualified gunsmiths inspect your firearm top to bottom, inside and out and determine what can be done to improve an already great product. We then bring the firearm to the range and test the accuracy with our ammunition. We test your firearm with Remington® and/or Barnes® ammunition only. We test out the rifle with our own scope, bases and rings.

    Learn More
  42. GS36D : Inspection/Accuracy test (Centrefire magnum caliber - Ammunition Costs Included)
    $135.00

    Our qualified gunsmiths inspect your firearm top to bottom, inside and out and determine what can be done to improve an already great product. We then bring the firearm to the range and test the accuracy with our ammunition. We test your firearm with Remington® and/or Barnes® ammunition only. We test out the rifle with our own scope, bases and rings.

    Learn More
View as List Grid

48 Items

per page
Set Descending Direction
In Stock
© 2017 Gravel Agency Store. All Rights Reserved.