Shooting

View as List Grid

Items 1-50 of 8431

Page
per page
Set Descending Direction
In Stock
  1. 01-GB-G17-NTH-BLK : G17 FLUTED NON THREADED BLACK BBL
    $364.80

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  2. 01-GB-G17-NTH-SS : G17 FLUTED NON THREADED SS BBL
    $364.80

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  3. 01-GB-G17-TH-BLK : G17 FLUTED THREADED BLACK BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  4. 01-GB-G17-TH-BRNZ : G17 FLUTED THREADED BRONZE BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  5. 01-GB-G17-TH-SS : G17 FLUTED THREADED SS BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  6. 01-GB-G19-TH-BLK : G19 FLUTED THREADED BLACK BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  7. 01-GB-G19-TH-BRNZ : G19 FLUTED THREADED BRONZE BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  8. 01-GB-G19-TH-SS : G19 FLUTED THREADED SS BBL
    $437.79

    Professional upgrade drop in barrels for Gen 3 & 4 Glock 17 & 19 Pistols. Our Match Grade barrels are precision machined from Certified pre hardened DFARS compliant 416R chromium gun barrel quality stainless steel, to extremely tight tolerances and exacting details.
    416R stainless steel is renowned for its corrosion resistance, machinability and high tensile strength, it is the industry standard for Match Grade barrel manufacturing.
    Lantacs machining and production process delivers an ultra-precise barrel with tightened slide fit & lock up for improved accuracy.
    Our barrels are 6 groove, cut rifled, 1:10 Twist Right Hand, fully inspected, double honed (rough and finish) to produce a bore with a Max Roughness Average (RA) of 12.
    Chambers are Match Grade SAAMI specification, precision cut and polished to a maximum Roughness Average (RA) of 16.
    The pre hardened 416R stainless steel is stress relieved to a proprietary recipe after rifling and final hardness is 38-42 Rockwell C before final shaping and profiling work is done.
    Final dimension are held to a +/- 0.0002" deviation for maximum consistency , accuracy and quality.

    Learn More
  9. 01-GP-45-USS : GLOCK ULTIMATE SPRING SET 4.5LB
    $17.68

    Springs are manufactured from the highest grade piano wire and tempered for the best service life. Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

    With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

    The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

    Manufactured in the USA.

    Learn More
  10. 01-GP-6-USS : GLOCK ULTIMATE SPRING SET 6LB
    $17.68

    Springs are manufactured from the highest grade piano wire and tempered for the best service life. Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

    With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

    The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

    Manufactured in the USA.

    Learn More
  11. 01-GP-65-USS : GLOCK ULTIMATE SPRING SET 6.5LB
    $17.68

    Springs are manufactured from the highest grade piano wire and tempered for the best service life. Each spring is calibrated to deliver consistent force through the entire compression cycle for reliable operation every time the pistol is fired.

    With nearly 30% more power our Trigger Spring actually reduces the pull weight by as much as 1Lb.

    The lower power Firing Pin Safety Spring reduces friction caused by the firing pin plunger engaging with the trigger bar and creates a much smoother operation of the parts.

    Manufactured in the USA.

    Learn More
  12. 01-GP-ECT69-4-1719 : GLOCK E-CTG9 TRIGGER G17 & G19 GEN4
    $257.51

    Precision Upgrade Trigger for Glock 17, 19 Gen 1-3 & Gen4 Pistols.

    The Ultimate drop in trigger for your pistol, the E-CTG9™ trigger can be configured for Carry (Self Defense) or Competition (Target) use and comes complete with our improved trigger spring kit so you can set the ultimate trigger pull on your handgun.

    The trigger housing features our SSR (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and reshaped to reduce friction and create a much smoother, lighter more consistent pull.

    This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

    Our Trigger Bar is manufactured from a proprietary blend of 420 Stainless Steel and polished to produce an ultra smooth hard-wearing surface that reduces friction and trigger pull interference as it operates against the connector and internally against the pistol frame.

    Learn More
  13. 01-GP-ESP-SS : ULTRASMOOTH GLOCK FIRING PIN SAFETY 17&19 SS
    $28.59

    Precision machined from 17-4PH Stainless Steel.

    Firing Pin Safety Plunger with an ultra smooth domed head, reduces friction and trigger pull weight.

    Comes complete with a reduced power spring for additional smoothness to trigger pull.

    Fits most 9MM, .40S&W, .357 Sig, 10mm & .45 GAP Glock Pistols.

    Manufactured in the USA.

    Learn More
  14. 01-GP-GR17-NIT : G17 GUIDE ROD BLK NITRIDE
    $42.23

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    Learn More
  15. 01-GP-GR19-NIT : G19 GUIDE ROD BLK NITRIDE
    $42.23

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    Learn More
  16. 01-GP-GR19-SS : G19 GUIDE ROD SS
    $42.23

    Upgrade Flared Head, Non Captive Guide rods.

    Machined from 17-4PH Stainless Steel & hand polished to give an ultra smooth surface finish.

    Available in Stainless & QPQ Nitride coating.

    Flared head creates a more concentric and consistent lock up of the slide, spring & rod.

    Fits all Gen 1-3 17 & 19 Glock Pistols.

    Fits Gen 4 Pistols with use of the GB-G4™ Adapter Bushing.

    Not for use with flat wire springs.

    Wolff springs recommended.

    Manufactured in the USA.

    Learn More
  17. 01-GP-GRA-NIT : GEN 4 GUIDE ROD ADAPTER BLK NITRIDE
    $23.14

    LANTAC Glock Gen 4 Guide Rod Adapter GB-G4-S - Black nitride Finish, is machined from 17-4PH stainless steel. The adapter has an aggressive knurled pattern and a recessed spring capture area for easier assembly.

    LPrecision 17-4PH Stainless Steel Adapter Bushings with ultra smooth bore and crenulated crown, for reduced friction performance and aggressive styling.

    Black nitride finish.

    Learn More
  18. 01-GP-GRA-SS : GEN 4 GUIDE ROD ADAPTER SS
    $23.14

    LANTAC Glock Gen 4 Guide Rod Adapter GB-G4-S - Stainless Stell Finish, is machined from 17-4PH stainless steel. The adapter has an aggressive knurled pattern and a recessed spring capture area for easier assembly.

    LPrecision 17-4PH Stainless Steel Adapter Bushings with ultra smooth bore and crenulated crown, for reduced friction performance and aggressive styling.

    Stainless Steel finish.

    Learn More
  19. 01-GP-TDISC : 3.5LB TRIGGER DISCONNECTOR
    $21.76

    SSR™ (Super Short Reset) 3.5Lb Connector that delivers the same trigger profile as the factory unit but is highly polished and reshaped to reduce friction and create a much smoother, lighter more consistent pull. This connector makes super fast reset of the trigger possible, allowing for very quick follow up shots and reduced friction means less resistance for smooth operation.

    Manufactured in the USA.

    Learn More
  20. 01-GP-TP-BLK : TP-PRO THREAD PROTECTOR BLK
    $42.23

    Lantac TP-PRO, Thread Protector Pro

    Precision machined from 416R Stainless Steel with an agressive knurled pattern these thread protectors are cut with a 1/2-28 UNEF threads and chamfered both ends for easy start.

    Color options are:

    Black, DLC Diamond Like Carbon PVD Finish

    Each thread protector comes compltete with a high temp Viton 'O' ring for easy retention of the protector when mounted on the barrel.

    Manufactured in the USA.

    Learn More
  21. 01-GP-TP-BRNZ : TP-PRO THREAD PROTECTOR BRONZE
    $42.23

    Lantac TP-PRO, Thread Protector Pro

    Precision machined from 416R Stainless Steel with an agressive knurled pattern these thread protectors are cut with a 1/2-28 UNEF threads and chamfered both ends for easy start.

    Color options are:

    Bronze, TiALN Titanium Aluminium Nitride Finish

    Each thread protector comes compltete with a high temp Viton 'O' ring for easy retention of the protector when mounted on the barrel.

    Manufactured in the USA.

    Learn More
  22. 01-GS-GEN13-G17-LT : RAZORBACK GEN 1-3 G17 LIGHT SLIDE
    $1,167.69

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    Learn More
  23. 01-GS-GEN13-G19 : RAZORBACK GEN 1-3 G19 SLIDE
    $1,266.16

    Aggressive styling meets precision engineering in the form of our new Razorback™ slides for Glock 17 & 19 Pistols.

    Machined from pre-hardened (H900 condition) 17-4PH (Precipitation Hargened) stainless steel, bead blasted to create a satin surface finish and then PVD (Physical Vapor Deposition) coated with DLC (Diamond Like Carbon) for a superior protective coating.

    The Me-DLC coating used has an extremely smooth surface co-efficient of 0.1 and micro hardness of 1000-2000HV (Vickers Hardness) and is chemically inert, it has been shown to prolong part lifespan by upwards of 10 times normal service life.

    Slides are available for Generation 1-3 & 4 and feature RMR cuts as standard.

    RMR blanking plates are fitted as standard with Torx head screws and are machined with a continuous grip texture that flows from the slide across the plate.

    Slides come complete with Tijicon® Bright & Tough tritium sights,

    LANTAC  GFP-E™lightened firing pin and 4.5lb striker spring,

    LANTAC ESP-S™ ultra smooth safety plunger and reduced power spring,

    LANTAC 17-4 Stainless billet extractor and high quality Glock small parts.

    Reduced power firing pin springs are available seperately. 

    Manufactured in the USA.

    Learn More
  24. 01-HG-006-SPADA-ML : SPADA-M 6.75" FREEFLOAT RAIL LIGHTWEIGHT
    $243.87

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  25. 01-HG-010-SPADA-ML : SPADA-M 10.5" FREEFLOAT RAIL LIGHTWEIGHT
    $261.61

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  26. 01-HG-013-SPADA-ML : SPADA-M 13.5" FREEFLOAT RAIL LIGHTWEIGHT
    $276.57

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  27. 01-HG-015-SPADA-ML : SPADA-M 15" FREEFLOAT RAIL LIGHTWEIGHT
    $284.76

    Machined from Extruded 6005A-T6 Aluminum and Type 3 Hardcoat Anodised, Class2 Deep Black.
    Durable and Robust design with Ultra narrow diameter.

    Learn More
  28. 01-LP-ECT1F : E-CT1 3.5LB SINGLE STAGE FLAT TRIGGER
    $315.29

    Advanced performance meets precision machining and ultra slick styling in the shape of the new E-CT1™ Single Stage Trigger from LANTAC.
    Available in both Hybrid Curve & Flat Bow designs to suit any shooters preference the E-CT1™ is also offered in a variety of pull weights and configurations, meaning you can run it in a Duty Rifle or in competition at the range.
    The trigger features massive improvements over the original with entirely different sear engagement surfaces that remove creep and deliver a super crisp break. Radically different internal geometry also creates insanely short reset and near non existent over travel that will greatly decrease split times and give you a big advantage over the competition.

    The Hammer, Trigger & Disconnector are precision machined from S7 tool steel with a proprietary sear manufacturing process that yields an incredibly smooth engagement surface and all parts are then case hardened before Black Oxide finish.

    The CNC machined Aluminum cassette has adjustment set screws built in that allows the user to set perfect pin tension and the trigger can be installed with standard pins or the threaded screw types seen in previous designs.
    The cassette is Type 3 Hard Coat Anodized Class2 Black and then Laser engraved for identification.

    Learn More
  29. 01-LP-RTT : REAR TAKEDOWN TOOL
    $12.25

    The RTT™ is a DLC (Direct Laser Sintered) 3D printed stainless steel tool that allows the user to remove the rear takedown pin on an AR15 receiver without having to un-stake and remove the Castle Nut & End Plate.

    The tool is inserted into the slot on the rear takdown and features a ramp that allows the detent to ride up and out of the channel onto the outer diameter of the pin.

    The pin can then be removed and a Pivot Pin used to hold the detent back while a new pin is inserted.

    Ideal for swapping out damaged or replacement pins.

    Learn More
  30. 01-LP-UPS : ULTIMATE TAKEDOWN PIN SET
    $42.23

    UPS-S™  Ultimate Takedown Pin Set.

    Precision machined on Swiss style turning centers our Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards.
    They ship complete with our 3D printed rear pin removal tool (RTT™).
    The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
    The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot
    at 90° to groove.
    Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
    The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
    This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
    QUICKSAFE™
    Our UPS™ Pin system has a built in safety feature that can be utilized by anyone wanting to make it difficult for an Upper Receiver to be fitted to a Lower Receiver.
    To render a lower receiver inoperable the user can quickly remove the front Pivot Pin (Spring & Detent) and insert it through the rear Takedown pin hole from
    the other side of the receiver. Then remove the rear Takedown and allow the Pivot Pin to retain its detent.
    If the pin is rotated so that the detent registers with the groove on its end then it becomes impossible to remove the pin without removing the castle nut and end plate. 
    It is now impossible to mount an upper receiver group to the lower and have a functioning assembly.
    Pins are manufactured from 17-4PH stainless steel in H900 condition and then QPQ Nitride finished.

    Learn More
  31. 01-LP-UPS-TI : ULTIMATE TAKEDOWN PIN SET TITANIUM
    $55.82

    UPS-Ti™
    Ultimate Takedown Pin Set.

    Precision machined on Swiss style turning centers our Ultimate Takedown Pin sets are manufactured from the highest quality materials to the highest standards.
    They ship complete with our 3D printed rear pin removal tool (RTT™).
    The Patent Pending UPS™ (Ultimate Pin Set) allows the user to install and remove an AR15 Pivot Pin without the use of a tool.
    The unique design incorporates a ramped groove that holds the detent in place at the time of installation and another ramp allows access to the retaining slot
    at 90° to groove.
    Pins feature Patent Pending aggressively crenulated heads for improved grip, this facilitates easier removal of the pin from the receiver.
    The rear pin features the same retaining slot and ramp, meaning that it can be removed easily by sliding it to a halfway position and then rotating.
    This causes the takedown detent to ride up the ramp and onto the outer surface of the pin, making remove extremely simple.
    QUICKSAFE™
    Our UPS™ Pin system has a built in safety feature that can be utilized by anyone wanting to make it difficult for an Upper Receiver to be fitted to a Lower Receiver.
    To render a lower receiver inoperable the user can quickly remove the front Pivot Pin (Spring & Detent) and insert it through the rear Takedown pin hole from
    the other side of the receiver. Then remove the rear Takedown and allow the Pivot Pin to retain its detent.
    If the pin is rotated so that the detent registers with the groove on its end then it becomes impossible to remove the pin without removing the castle nut and end plate. 
    It is now impossible to mount an upper receiver group to the lower and have a functioning assembly.
    Pins are manufactured from Grade 5 Titanium and left in a natural finished condition.

    Learn More
  32. 01-MD-A2-BMD-COMP : [LA00265]BMD 556 Blast Mitigation Device
    $288.70

    The BMDT is a unique blast shield that allows the muzzle brake contained inside it to continue to function as normal with regard to muzzle climb mitigation. The patent pending design features unique "through" ports that connect the muzzle brakes vertical vents to the outside atmosphere.

    This feature allows the brake to function while within the device unlike other system that alter the way the original device works and inevitably remove or massively reduce efficiency.
    The device also features sets of "diffuser" grids positioned towards the top of the blast shield that assist in allowing gas to vent upwards as well as forwards at the time of firing, assisting even further in muzzle control.
    Concussive muzzle blast is directed forwards, down range and away from other shooters and team mates.
    Radial teeth at the exit aperture help to disrupt blast gas at it exits the device.

    The BMDT is mounted to the DGN556BT Muzzle Brake through the use of an adapter collar. The collar is designed to fit as wide a range of brake outside diameters as possible and can effectively be mounted within the following size range:
    .855"' to .872"' Diameter.

    It is recommended that you use a quality set of vernier and check the outside diameter of your muzzle device before ordering.
    Diameters outside the ranges listed may need additional gunsmith work to be fitted or may not be used with this product.
    Measurements should be taken from the circular section of the brake marked with the "LANTAC" logo.

    The BMDT mounts to the collar via the use of two rugged clips that must both be depressed together in order to remove the device from its mount..

    The device ships with a vial of Rocksett that must be used to ensure all mounting set screws are retained in place when the adapter is mounted to the brake.

    Learn More
  33. 01-UP-556-CP : SMOOTHCAM DOMED CAM PIN 223/556
    $42.23

    The CP-R360™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 556 ONLY

    Made in the USA.

    Learn More
  34. 01-UP-556-FPIN : FIRING PIN 223/556
    $28.59

    High Quality Replecment .223/5.56 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    Learn More
  35. 01-UP-556-NIB-EXKIT : EXTRACTOR KIT 223/556 NIB
    $42.23

    Replacement .223/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA

    Learn More
  36. 01-UP-556-NIT-BA : BOLT ASSEMBLY 223/556 BLK NIT
    $160.74

    Replacement Carpenter 158 Bolt Assembly

    Hard Ground Critical Diameters

    S110 Shot Peened, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    Black QPQ Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  37. 01-UP-556-NIT-EBCG : ENHANCED BCG 223/556 BLK NITRIDE
    $424.23

    LANTAC E-BCG®, Enhanced Bolt Carrier Group.

    M16 Full Auto Style for increased mass and lock time.
    Our BCG is precision machined from 8620 steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.

    The entire carrier assembly is QPQ (Quench Polish Quench) Nitride coated Black, this is a specialized type of Nitrocarbrising Case Hardening that creates a vary hard, smooth surface with increased corrosion resistance and low coefficient of friction.
    The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been resized so that gas is vented differently to a standard carrier.
    This results in a system that runs flatter with a smoother energy pulse with a softer start to carrier movement.

    In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.  The flared boss at the tail of the carrier enhances the BCG's lock position within the upper and makes it more consistent, resulting in an accuracy improvement.
    All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.

    All E-BCG's® feature the LANTAC CP-R360™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
    The ultra smooth head reduces wear within the upper receiver.
    The BCG's 11.7oz weight helps to increase lock time and smoother operation.
    Gas keys are fitted with gasket sealer & are properly staked at four points and only grade 8 fasteners are used in assembly.

    The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
    However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.  

    Learn More
  38. 01-UP-762-BOLTEJK : BOLT EJECTOR KIT 308/762
    $23.14

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    Made in the USA.

    Learn More
  39. 01-UP-762-CPH : SMOOTHCAM DOMED CAM PIN 308/762 HEAVY
    $42.23

    The CP-R360-H™ Cam Pin has no moving parts to break or lock up.
    Machined from 17-4 PH Stainless Steel and hardened to H900 (45RC Approx) its head is polished for a super smooth finish. The cam pins circular head has a single flat face machined into it at the front so that it can be inserted into any bolt carrier without having to remove the gas key.
    Two further flats are machined at 90 degrees to the front face that assist in reducing internal wear to the cam channel.
    The unique domed head allows the cam pin to operate in a completely different position to a traditional pin, with the radius of the head curving away from the receivers internal surface, rather than forming a hard or sharp edge on its upper corner that causes wear.
    Finished in its natural hardened state, copper/brass color.

    NOTE:  Works on all Mil-Spec BCGs, 308/7.62 ONLY

    Made in the USA.

    Learn More
  40. 01-UP-762-FPIN : FIRING PIN 308/762
    $34.04

    High Quality Replecment .308/7.62 Firing PIn.

    8740 CS Steel

    45-49 HRC, Hard Chrome Plated, MIL-STD-171 1.2.2.4

    Learn More
  41. 01-UP-762-NIB-EXKIT : EXTRACTOR KIT 308/762 NIB
    $49.03

    Replacement .308/7.62 Extractor Assembly

    Comes complete with retaining pin, top hat insert, spring and 'O' ring.

    NiB Finished.

    Made in the USA.

    Learn More
  42. 01-UP-762-NIT-BA : BOLT ASSEMBLY 308/762 BLK NIT
    $167.55

    Replacement 9310 Steel Bolt Assembly

    Hard Ground Critical Diameters, Heat Treated 15N 89-90.5 Hardness.

    Magnetic Particle Inspected.

    Black QPQ Finished.

    Complete Assembly.

    Made in the USA.

    Learn More
  43. 01-UP-762-NIT-EBCG : ENHANCED BCG 308/762 BLK NITRIDE
    $538.64

    LANTAC E-BCG®, Enhanced Bolt Carrier Group.

    M16 Full Auto Style for increased mass and lock time.
    Our BCG is precision machined from 8620 Steel with a shot peened bolt manufactured from Carpenter 158 and Magnetically Particle Inspected.

    The entire carrier assembly is QPQ (Quench Polish Quench) Nitride coated Black,this is a specialized type of Nitrocarbrising Case Hardening that creates a vary hard, smooth surface with increased corrosion resistance and low coefficient of friction.
    The carriers patented and patent pending design features unique shrouded and forward facing gas ports that have also been resized so that gas is vented differently to a standard carrier.  This results in a system that runs flatter with a smoother energy pulse with a softer start to carrier movement.

    In addition the system also runs cooler and cleaner, there is also less pressurization of the upper receiver when running a suppressed barrel.  The flared boss at the tail of the carrier enhances the BCG's® position within the buffer tube at the time of cycling and makes it more consistent, resulting in smoother operation.
    All critical dimensions are hard turned / ground after heat treat and the gas key has been hard chrome lined for the best possible wear resistance.

    All E-BCG's® feature the LANTAC CP-R360-H™ patent pending domed head cam pin that is machined from 17-4PH Stainless Steel and hardened to H900 condition (45RC approx).
    The ultra smooth head reduces wear within the upper receiver.
    The BCG's 1Lb 2.1oz weight helps to increase lock time and smoother operation.
    Gas keys are fitted with gasket sealer & are properly staked at four points and only grade 8 fasteners are used in assembly.

    The E-BCG's® forward porting and unique shape assist in reducing pressurization inside the upper receiver that can be caused by short barrel rifles running suppressors.
    However, it should be noted that the E-BCG® is not a complete solution for this issue and all rifles are different. 'Over Gassed' guns will suffer to a larger extent from this problem.

    Learn More
View as List Grid

Items 1-50 of 8431

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.