Accessoires d'optique

Afficher en Liste Grille

Produits 1-50 sur 52

Page
par page
Par ordre décroissant
En stock
  1. 22TRC : Tactical Ring Cap
    59,95 $

    For use on all A.R.M.S.® #21T, #22T, and #35T Ring saddles. Shown with #22TRRT (Front ring) and #22TRST (Rear ring) attached. 100% MADE IN THE USA.
     
    This unique ring cap was designed to expand the standard use of a cap normally only holding a scope in position, to that of allowing modular enhancements on various conventional optics by simply removing the standard cap and installing the tactical cap using the same socket head screws.

    En savoir plus
  2. 30855 : RAIL MOUNT ANTI-CANT DEVICE
    Knight‵s Armament Company
    30855 : RAIL MOUNT ANTI-CANT DEVICE
    137,97 $
    The KAC Rail Mounted Anti-Cant Device is a simple, low profile tool that helps precision shooters ensure that their rifle is level before breaking a shot. It incorporates a small bubble level into an aluminum base that sits low enough to permit its use under most optics. Attaches to any M1913 Picatinny rail surface via a screw and clamp arrangement. En savoir plus
  3. 64009 : MKII Throw Lever Conversion Kit (Set of 2)
    49,52 $

    The New MK-II Lever® features a built-in precision adjustment wheel allowing finger tip (no tool) selection to desired tension to fit variations in 1913 Mil-Std Dimensions. The mounts adjustment wheel comes pre-gauged and locked to the center of the Mil-Std dovetail specs.

    En savoir plus
  4. 7855M : Universal Data Card Holder 30mm
    Warne Manufacturing Company
    7855M : Universal Data Card Holder 30mm
    97,93 $

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    En savoir plus
  5. 7856M : Universal Data Card Holder 34mm
    Warne Manufacturing Company
    7856M : Universal Data Card Holder 34mm
    97,93 $

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    En savoir plus
  6. 7857M : Universal Data Card Holder 35mm
    Warne Manufacturing Company
    7857M : Universal Data Card Holder 35mm
    97,93 $

    Universal Data Card Holder Easily attaches to the scope tube, in left or right configurations, for a universal fit. Data is displayed in a convenient location to make quick and accurate target transitions, and the articulating arm allows for low profile storage while not in use.

    En savoir plus
  7. 7899L : DATA CARD LABEL REFILLS - 50pk
    Warne Manufacturing Company
    7899L : DATA CARD LABEL REFILLS - 50pk
    18,36 $

    Data Card Label Refill Adhesive labels come in a 50 pack to replace when needed.

    En savoir plus
  8. 9-M6410 : Magnifier Riser Kit w/Screws
    29,17 $
    7mm riser plate with mount screws for EOTECH Gen 2 and Gen 3 magnifiers only. Does not fit Holographic Weapon Sights. This is a direct factory replacement accessory for G23 and G33 magnifier products. En savoir plus
  9. 9-XE2353-01 : EXPS2 Hood Service Kit BLK
    85,10 $
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world.
     
    The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied.
     
    Compatible with EOTech HWS models: 511, 512, 551, and 552.
     
    Kit Includes:
    Hood
    Replacement Torx mounting screws En savoir plus
  10. 9-XE2354-01 : EXPS3 Hood Service Kit BLK
    85,10 $
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world. The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied. En savoir plus
  11. 9-XE2354-02 : EXPS3 Hood Service Kit TAN
    85,10 $
    EOTech, a division of L-3, delivers cutting edge technology and products in the fields of holographic sighting systems, tactical lasers, illuminators and thermal imaging equipment. EOTech provides high-quality battle-tested products to law enforcement and commercial markets around the world.
     
    The Replacement Hood Kit services lost or worn parts for select EOTech Holographic Weapon Sights. Includes protective hood and four 1/4" long T-15 Torx head screws with Loctite pre-applied.
     
    Compatible with EOTech HWS models: 511, 512, 551, and 552.
     
    Kit Includes:
    Hood
    Battery Cap En savoir plus
  12. A400 : Tripod adapter
    29,67 $

    This tripod adapter securely locks your binocular in place. For use with all PASSIONT binoculars.

    En savoir plus
  13. G30.FM : 3 power magnifier with quick disconnect mount  BLK
    390,65 $
    Providing shooters with the same great magnification properties as our battle-tested G33 Magnifier at less than half the cost, this new-for-2020 product features a quickdetach fixed mount for fast and simple mounting and unmounting behind an HWS. The G30 works with all EOTECH HWS models. WARNING: California`s Proposition 65 En savoir plus
  14. G45.STS : 5 power magnifier with quick disconnect, switch to side (STS) mount  BLK
    838,37 $
    The mini 5X Magnifier has the similar weight and dimensional properties as the G45.STS existing G33 Magnifier, but with an additional 2X magnification for precision aiming at greater distances. The mount provides fast transitioning from 5X to 1X and the optic offers tool-free vertical and horizontal adjustments with a large field-of-view. The G45 works with all EOTECH HWS models. En savoir plus
  15. GA-0005T-1 : WL-GAT™ Surefire 300 Ultra - CSAT Weapon Light Glass Assault Tool
    132,25 $
    The GAT allows operators to rapidly (and effortlessly) breach glass and gain access to high-risk environments while keeping both hands on their primary weapon platform with no effect to the weapon's zero or combat readiness En savoir plus
  16. SI-REX : Reflex Exoskeleton
    80,27 $
    Compact, lightweight, and rugged, the Reflex Exoskeleton provides extreme protection for a wide variety of reflex optics. The patent pending Universal Mounting Pattern enables users to attach various optics of their choice. Included mounting posts securely hold your optic firmly in place. The shield is precision cut and made from steel with a QPQ black finish while the universal mount is hard anodized black. Included with the Exoskeleton, is a lightweight, low profile Picatinny mount that can be used stand alone to save weight. Combined, they offer the highest degree of protection from impacts and shock. At just over 2.5 oz total, the Strike REX is a low-profile, minimalist, must-have accessory for your reflex optics. En savoir plus
  17. SV1290 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  18. SV1360 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  19. SV1600 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  20. SV164-167 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  21. SV1650 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  22. SV167-171 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  23. SV1762 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  24. SV177-181 : Warne Switchview, Scope Quick Adjustment Levers
    82,70 $

    The New SwitchViewT by Warne Scope Mounts enables quick and easy adjustment of a scope's power setting with a simple push or pull of the lever. Simply clamp it around the zoom ring of a variable power scope, and the extended arm gives the proper leverage to turn a stiff power selector ring, or to rapidly move from high to low power and vice versa.

    En savoir plus
  25. USL1 : Warne Universal Scope Level, 1 inch
    122,41 $

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    En savoir plus
  26. USL30 : Warne Universal Scope Level, 30mm
    122,41 $

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    En savoir plus
  27. USL34 : Warne Universal Scope Level, 34mm
    122,41 $

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    En savoir plus
  28. USL35 : Warne Universal Scope Level, 35mm
    122,41 $

    The Warne Universal Scope Level was built to function as the ideally suited approach for shooters to boost their scopes. An effective piece of riflescope equipment will make an excellent addition to the scopes of shooters, and thanks to the Warne Universal Scope Level, receiving a superior piece of scope equipment hasn"t ever been easier.

    En savoir plus
Afficher en Liste Grille

Produits 1-50 sur 52

Page
par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2017 Boutique Agence Gravel. Tous droits réservés.