Firearms

Shop By
View as List Grid

Items 1-50 of 79

Page
per page
Set Descending Direction
In Stock
  1. 18610 : Shotgun 1100™/11-87™ 12Ga Stock & Fore-end Black Synthetic with SuperCell™ recoil pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  2. 19258 : Gas System Kit - 1100™/1187™ Piston - Piston Seal & 3 Barrel Seals N/A
    • Genuine factory replacement parts
    • Stainless steel piston/piston seal
    • Teflon-coated barrel seals
    • Fits all Model 1100T and 11-87T 12Ga Shotguns
    Learn More
  3. 19264 : Barrel Seal / O-Ring - 3 Pack N/A rubber

    The only fitting choice for your Remington shotgun.Whether you want your Remington shotgun to perform like two, or you’re restoring “an old friend,” never compromise on our superb craftsmanship and dependability.

    Learn More
  4. This Remington Universal Magazine Cap with Swivel Stud quickly and conveniently replaces your existing magazine cap, easily converting your Remington Shotgun to accept a sling. Fits all Pre-2010 Remington Model 870, 1100, and 11-87 12 & 16 gauge shotguns. Rear swivel stud screws right into the butt of the shotgun"s stock.

    Learn More
  5. 19471 : SuperCell™ Recoil Pad Shotguns with Wood Stocks Black Cellular Polyurethane
    $28.79

    The world's most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870T generate up to 54% less recoil than our leading competitors' autoloading shotguns with factory pads. Its millions of tiny SuperCellT absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCellT recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870T produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCellT technology is the product of 10 years' rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCellT, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a "kick" to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that's extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we've pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCellT, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCellT era.

    Learn More
  6. 19472 : SuperCell™ Recoil Pad Shotguns with Synthetic Stocks Black Cellular Polyurethane
    $28.79

    The world’s most effective recoil pad. So potent, in fact, it single-handedly helped our Model 870™ generate up to 54% less recoil than our leading competitors’ autoloading shotguns with factory pads. Its millions of tiny SuperCell™ absorb and release energy over a longer time period to create a more comfortable shooting experience than was ever before possible with conventional materials.

    The SuperCell™ recoil pad will single-handedly revolutionize the shooting sports. Its development marks the beginning of a new era in which a pump-action Model 870™ produces up to 54% less recoil force than competing autoloaders. Where high-velocity magnum rifles become mild, and introducing new shooters to our sport is smoother and less intimidating. A time of better first shots, and faster second and third shots.

    SuperCell™ technology is the product of 10 years’ rigorous R&D by the top recoil-suppression experts in the industry. Using a complex matrix of millions of SuperCell™, this advanced polymer construction harnesses and releases energy over a much longer time period. Rearward force of your gun is reduced from a “kick” to a gentle push and muzzle travel is diminished, resulting in the softest shooting experience possible. All from a pad that’s extremely lightweight, durable and enhanced with a smooth surface for rapid gun mounting.

    For more than 200 years, we’ve pioneered better shooting through improved recoil reduction. Beginning in 1885 with rubber pads, vented pads in 1948, TPE (thermoplastic elastomer) pads in 1987, and now with SuperCell™, an entirely new technology that will forever change the way recoil is harnessed.

    Welcome to the SuperCell™ era.

    Learn More
  7. 19481 : Adjustable Length Of Pull Spacer Kit Black
    $17.25

    Now standard on all Compact shotguns, our new Adjustable Length of Pull System makes it simple to tailor the fit of your firearm - all the way up to standard size. This system allows the LOP to grow with youngsters and be modified to the precise specification of all shooters of smaller stature. A total 1" of adjustment brings Compact buttstocks (1" shorter LOP than standard) up to standard size in 1/4" and 1/2" increments.

    It's also available as an accessory for use on other Remington firearms.

    Learn More
  8. 19485 : Shotgun 1100™/11-87™ 12Ga Monte Carlo Stock & Fore-end Black Synthetic with SuperCell R Pad

    Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

    Learn More
  9. 19548 : Shotgun 1100™/11-87™ ShurShot® 12Ga Stock & Fore-end Black Synthetic with SuperCell™ R Pad

    The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

    Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

    The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

    Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

    Learn More
  10. 4256-BK : ERGO Short M-LOK Mossberg 500/590 Tri Rail

    M-LOK forend for Mossberg 500/590 SHOCKWAVE
    M-LOK rails at 3, 6, and 9 o’clock
    Extremely light-weight and low profile.
    Hard Black type III anodized 6061-T6 Aluminum

    Learn More
  11. 4454 : Tactical Stock Adapter Mossberg 500®
    Use the Ergo Grip Tactical Stock Adaptor to install AR-15 type stocks and pistol grips on your Remington 870 or Mossberg 500/590 shotguns. Learn More
  12. 4456 : Stock Adapter Mossberg 500/590 - .410 gauge

    Use the ERGO .410 GA Shotgun Stock Adapter to install AR style stocks and pistol grips on your Mossberg 590. Will fit with a pistol arm brace on the SHOCKWAVE and accommodates mil spec or commercial buffer tubes.

    Learn More
  13. 4763-BK : ERGO 5-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum.

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend

    Learn More
  14. 4764-BK : ERGO 8-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend

    Learn More
  15. 4765-BK : ERGO 10-Slot KeyMod™ Aluminum U.M.P. Picatinny Rail (2 Mounting Holes) - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend.

    Learn More
  16. 4766-BK : ERGO 5-Slot KeyMod™ Aluminum LoPro Cantilever U.M.P. Picatinny Rail - Black

    Use your Picatinny accessories on your KeyModT handgaurds with this conversion system.

    The outside is a Picatinny rail. The inside is the mounting system to the KeyModT handguard.

    Hard anodized finish on 6061 T6 Aluminum

    *Compatible with #4238-BK Mossberg Shotgun KeyModT Forend.

    Learn More
  17. 4865 : ERGO Trirail Forend Standard Length Mossberg 500/590 6 15/16 Lenght - Black

    ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

    Learn More
  18. 4865-SHORT : ERGO Trirail Forend Mossberg 500/590 5 13/16 Length - Black

    ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

    Learn More
  19. 4872 : ERGO Standard M-LOK Length Mossberg 500/590 Forend

    M-LOK forend for Mossberg 500/590
    M-LOK rails at 3, 6, and 9 o'clock
    Extremely light-weight and low profile.
    6 15/16? LENGTH
    Hard Black type III anodized 6061-T6 Aluminum

    Learn More
  20. 4969-MOSS : ERGO Double Sling Loop Shotgun End Plate Mossberg 500/590 Ambidextrous Black

    The ERGO Double Sling Loop Shotgun End Plate provides Mossberg 500/590 shooters with an ambidextrous sling point. If used with a pistol grip stock a longer screw may be needed.

    Learn More
  21. 90070 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch LoP, soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  22. 90080 : Urbino® Pistol Grip Stock Remington® 870™, 1100™, 11-87™ Riser, Standard Butt. 12Ga - Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  23. 90210 : SureShell® Carrier for Remington 6 Shell 12Ga Left Side

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  24. 90320 : SureShell® Carrier for Remington 4-Shell 12Ga Left Side

    SureShell shotshell carriers are available in three configurations: four-shell, six-shell and eight-shell. The six-shell and eight-shell configurations can be installed on the left side of the receiver, while the four-shell carriers can be installed on either side of the receiver. Carriers can also be installed pointed back toward the stock.

    Learn More
  25. 90390 : SureShell® Carrier for Mossberg 500 6 Shell 12Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  26. 90420 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 8 Shell 12Ga Left side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  27. 90580 : SureShell® Aluminum Carrier for Remington® 870™/1100™/11-87™ (2-Shot 12Ga Left Side)

    Mesa Tactical Lightweight aluminum shotshell holder attaches to the left side of the shotgun receiver.

    Learn More
  28. 90860 : Trigger Pin Replacement Kit for Remington® 870/1100/1187

    The trigger pin replacement kits, also known as "anti-walk" pins, can be installed in Remington 870/1100/1187 shotguns to secure the trigger pins in place. These kits are incompatible with receiver mounted SureShell carriers or side Picatinny rails.

    Learn More
  29. 91070 : LEO Gen II Telescoping Hydraulic Recoil Stock Kit for Beretta 1301 (12-GA)

    Adapts AR-15 style butt stocks and pistol grips for use with Beretta 1301 semi-automatic shotguns to gives the shotgun similar handling characteristics to the AR-15. Our complete stock kits include the aluminum AR adapter; Hogue rubber overmolded grip; US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly; and all necessary assembly hardware and instructions. The optional recoil buffer can absorb felt recoil by up to 70%.

    Learn More
  30. 91260 : LEO® Telescoping Stock Kit for Remington 870™ 12Ga

    Adapts AR-15 style butt stocks and pistol grips for use with Remington 870 and Mossberg 500/590 shotguns to gives the shotguns similar handling characteristics to the AR-15.

    Our complete stock kits include the aluminum AR adapter, Hogue rubber overmolded grip, US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly and all necessary assembly hardware and instructions.

    Learn More
  31. 91520 : Pocket Push Button Sling Mount for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  32. 91530 : Pocket Ambi Push Button Sling Mount for Urbino® Stock for Remington® 870™,1100™, 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  33. 91540 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Limbsaver 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  34. 91550 : Urbino® Pistol Grip Stock for Remington® 870™, 1100™, 11-87™ Riser. Limbsaver. 12Ga Black

    Mesa Tactical"s Urbino pistol grip stock for is a fixed-length pistol grip shotgun stock made from injection-molded glass-filled nylon.

    The rugged Urbino Tactical stock features a 12 1/2 inch length of pull (LoP), soft urethane rubber grip, optional Limbsaver® butt pad, optional adjustable cheek riser and a variety of flexible sling mounting options.

    Learn More
  35. 91570 : Pocket Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  36. 91600 : Pocket Ambi Sling Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  37. 91610 : Pocket Ambi Hook Loop for Urbino® Stock for Remington 870™, 1100™ & 11-87™ 12Ga

    The Urbino Tactical stock system features a molded pocket at the front where the stock meets the shotgun receiver. A nylon blank is provide to fill this pocket, but it can also accept any of several stamped steel Sling Loops, Hook Loops or Push Button Sling Swivel mounts.

    Learn More
  38. 91800 : Rear Hook Loop for Urbino® Stock for Remington® Semi-auto 1100™, 11-87™ 12Ga

    The Urbino Tactical stock features a Benelli-style rear sling plate for installation of two-point slings. The installation of this component is entirely optional. Unlike the Benelli version, the Mesa Tactical Urbino Tactical stock sling plate accepts US military standard 1¼ inch sling webbing.

    Learn More
  39. 92280 : High-tube® Telescoping Recoil Stock & Adapter Rail for Mossberg 500 9" rail

    High-tube adapters have a comb height equivalent to an AR-15 and require an optics rail (included). High tube adapters allow proper cheek weld and eye alignment with popular optics such as an ACOG or Leupold CQT and others. Our complete stock kits include the aluminum AR adapter; Hogue rubber overmolded grip; US-made mil-spec six-position M4 SOPMOD style telescoping stock assembly; and all necessary assembly hardware and instructions.

    Learn More
  40. 92620 : Hook & Loop SureShell Mount for Moss 500 (6-Shell, 12-GA)

    NOTE: these Hook & Loop Mount kits do not include the Hook & Loop SureShell carriers, which are sold separately.

    While Mesa Tactical's development focus has long been on the needs of the professional tactical operator, we have nonetheless enjoyed some acceptance in the tactical competition community, especially Three Gun.  In response to a long expressed desire from Three Gun competitors for a quick-release version of our popular on-gun shell carriers, we've introduced Hook & Loop SureShell carriers.

    Hook & Loop SureShell carriers combine our SureShell Polymer carrier yoke with 3M SJ3572 hook fastener material laminated to a 3/32? Formex 94 substrate.  This allows Hook & Loop SureShell carriers to be easily attached to and removed from surfaces, such as shotgun receivers and MOLLE vests, covered with mating loop material.

    The Hook & Loop SureShell carriers are sold with adhesive backed 3M SJ3571 loop fastener that can be glued directly to a shotgun receiver.  For Three Gun competitors who do not want to permanently affix the loop fastener material to their shotguns, we also offer loop fastener bracket kits that are attached mechanically and can be easily removed at any time.

    Learn More
  41. 93240 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 4 Shell 20Ga Left Side Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  42. 93250 : SureShell® Carrier for Remington 870™, 1100™ & 11-87™ 6 Shell 20Ga Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  43. 93260 : SureShell® Carrier for Remington® 870™, 1100™, 11-87™ 8-Shell 20Ga - Black

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
  44. 93330 : Receiver-back Ambi Hook Loop for Remington® Shotgun

    Our innovative Sling and Hook Loops provide a way to securely attach a tactical sling directly to the shotgun receiver. They are excellent solutions for single-point slings, or for the receiver end attachment of three-point slings. The can be employed as alternatives to Burnsed loops or other attachment methods that are incompatible with custom stocks. In addition to sling mounts replacing the rear trigger pin, we also offer a limited line of hook loops that mount behind the Remington 870 receiver, between the receiver and the factory stock. These were produced at the request of a large US Federal enforcement agency. Unlike similar designs, the Mesa Tactical hook loops are machined from 1018 carbon steel, then given a mil-spec manganese phosphate finish. Some fitting with a file may be required.

    Learn More
  45. 93620 : SureShell® Carrier and Rail for Mossberg 500 4 Shell 12Ga 4.5" rail black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  46. 93630 : SureShell® Carrier and Rail for Mossberg 500 6 Shell 12Ga 4.5" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  47. 93640 : SureShell® Carrier and Rail for Mossberg 500 8 Shell 12Ga 4.5" rail Black

    Mesa Tactical SureShell Aluminum Shotshell Carriers with Rail combine a shell carrier with a MIL-STD-1913 (NATO STANAG 4694) Picatinny rail that accepts optical, sights, lasers or accessories. These shotshell carrier/rail systems mounts by using the drilled and tapped holes on top of the shotgun's receiver.

    Learn More
  48. 94740 : SureShell® Polymer Carrier for Remington® (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
  49. 94750 : SureShell® Polymer Carrier for Mossberg 500/590 & Maverick 88® (6-Shell 12Ga) - Black

    SureShell Polymer Carriers are injection molded from glass filled polymer, secured to the receiver by a lightweight aluminum back plate with brass threaded inserts. Available only in a six-shell configuration, the polymer carrier also includes an innovative dual rubber friction system that reliably holds shotshells in place. Models are available with and without integral Picatinny rails for mounting optics.

    Learn More
  50. 95160 : SureShell® Aluminum Carrier for Mossberg 500/590 & Maverick 88® (4-Shell 20Ga) Left S - Blk

    Shell holder carriers are milled from 6061-T6 aircraft aluminum, then bead blasted and mil-spec hard anodized for a rugged non-glare finish. They are secured to application-specific brackets, and include high temperature adhesive-backed die-cut rubber gaskets to protect the host shotgun's finish.

    Learn More
View as List Grid

Items 1-50 of 79

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.