Bipods

Afficher en Liste Grille

49 articles

par page
Par ordre décroissant
En stock
  1. 1A2-25 : Solid Base 12-25"

    Versatile, sturdy, light, fast. Time-proven design. Quality manufactured w/heat-treated steel & hard alloys. Black anodized finish. Quick-detachable. Model BR: Lowest bipod. Most useful for shooting off the bench. Pistol shooters favorite. Model L: Compact & light. For prone position or bench rest. Model H: For prone or sitting shooting, best for varmint shooting. Model 25: Some may be more comfortable in prone position. From sitting, extra height allows more leeway in shooting at an elevated target. Most versatile of the tall rests. Model 25C: Tallest of the series. May be better suited for unusually tall or heavy men. NOTE: "S" models rotate to either side for instant leveling on uneven ground.

    Model is for BR
    Series Ultralight Bipods
    Description Bipods

    En savoir plus
  2. 1A2-25C : Solid Base 13.5-27"

    Extends from 13 1/2" to 27" Fixed, Ultralight, 100% made in the USA.

    Black anodized

    En savoir plus
  3. 1A2-25C Camo : Krptek Highlander 131/2-27"
    • Extends from 13 1/2 inches to 27 inches
    • Harris Engineering 1A2-BRM Solid Base 13 1/2 - 27-Inch BiPod
    En savoir plus
  4. 1A2-BR : Solid Base 6-9"

    Versatile, sturdy, light, fast. Time-proven design. Quality manufactured W/Heat-Treated steel & hard alloys. Black anodized finish. Quick-detachable. BR-1A2 br: lowest Bipod. Most useful for shooting off the bench. Pistol shooters favorite. BR-1A2 L: compact & light. For prone position or benchrest. BR-1A2 h: for prone or sitting shooting, best for varmint shooting.model 25: some may be more comfortable in prone positoin. From sitting, extra height allows more leeway in shooting at an elevated target. Most versatile of the tall rests. BR-1A2 25c: tallest of the Series. May be better suited for unusually tall or heavy men. Note: "s" models rotate to either side for instant leveling on uneven ground.

    This Bipod is most Useful For Shooting Off The Bench

    En savoir plus
  5. 1A2-BR2 : Rotate Self Level 6-9"
    • Extends from 6 inches to 9 inches
    • Harris Engineering 1A2-BRM Solid Base 6 - 9-Inch BiPod
    En savoir plus
  6. 1A2-BRM : Notch Solid Base 6-9"

    The 1A2-BRM lm Harris Bipod is an improved version of the original leg notch Bipod. The legs eject by spring action. Four height settings from 6 to 9 inches. Weight is 10 ounces.

    The legs eject by spring action
    Four height settings from 6 to 9 inches
    Weight is 10 ounces

    En savoir plus
  7. 1A2-H : Solid Base 131/2-23"

    Versatile, sturdy, light and fast. Made from high strength anodized aluminum alloy. Stressed parts are tempered spring steel. Bipods clamp to most Q.D. stud-equipped bolt action rifles and have sling attachment provision and adjustment foroff-center stud.

    versatile, sturdy, light and fast
    made from high strength anodized aluminum alloy
    stressed parts are tempered spring steel
    bipods clamp to most Q.D. stud-equpped bolt action rifles and have sling attachment probision and adjustment foroff center stud
    spring loaded folding legs are quickly adjustable for height

    En savoir plus
  8. 1A2-L : Solid Base 9-13"

    The World"S Largest Selling Commercial Rifle Rest. For Prone Position Or Benchrest. Compact And Light. You Won"T Know It"S On The Gun Until You Need It. Barrel Height From 9 To 13 Inches.

    versatile, sturdy, light and fast
    made from high strength anodized aluminum alloy
    stressed parts are tempered spring steel
    bipods clamp to most Q.D. stud-equpped bolt action rifles and have sling attachment probision and adjustment foroff center stud
    spring loaded folding legs are quickly adjustable for height

    En savoir plus
  9. 1A2-LM : Notch Solid Base 9-13

    Versatile, sturdy, light, fast. Time-proven design. Quality manufactured W/Heat-Treated steel & hard alloys. Black anodized finish. Quick-detachable. LM-1A2 br: lowest Bipod. Most useful for shooting off the bench. Pistol shooters favorite. LM-1A2 L: compact & light. For prone position or benchrest. LM-1A2 h: for prone or sitting shooting, best for varmint shooting.model 25: some may be more comfortable in prone positoin. From sitting, extra height allows more leeway in shooting at an elevated target. Most versatile of the tall rests. LM-1A2 25c: tallest of the Series. May be better suited for unusually tall or heavy men. Note: "s" models rotate to either side for instant leveling on uneven ground.

    The legs eject by spring action
    Seven height settings from 9 to 13 inches
    Weight is 11 ounces

    En savoir plus
  10. 7901M : Precision Bipod
    Warne Manufacturing Company
    7901M : Precision Bipod

    The Warne® Skyline™ Precision Bipod is the most functional, ergonomic and strongest bipod on the market today. Designed to attach to your picatinny rail, the Skyline bipod allows the shooter to make quick, one-handed height adjustments, as well as smooth cant and panning ability for use on uneven terrain or less than ideal positions.  The Skyline bipod is made from 6061 T6 & 7075 T6 aircraft-grade aluminum with steel components in high stress/hard use areas. Look for Warne’s complete line of Skyline Precision Shooting Accessories at your favorite retailer.

    En savoir plus
  11. 7902M : Precision Bipod, Arca Rail Interface

    The Warne Skyline Precision Bipod is the most functional, ergonomic and strongest bipod on the market today. Designed to attach to your ARCA rail, the Skyline bipod allows the shooter to make quick, one-handed height adjustments, as well as smooth cant and panning ability for use on uneven terrain or less than ideal positions. The Skyline bipod is made from 6061 T6 and 7075 T8 aircraft-grade aluminum with steel components in high stress/hard use areas. Panning movement can also be disabled, allowing on cant if desired.

    En savoir plus
  12. 7950M : Precision Bipod - Spike Foot
    Warne Manufacturing Company
    7950M : Precision Bipod - Spike Foot

    Warne Skyline™ Spike feet are an economical and effective way to upgrade your Warne Precision Bipod. Our spike feet are designed to increase the amount of grip on most shooting surfaces allowing you to load the bipod before the shot and reduce bipod hop during recoil. If you’re looking for enhanced recoil management and keeping the reticle on target for quicker follow up shots, try this upgrade next time you’re on the range.

    En savoir plus
  13. 7951M : Precision Bipod - Claw Foot
    Warne Manufacturing Company
    7951M : Precision Bipod - Claw Foot

    Warne Skyline™ Claw feet give you the additional floatation needed for stable shooting on loose or loamy surfaces where ordinary feet would sink in. Designed to fit Warne’s Skyline Precision Bipod, the feet articulate to accommodate different leg angles to maximize contact on uneven terrain.

    En savoir plus
  14. 7954M : Precision Bipod - Atlas® Foot Adapter

    Warne Scope Mounts Skyline Atlas Foot Adapter, Black Finish, Fits Warne Precision Bipod 7954m

    En savoir plus
  15. MAG1075-BLK : Magpul® Bipod – Sling Stud QD

    Product Details
    The Magpul Bipod – Sling Stud QD is the next offering in the Magpul bipod line. Designed to mount on the Uncle Mike’s® Sling Swivel Stud found on most sporting rifles, the Magpul Bipod – Sling Stud QD is the strongest, most fully featured bipod available with direct sling stud mounting capability.

    The stainless-steel mounting system self-locates and aligns perfectly every time, and an ergonomic thumb wheel allows for excellent grip to ensure easy tightening. Additionally, two sizes of non-marring, high-durometer rubber mounting gaskets are provided to ensure optimized fit and load distribution on narrow sporter-contour or wider target-style forends. The ability to mount a sling with standard locking sling swivels on the forend is maintained with a low-profile sling stud on the rear of the Sling Stud QD mount, which also provides for a quick detachment when it’s needed.

    Durable & Lightweight

    Like our other bipods, Magpul Bipod – Sling Stud QD is exceptionally strong and built to perform under punishing field conditions.  The Sling Stud QD bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 13 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend almost 3.5", from 6.6" to 10.0" in length. An industry-exclusive 50° of total tilt (+/- 25 degrees on either side) is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

    Streamlined in Design and Execution

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.5” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Sling Stud QD bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Sling Stud QD bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

    The Magpul Bipod – Sling Stud QD is available in BLK or FDE colors.

    Made in the U.S.A.

    En savoir plus
  16. MAG1075-FDE : Magpul® Bipod – Sling Stud QD

    Product Details
    The Magpul Bipod – Sling Stud QD is the next offering in the Magpul bipod line. Designed to mount on the Uncle Mike’s® Sling Swivel Stud found on most sporting rifles, the Magpul Bipod – Sling Stud QD is the strongest, most fully featured bipod available with direct sling stud mounting capability.

    The stainless-steel mounting system self-locates and aligns perfectly every time, and an ergonomic thumb wheel allows for excellent grip to ensure easy tightening. Additionally, two sizes of non-marring, high-durometer rubber mounting gaskets are provided to ensure optimized fit and load distribution on narrow sporter-contour or wider target-style forends. The ability to mount a sling with standard locking sling swivels on the forend is maintained with a low-profile sling stud on the rear of the Sling Stud QD mount, which also provides for a quick detachment when it’s needed.

    Durable & Lightweight

    Like our other bipods, Magpul Bipod – Sling Stud QD is exceptionally strong and built to perform under punishing field conditions.  The Sling Stud QD bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 13 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend almost 3.5", from 6.6" to 10.0" in length. An industry-exclusive 50° of total tilt (+/- 25 degrees on either side) is controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots.

    Streamlined in Design and Execution

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.5” deep and 3.3” wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Sling Stud QD bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Sling Stud QD bipod’s legs accept most Atlas pattern bipod replaceable feet, except for the Atlas 5-H style.

    The Magpul Bipod – Sling Stud QD is available in BLK or FDE colors.

    Made in the U.S.A.

    En savoir plus
  17. MAG933-BLK : Magpul® Bipod for M-LOK® - Black

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  18. MAG933-FDE : Magpul® Bipod for M-LOK® - Flat Dark Earth

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  19. MAG941-BLK : Magpul® Bipod for 1913 Picatinny Rail - Black

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  20. MAG941-FDE : Magpul® Bipod for 1913 Picatinny Rail - Flat Dark Earth

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  21. MAG951-BLK : Magpul® Bipod for A.R.M.S.® 17S Style - Black

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  22. MAG951-FDE : Magpul® Bipod for A.R.M.S.® 17S Style - Flat Dark Earth

    The Magpul Bipod offers serious strength and versatility at a price that provides unmatched value. Rich with important features, our lightweight Mil-spec hard anodized 6061 T-6 aluminum and injection-molded polymer bipod brings innovation in ergonomics, functionality, strength and value together. An aesthetically pleasing, low-profile design conceals its mechanisms and hardware, smoothly brushing off snags and bumps. Optimized for rapid one-handed adjustments, the bipod quickly and quietly transitions between countless user configurations. The Magpul Bipod includes many features normally found on bipods at a significantly higher cost.

    Durable & Lightweight

    The Magpul Bipod is exceptionally strong and built to perform under punishing field conditions.  Like all Magpul products, the Bipod is constructed of rugged, high-strength materials and designed to last a lifetime. In the shooting position, it is easily loaded with stabilizing forward tension without fear of failure or warping. Mil-spec hard anodized 6061 T-6 aluminum, stainless steel internals, and injection-molded reinforced polymer ensure years of dependable performance and reliability, all while shaving weight. At just over 11 oz., the Magpul Bipod is lighter than many pricier bipods currently on the market.

    Innovative, Adjustable, & Easy to Use

    Deploying and adjusting the Magpul Bipod is quick and easy. Spring-tensioned legs stow neatly forward and snap down and lock into place with one hand. Leg extensions slide and lock securely with the push of a button on any of the seven half-inch spaced locking detents. The legs extend a full four inches, from 6.3" to 10.3". An industry-exclusive 50° of total tilt and 40° of total pan are controlled by a glove-friendly knurled tool-less bipod locking knob located between the extended legs, allowing easy adjustment between shots. Additionally, the Magpul Bipod has the exclusive ability to lock pan at 0° while maintaining full tilt functionality.

    Smooth & Unobtrusive

    From the drawing board, the Magpul Bipod was designed to be barely noticed until needed. Folded, the streamlined housing and legs fit neatly under the barrel and are just under 2.3" deep and 3.3" wide. In addition, anodized surfaces and tight, precision tolerances mitigate squeaks and rattles.

    Functional Feet

    The Magpul Bipod has many features that are also useful even when it is in the stowed position. A soft rubber bipod locking knob cap is attached to the locking knob gives users a steady, non-marring forward rest while the bipod is folded. Additionally, its staggered soft rubber feet hold fast on a variety of shooting surfaces and are easily removed with a roll pin punch. Should users choose to change feet, the Magpul Bipod's legs accept all Atlas pattern bipod replaceable feet.

    The Magpul Bipod is available in three popular mounting platforms: M-LOK ® (MAG933), 1913 Picatinny Rail (MAG941), and A.R.M.S® 17S Style (MAG951), and is available in BLK or FDE colors. The Bipod for A.R.M.S.®17S Style must be used in conjunction with an appropriate 17S-style mounting device that is purchased separately and typically is quick-detach capable, for proper mounting to your weapon system of choice

    En savoir plus
  23. S-25 : Rotate 12-25"

    Extends from 12" to 25" (Swivels) standard legs
    Ultralight weights 20 oz.
    Extends from 12" to 25"
    Adjustable legs with spring return.
    Swivels (tilts) to compensate for uneven terrain.
    3 piece legs.
    Has a built in sling swivel stud to attach the sling.
    100% Made in the USA.

    En savoir plus
  24. S-25C : Rotate 13.5-27"
    Ultralight weights 22.5 oz.
    Extends from 13 1/2" to 27"
    Adjustable legs with spring return.
    Swivels (tilts) to compensate for uneven terrain.
    3 piece legs.
    Has a built in sling swivel stud to attach the sling.
    100% Made in the USA. En savoir plus
  25. S-25C Camo : Krptek Highlander 13.5-27"
    • Ultralight weights 19.5 oz.
    • Extends from 13 1/2" to 27"
    • Adjustable legs with spring return.
    • 3 piece legs.
    • Swivels (tilts).
    • 100% Made in the USA.
    En savoir plus
  26. S-BR : Rotate 6-9"

    Extends from 6" to 9" Standard legs (Swivels)
    Ultralight weights13 oz.
    Extends from 6" to 9"
    Swivels (tilts) to compensate for uneven terrain.
    Has a built in sling swivel stud to attach the sling.
    100% Made in the USA

    En savoir plus
  27. S-BR2 : Rotate Self Leveling 6-9"
    • Extends from 6 inches to 9 inches
    • Harris Engineering 1A2-BRM Solid Base 6 - 9-Inch BiPod
    En savoir plus
  28. S-BRM : Notch Rotate 6-9"
    Ultralight weights13 oz.
    Extends from 6" to 9"
    Leg notches in 1" increments.
    Legs are spring loaded, for fast deployment.
    Swivels (tilts) to compensate for uneven terrain.
    Has a built in sling swivel stud to attach the sling.
    100% Made in the USA En savoir plus
  29. S-L : Rotate 9-13"

    Versatile, sturdy, light, fast. Time-proven design. Quality manufactured W/Heat-Treated steel & hard alloys. Black anodized finish. Quick-detachable. L-S br: lowest Bipod. Most useful for shooting off the bench. Pistol shooters favorite. L-S L: compact & light. For prone position or benchrest. L-S h: for prone or sitting shooting, best for varmint shooting.model 25: some may be more comfortable in prone positoin. From sitting, extra height allows more leeway in shooting at an elevated target. Most versatile of the tall rests. L-S 25c: tallest of the Series. May be better suited for unusually tall or heavy men. Note: "s" models rotate to either side for instant leveling on uneven ground.

    Ultra-light and lightning quick
    Folding legs have completely adjustable spring-return extensions
    The Sling swivel attaches to the clamp

    En savoir plus
  30. S-LM : Notch Rotate 9-13"
    • Ultralight weights14 oz.
    • Extends from 9" to 13"
    • Leg notches in 1" increments.
    • Legs are spring loaded, for fast deployment.
    • Swivels (tilts) to compensate for uneven terrain.
    • Has a built in sling swivel stud to attach the sling.
    • 100% Made in the USA
    En savoir plus
Afficher en Liste Grille

49 articles

par page
Par ordre décroissant
En stock
*Temps moyen de livraison estimé. Les délais peuvent varier selon les produits.
© 2021 Boutique Agence Gravel Défense. All Rights Reserved.