Crosses et fûts

For the ultimate in comfort and durability for your firearms, nothing but a Remington® replacement stock will do. Get yours in a fiberglass-  reinforced, watherproof, lightweight synthetic stock that will never bend or swell, or an handsome wood upgrade that’s tough as nails and easy on the eyes. Made in the USA.

For the ultimate in comfort and durability for your firearms, nothing but a Remington® replacement stock will do. Get yours in a fiberglass-  reinforced, watherproof, lightweight synthetic stock that will never bend or swell, or an handsome wood upgrade that’s tough as nails and easy on the eyes. Made in the USA.

For the ultimate in comfort and durability for your firearms, nothing but a Remington® replacement stock will do. Get yours in a fiberglass-  reinforced, watherproof, lightweight synthetic stock that will never bend or swell, or an handsome wood upgrade that’s tough as nails and easy on the eyes. Made in the USA.

Genuine Remington® synthetic Stocks and Fore-Ends are designed to fit, function, and last like the originals. Constructed of high-strength, lightweight, fiberglass-reinforced, synthetic material that will never bend or swell. Rear swivel stud attached for easy addition of sling with universal magazine cap installation. Recoil pad Included.

Les crosses et les fûts synthétiques d’origine de Remington® sont conçus pour s’ajuster, fonctionner et durer comme les originaux. Fabriqués d’un matériau synthétique léger mais résistant, renforcé de fibre de verre, ils ne plient pas et n’enflent pas. La grenadière arrière est installée pour permettre l’ajout d’une bretelle, nécessitant cependant le remplacement du bouchon du chargeur avec le modèle universel équipé de la grenadière avant. Le coussinet anti recul est inclus.

Les crosses et les fûts synthétiques d’origine de Remington® sont conçus pour s’ajuster, fonctionner et durer comme les originaux. Fabriqués d’un matériau synthétique léger mais résistant, renforcé de fibre de verre, ils ne plient pas et n’enflent pas. La grenadière arrière est installée pour permettre l’ajout d’une bretelle, nécessitant cependant le remplacement du bouchon du chargeur avec le modèle universel équipé de la grenadière avant. Le coussinet anti recul est inclus.

Les crosses et les fûts synthétiques d’origine de Remington® sont conçus pour s’ajuster, fonctionner et durer comme les originaux. Fabriqués d’un matériau synthétique léger mais résistant, renforcé de fibre de verre, ils ne plient pas et n’enflent pas. La grenadière arrière est installée pour permettre l’ajout d’une bretelle, nécessitant cependant le remplacement du bouchon du chargeur avec le modèle universel équipé de la grenadière avant. Le coussinet anti recul est inclus.

Les crosses et les fûts synthétiques d’origine de Remington® sont conçus pour s’ajuster, fonctionner et durer comme les originaux. Fabriqués d’un matériau synthétique léger mais résistant, renforcé de fibre de verre, ils ne plient pas et n’enflent pas. La grenadière arrière est installée pour permettre l’ajout d’une bretelle, nécessitant cependant le remplacement du bouchon du chargeur avec le modèle universel équipé de la grenadière avant. Le coussinet anti recul est inclus.

• Fits any 870 12GA shotgun
• Single piece construction for the utmost in felt and proven durability
• M-Lok compatible accessory slots for user customization and aftermarket uprgrades
• Beveled edges for a smooth ergonomic feel compared to competitive models
• Same easy installation as with any standard 870 fore-end
• Perfect option for consumers to upgrade their shotgun for style and usability

The Ultimate Fusion of Ambidextrous Freedom and Dead-Sure Stability.

Combining the best of thumbhole and pistol-grip designs, our new ShurShotT stock affords right- and left-handed shooters equally astounding levels of shooting comfort and rock-steady aim. It was developed to meet the demands of deer, turkey and predator hunts. Namely, increased maneuverability and extended-range precision.

The natural, ergonomic pistol grip optimizes pointability and works in conjunction with the revolutionary new SuperCellT recoil pad to cancel felt recoil for more accurate first shots and faster follow-ups. Its an ultra-lightweight design and the comb is specially contoured for rapid eye alignment with your sights or scope.

Proving to be one of the most lethal developments in shotgun technology since the 3 1/2 12 gauge chambering, the new ShurShotT stock is redefining lethal range and handling ease.

Une combinaison ultime de choix ambidextre et de stabilité absolue.

En mariant les meilleures caractéristiques du repose-pouce et de la poignée-pistolet, notre nouvelle crosse ShurShot™ offre aux droitiers, tout comme aux gauchers, des niveaux surprenants de confort dans le tir et de stabilité dans la visée. Elle a été développée pour répondre aux critères des chasses au cerf, au dindon et aux prédateurs, c’est-à-dire une maniabilité élevée et une précision à plus grande portée.

La poignée-pistolet ergonomique aux formes naturelles optimise le pointage de l’arme et travaille en conjonction avec le nouveau coussinet anti recul révolutionnaire SuperCell™pour amoindrir la perception du recul; ceci favorise la précision du premier coup et la rapidité des coups suivants. C’est une conception ultra légère avec le busc façonné pour favoriser l’alignement de l’œil avec les mires ou la lunette de tir.

Un développement des plus meurtriers dans la technologie des fusils depuis l’arrivée des munitions 3 1/2 du calibre 12, la nouvelle crosse ShurShot™a repoussé les limites de la portée et de la facilité de maniement.

Remington Model 700 Chassis with SquareDrop Handguard

• Keymod forend for Mossberg 500
• Keymod rails at 3, 6, and 9 o"clock
• Extremely light-weight and low profile
• Black anodized 6061-T6 Alum.

Keymod forend for Mossberg 500.
Keymod rails at 3, 6, and 9 o'clock
Extremely light-weight and low profile.
Hard Black type III anodized 6061-T6 Aluminum

M-LOK forend for Mossberg 500/590 SHOCKWAVE
M-LOK rails at 3, 6, and 9 o’clock
Extremely light-weight and low profile.
Hard Black type III anodized 6061-T6 Aluminum

M-LOK forend for Remington Tac-14 and all other Remington 870’s.
M-LOK rails at 3, 6, and 9 o’clock
Extremely light-weight and low profile.
Hard Black type III anodized 6061-T6 Aluminum

ERGO KEYMOD SUPERLITE™ MODULAR FREE FLOAT RAIL SYSTEM
WARNING

$91.00 – $227.00

The ERGO SuperLite™ Free Float Modular KeyMod Rail System provides a 1.8” outside diameter and a compact 1.37” inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction.

• 3″ Version
• 5″ Version
• 7″ Version Weighs 6.9 ounces
• 9″ Version Weighs 7.9 ounces
• 12″ Version Weighs 9.2 ounces
• 15″ Version Weighs 10.6 ounces

KeyMod slots are located at the 3, 6, and 9 o’clock positions allowing users to run with or without rail covers (4330-4PK).

Specifications:

• 6061 T6 Construction
• Type III Hard-coat Anodized Finish
• Lightweight one piece free float design
• KeyMod design accepts Ergo and all other KeyMod compatible accessories
• Full length, seamless Mil-Spec 1913 Picatinny top rail
• Scalloped Picatinny rail slots for comfort and style
• Sleek 1.8” outside diameter and a 1.37” inside diameter
• For AR-15/M16 platforms (Not AR-10, SR25, etc.)
• Available in 9″, 12”, and 15” lengths
• Made to VLTOR Weapons Systems KeyMod Specifications
• Made entirely in the USA.

ERGO KEYMOD SUPERLITE™ MODULAR FREE FLOAT RAIL SYSTEM
WARNING

$91.00 – $227.00

The ERGO SuperLite™ Free Float Modular KeyMod Rail System provides a 1.8” outside diameter and a compact 1.37” inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction.

• 3″ Version
• 5″ Version
• 7″ Version Weighs 6.9 ounces
• 9″ Version Weighs 7.9 ounces
• 12″ Version Weighs 9.2 ounces
• 15″ Version Weighs 10.6 ounces

KeyMod slots are located at the 3, 6, and 9 o’clock positions allowing users to run with or without rail covers (4330-4PK).

Specifications:

• 6061 T6 Construction
• Type III Hard-coat Anodized Finish
• Lightweight one piece free float design
• KeyMod design accepts Ergo and all other KeyMod compatible accessories
• Full length, seamless Mil-Spec 1913 Picatinny top rail
• Scalloped Picatinny rail slots for comfort and style
• Sleek 1.8” outside diameter and a 1.37” inside diameter
• For AR-15/M16 platforms (Not AR-10, SR25, etc.)
• Available in 9″, 12”, and 15” lengths
• Made to VLTOR Weapons Systems KeyMod Specifications
• Made entirely in the USA.

ERGO KEYMOD SUPERLITE™ MODULAR FREE FLOAT RAIL SYSTEM
WARNING

$91.00 – $227.00

The ERGO SuperLite™ Free Float Modular KeyMod Rail System provides a 1.8” outside diameter and a compact 1.37” inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction.

• 3″ Version
• 5″ Version
• 7″ Version Weighs 6.9 ounces
• 9″ Version Weighs 7.9 ounces
• 12″ Version Weighs 9.2 ounces
• 15″ Version Weighs 10.6 ounces

KeyMod slots are located at the 3, 6, and 9 o’clock positions allowing users to run with or without rail covers (4330-4PK).

Specifications:

• 6061 T6 Construction
• Type III Hard-coat Anodized Finish
• Lightweight one piece free float design
• KeyMod design accepts Ergo and all other KeyMod compatible accessories
• Full length, seamless Mil-Spec 1913 Picatinny top rail
• Scalloped Picatinny rail slots for comfort and style
• Sleek 1.8” outside diameter and a 1.37” inside diameter
• For AR-15/M16 platforms (Not AR-10, SR25, etc.)
• Available in 9″, 12”, and 15” lengths
• Made to VLTOR Weapons Systems KeyMod Specifications
• Made entirely in the USA.

ERGO KEYMOD SUPERLITE™ MODULAR FREE FLOAT RAIL SYSTEM
WARNING

$91.00 – $227.00

The ERGO SuperLite™ Free Float Modular KeyMod Rail System provides a 1.8” outside diameter and a compact 1.37” inside diameter designed to create a clean and sleek profile. Ventilation cutouts aid in rapid cooling, and provide substantial weight reduction.

• 3″ Version
• 5″ Version
• 7″ Version Weighs 6.9 ounces
• 9″ Version Weighs 7.9 ounces
• 12″ Version Weighs 9.2 ounces
• 15″ Version Weighs 10.6 ounces

KeyMod slots are located at the 3, 6, and 9 o’clock positions allowing users to run with or without rail covers (4330-4PK).

Specifications:

• 6061 T6 Construction
• Type III Hard-coat Anodized Finish
• Lightweight one piece free float design
• KeyMod design accepts Ergo and all other KeyMod compatible accessories
• Full length, seamless Mil-Spec 1913 Picatinny top rail
• Scalloped Picatinny rail slots for comfort and style
• Sleek 1.8” outside diameter and a 1.37” inside diameter
• For AR-15/M16 platforms (Not AR-10, SR25, etc.)
• Available in 9″, 12”, and 15” lengths
• Made to VLTOR Weapons Systems KeyMod Specifications
• Made entirely in the USA.

ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

ERGO Three Rail Shotgun Forend provides a Mossberg 500/590 shooters with a tri-rail mounting platform for their forend.

ERGO Three Rail Shotgun Forend provides Remington 870 shooters with a tri-rail mounting platform for their forend.

M-LOK forend for Mossberg 500/590
M-LOK rails at 3, 6, and 9 o'clock
Extremely light-weight and low profile.
6 15/16? LENGTH
Hard Black type III anodized 6061-T6 Aluminum

Adjustable stock for mil-spec tubes.

Integrated/angled/sloped cheek weld for shooting accuracy
Fits mil-spec tubes
Made from Reinforced Polymer that is impact/temperature/chemical resistant
Innovative low profile ambidextrous trigger
2-Web sling attachment points
QD attachment is included
Non-slip checkered back
Easy installation in seconds
Weigh less than 7 ounces
Matte anti-reflective finish

Adjustable stock for mil-spec tubes.

Integrated/angled/sloped cheek weld for shooting accuracy
Fits mil-spec tubes
Made from Reinforced Polymer that is impact/temperature/chemical resistant
Innovative low profile ambidextrous trigger
2-Web sling attachment points
QD attachment is included
Non-slip checkered back
Easy installation in seconds
Weigh less than 7 ounces
Matte anti-reflective finish

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

• Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
• Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
• Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
• Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
• Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
• 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
• Weight is only 1.3 pounds

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to. Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

• Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
• Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
• Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
• Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
• Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
• 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
• Weight is only 1.3 pounds

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

• Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
• Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
• Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
• Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
• Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
• 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
• Weight is only 1.3 pounds

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions. Includes an over-molded carbine length buffer tube, standard castle nut and ambidextrous sling plate.

• Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions
• Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to
• Includes an overmolded carbine length buffer tube, standard castle nut and ambidextrous sling plate
• Includes rubber-like recoil pad for enhanced comfort and secure, positive placement
• Includes 2 quick detach sling attachment points, 3 web sling attachment points and 2 sling hook attachment points
• 8 inches from receiver to butt plate when collapsed, 12 inches when fully extended
• Weight is only 1.3 pounds

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to.

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to.

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454

Eight position collapsible stock for AR style rifles and shotguns providing one of the longest length of pull on the market with a fixed cheek piece for a constant and repeatable cheek weld in any of the eight stock positions.

Once the butt is locked into position, the F93 has the feel of a fixed stock without the rattling and movement shooters are used to.

F93 Strike Plate available

*Dual use compatible with shotgun adapter #4453 and #4454