Bravo Company USA

• Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
• Optional high and low mounting position for the 1913 rail section.
• Fits most common 1913-rail pistol/weapon light systems
• Multiple mounting holes for ideal placement.
• Designed to mount on the 3 or 9 o'clock rail positions.
• Durable Aluminum construction. Intently designed to be low-profile and snag-free
• Patent Pending mounting system
• Minimal added weight, 0.9 oz.
• BCM US Patent Number 9,377,274

• Fully ambidextrous: made to mount flush or cantilever off either the left or right side of the rail system.
• Optional high and low mounting position for the 1913 rail section.
• Fits most common 1913-rail pistol/weapon light systems
• Multiple mounting holes for ideal placement.
• Designed to mount on the 3 or 9 o'clock rail positions.
• Durable Aluminum construction. Intently designed to be low-profile and snag-free
• Patent Pending mounting system
• Minimal added weight, 0.9 oz.

The A2XT is an extended version of the A2 flash hider found on the M16 and M4 series of rifles.

• Threaded 1/2"x 28 for your 5.56mm carbine.
• Machined from 4150 steel.
• Phosphate coated per MIL-STD-171.
• Predrilled hole at the base for permanent installation.

When mounted per BATF specifications for a permanent installation it will bring your 14.5" M4 barrel to a non-NFA length of over 16.1".

Installation should be done by a qualified gunsmith familiar with BATF regulations.

The A2XT is predrilled and comes with a dowel pin and crush washer for installation.
Made by Bravo Company MFG, Inc. (BCM®).

Stripped carrier is finished in an Ion Bonded Flat Dark Earth. Lowers friction and cleans easier.

BCM® (MPI) complete bolt carrier group is fully assembled. (BCG)

BCM® (MPI) complete bolt carrier group is fully assembled. (BCG)

Bolt carrier group (auto version) for your AR15, M16, or M4. Parkerized exterior and chrome lined inside carrier. Machined to USGI specifications. This M16/M4 carrier includes the proper Mil-Spec gas key. Gas key is chrome lined and heat treated per GI specifications. Gas key is secured to carrier via USGI domestic mfg Grade 8 fasteners and properly staked per Mil-Specs. These properly hardened parts insure a strong staking and proper gas system functioning.
The bolt assembly is machined from the correct Mil-Spec Carpenter No. 158® steel, shot peened for increased strength, includes tool steel machined extractor and ejector, BCM Extractor Spring, and is HPT (High Pressure Tested) and MPI (Magnetic Particle Inspected).

Prior to shipping, all BCM Bolt Carrier Groups are test fired for function. As such, the Bolt Carrier Group will show handling marks consistent with these quality control procedures.

This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include:

• BCM PNTT Trigger Assembly
• BCM Pistol Grip, Mod 3
• BCM Enhanced Trigger Guard

In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

BCM PNTT Trigger Assembly (Polished - Nickel - Teflon).

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

Bolt Catch and Safety Selector

The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

BCM Magazine Catch

The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.

The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

BCM Rear Takedown Pin and Front Pivot Pin

BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

BCM Detents and Springs

Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include:

• BCM PNTT Trigger Assembly
• BCM Pistol Grip, Mod 3
• BCM Enhanced Trigger Guard

In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

BCM PNTT Trigger Assembly (Polished - Nickel - Teflon).

BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.

The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.

After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

Polished

The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

Nickel

An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

Teflon

Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.

The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

Bolt Catch and Safety Selector

The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

BCM Magazine Catch

The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.

The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

BCM Rear Takedown Pin and Front Pivot Pin

BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

BCM Detents and Springs

Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;
 BCM PNTT Trigger Assembly
 BCM Pistol Grip, Mod 3
 BCM Enhanced Trigger Guard

In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

BCM PNTT Trigger Assembly (Polished - Nickel - Teflon)
BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.
The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.
After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

Polished
The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

Nickel
An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

Teflon
Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.
The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

Bolt Catch and Safety Selector
The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

BCM Magazine Catch
The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.
The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

BCM Rear Takedown Pin and Front Pivot Pin
BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

BCM Detents and Springs
Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

This kit includes all the Mil-Spec quality components you have come to expect from BCM, along with some fantastic upgrades to include;
 BCM PNTT Trigger Assembly
 BCM Pistol Grip, Mod 3
 BCM Enhanced Trigger Guard

In a commercial market flooded with imported and low quality Mil-Spec imitations, you can trust that BCM parts are made in the USA and to the highest standards. Please look at the information below.

BCM PNTT Trigger Assembly (Polished - Nickel - Teflon)
BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.
The BCM PNTT Trigger and PNTT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.
After that, the BCM PNTT Trigger and PNTT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product..

Polished
The sear engagement surfaces are ground, but then hand polished for an increased smoothness up to 300% beyond the Mil-Spec.

Nickel
An electroless nickel finish is applied for a smoother trigger pull with less 'grit' and reduced felt 'creep'. Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation.

Teflon
Teflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNTT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance.

This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.
The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset.
The processes and tolerances are matched in the BCM PNTT Trigger Assembly to create a system better than the sum of its parts.

Bolt Catch and Safety Selector
The BCM Bolt Catch and Safety Selector are a Mil-Spec AISI8620 investment casting per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market)
The Safety Selector is center-less ground. The Selector and Bolt Catch are machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. Has a phosphate finish for corrosion resistance.

BCM Magazine Catch
The BCM Magazine Catch Assembly (plate and the post) is precision machined Mil-Spec AISI8620 per the USGI TDP for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market) and a hardened alloy steel shaft.
The BCM Magazine Catch is machined to the Mil-Spec , then goes through a 3 step heat treat and case hardening process for optimal grain structure and wear resistance. The shaft is hardened, centerless ground, and precision threaded. Parts are assembled and staked per the USGI TDP and given a phosphate finish for corrosion resistance.

BCM Rear Takedown Pin and Front Pivot Pin
BCM Rear Takedown Pins and Front Pivot Pins are made from AISI8620 bar stock and machined per the USGI TDP for M16/M4 family of weapons. Our takedown pins are given a 3 step heat treat processes and the diameters are ground to final size prior to a corrosion resistant phosphate finish.

BCM Detents and Springs
Takedown detents include a cadmium chromate coating to resist corrosion and prevent them seizing in the small holes of the lower receiver while the Buffer retainer and Bolt Stop Plunger are made from hardened alloy steel for wear resistance and finished with a phosphate coating to prevent corrosion. The Springs are 17-7PH Stainless Steel to prevent corrosion and retain adequate tension for a lifetime of service.

• BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.
• Machined from steel, and easily accommodates staking.
• Like all BCM® products, Made with pride in the U.S.A.

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.

As with all BCM branded products, the highest quality is the primary focus. Our BCM Extractor Spring is manufactured by a 9001:2000 facility employing the latest precision equipment. BCM starts with only the highest quality chrome silicon material, heat treats to stress relieve the product and shot peens to add increased strength.

This kit also includes the new black extractor insert, standard on all M4, M4A1, Mk18 carbines and the recent new standard on M16A4 rifles. The BCM Extractor Spring is so strong the Mil-Spec Crane O-Ring will probably not be needed, but it is included.

This kit includes:

• BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
• Crane Ind O-Ring (Mil-Spec)
• Black Extractor Insert

The BCM Extractor Spring is a heavy coil design made for the increased extractor tension required on many AR15, M4, M16 short barreled rifles. This product also improves the reliability on a standard 16" and 14.5" carbines.

As with all BCM branded products, the highest quality is the primary focus. Our BCM Extractor Spring is manufactured by a 9001:2000 facility employing the latest precision equipment. BCM starts with only the highest quality chrome silicon material, heat treats to stress relieve the product and shot peens to add increased strength.

This kit also includes the new black extractor insert, standard on all M4, M4A1, Mk18 carbines and the recent new standard on M16A4 rifles. The BCM Extractor Spring is so strong the Mil-Spec Crane O-Ring will probably not be needed, but it is included.

This kit includes:

• BCM Extractor Spring (chrome silicon, heat treated & stress relieved, shot peened)
• Crane Ind O-Ring (Mil-Spec)
• Black Extractor Insert

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 0-5.56.

• Exterior dimensions consistent with Mil-specs for mounting flash hider mounted suppressors.
• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Designed to have much less side blast and noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Nitride treated for maximum corrosion resistance
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 1/2 x 28 for 5.56mm AR15 platforms.

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 1-5.56

• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Predrilled hole at the base for permanent installation.
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 1/2 x 28 for 5.56mm AR15 platforms.

Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer"s wrench or box wrench is too thick.

Extended version of the BCMGUNFIGHTER MOD 0 - 5.56.

Mount per BATF specs to bring your 14.5 inch barrel over 16 inches (non-NFA)

This Compensator was not designed as a gamers comp. It was designed for tactical applications to reduce muzzle rise, flash signature, noise, and lateral pressure.

The BCMGUNFIGHTER Compensator Mod 1-7.62 / 300 AAC Blackout.

• Tuned slots and interior cone offer maximum in recoil mitigations, compensation of muzzle-rise, and flash reduction.
• Dual action brake minimizes side pressure and designed to have much less noise associated with typical compensators. Makes it perfect for working in teams for CQB. It is a compensator that is built for the 21st Century Gunfighter!
• Stainless Steel construction for maximum corrosion resistance
• Includes a Crush Washer
• Should be installed by a qualified armorer.

Threaded 5/8 x 24 for 7.62mm AR10 and many 300 AAC® Blackout® barrels.

Note: In order to install the muzzle device, you will need a "thin" wrench. A standard armorer"s wrench or box wrench is too thick.

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made in the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made in the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made in the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

Upon introduction of the M16 in the 1960s the manual of arms for shooting positions included a bladed stance with an extended elbow on the fire control side.

Because of numerous changes in the dynamics of the current fighting techniques we now virtually square off with the bad guy when engaging the target.

The Gun Fighter"s Grip by BCM allows for a reduced angle and improved ergonomics when shooting in the modern gun fighting stances.

Made In the USA

A Charging Handle for the 21st Century Gun Fighter
A NEW Charging Handle and Extended Latch System
Charging Handle forged from 7075 T6 Aluminum
Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
GFH - Mod 3B (large latch) and Mod 4B (medium latch)

The Mod 3B latch extends past the main body of the charging handle by approximately 1.14".
The Mod 4B latch extends past the main body of the charging handle by approximately .91".
For comparison a USGI handle latch extended past the main body of the charging handle by approximately .85"

A Charging Handle for the 21st Century Gun Fighter
A NEW Charging Handle and Extended Latch System
Charging Handle forged from 7075 T6 Aluminum
Hard Coat Anodized per Mil-A-8625F, Type III, Class 2
GFH - Mod 3B (large latch) and Mod 4B (medium latch)

The Mod 4B latch extends past the main body of the charging handle by approximately .91".
For comparison a USGI handle latch extended past he main boy of the charging handle by approximately .85"

Compatible with Mil-Spec AR-15 Direct Impingement Weapon Systems.
**NOT compatible with adjustable gas keyed bolt carrier groups.**

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.

Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.

Increasingly, this is the most common application when operating inside a vehicle.

2 different types of ambidextrous sling mounting options, including QD swivel sockets.

Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.

Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

United States Patent Number: 9,109,855

Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

United States Patent Number: 9,109,855

Bravo Company introduces the BCMGUNFIGHTERT Stock Assembly - Mod 0 - SOPMOD (Widebody).

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

United States Patent Number: 9,109,855

BCMGUNFIGHTER™ Stock Assembly - Mod 1 - SOPMOD (Widebody) Compartment

Strong and Lightweight for your mil-spec receiver extension.

BCMGUNFIGHTER™ Stock Assembly - Mod 1 - SOPMOD (Widebody) Compartment

Strong and Lightweight for your mil-spec receiver extension.

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

• The strongest light-weight polymer stock available for your mil-spec receiver extension is here!
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the most common application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth, Foliage Green, and Wolf Gray.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

As all BCM products, ALL parts are Made in the USA.

United States Patent Number: 9,109,855

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate

The strongest light-weight polymer stock available for your mil-spec receiver extension is here!

• More pronounced cheekweld (SOPMOD type)
• Snag free Design. No sharp edges prevent tangling of the rifle with the shooter"s sling, molle gear, or other kit.
• Modular VBOST (Vehicle Borne Operations Sling Tab) - This tab interfaces with the shooter"s riggers" band or bungee to secure the shooter"s sling against the stock when the carbine is not in use.
• Increasingly, this is the mostcommon application when operating inside a vehicle.
• 2 different types of ambidextrous sling mounting options, including QD swivel sockets.
• Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability.
• Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.
• Available in Black, Flat Dark Earth.

Also includes:

• BCM 7075T6 Mil-Spec Receiver Extension
• Locking Nut M4 (Castle)
• Mil-Spec Carbine Action Spring
• Carbine Buffer
• BCM QD Swivel Mount End Plate