Dark Hour Defense

Dark Hour Defense
View as List Grid

Items 1-50 of 51

Page
per page
Set Descending Direction
In Stock
  1. DH SSMD556 : MUZZLE DEVICE 1/2X28 FOR 5.56
    $93.97

    DarkHour exclusive muzzle device for the AR platform
    Available in 1/2x28 for 5.56 & 5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Melonite black finish for surface hardness and increased life span
    Efficient muzzle recoil reduction and faster follow up shots

    Learn More
  2. DH SSMD556 BLK : MUZZLE DEVICE 1/2X28 FOR 5.56 BLACK FINISH
    $93.97

    1/2x28 for 5.56
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Melonite black finish for surface hardness and increased life span
    Efficient muzzle recoil reduction and faster follow up shots
    Made in the USA

    Learn More
  3. DH SSMD762 : MUZZLE DEVICE 5/8X24 FOR 7.62/6.8
    $93.97

    DarkHour exclusive muzzle device for the AR platform
    5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Melonite black finish for surface hardness and increased life span
    Efficient muzzle recoil reduction and faster follow up shots

    Learn More
  4. DH SSMD762 BLK : MUZZLE DEVICE 5/8X24 FOR 7.62/6.8 BLACK FINISH
    $93.97

    5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Melonite black finish for surface hardness and increased life span
    Efficient muzzle recoil reduction and faster follow up shots
    Made in the USA

    Learn More
  5. DH3G556 : 3 GUN MUZZLE BRAKE 1/2X28 FOR 5.56
    $93.97

    DarkHour exclusive muzzle device for the AR platform
    3 Chamber design
    Available in 1/2x28 for 5.56 & 5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Available in raw stainless finish
    Efficient muzzle recoil reduction and faster follow up shots

    Learn More
  6. DH3G556 BLK : 3 GUN MUZZLE BRAKE 1/2X28 FOR 5.56 BLACK FINISH
    $97.73

    Constructed from 303 stainless steel
    3 Chamber design
    1/2x28 for 5.56
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    Available in raw stainless or melonite black finish
    Efficient muzzle recoil reduction and faster follow up shots
    Lifetime warranty and made in the USA

    Learn More
  7. DH3G7.62/6.8 : 3 GUN MUZZLE BRAKE 5/8X24 FOR 7.62/6.8
    $93.97

    DarkHour exclusive muzzle device for the AR platform
    3 Chamber design
    Available in 1/2x28 for 5.56 & 5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    303 stainless steel
    Available in raw stainless finish
    Efficient muzzle recoil reduction and faster follow up shots

    Learn More
  8. DH3G7.62/6.8BLK : 3 GUN MUZZLE BRAKE 5/8X24 FOR 7.62/6.8 BLACK FINISH
    $97.73

    Constructed from 303 stainless steel
    3 Chamber design
    5/8x24 for 7.62/6.8
    2.1 inches long and pre drilled for pin and weld for legal 14.5 to 16 inch length
    Available in raw stainless or melonite black finish
    Efficient muzzle recoil reduction and faster follow up shots
    Lifetime warranty and made in the USA

    Learn More
  9. DHBIPODKM : BIPOD MOUNT KEYMOD
    $48.85

    BIPOD Mount for all KEYMOD & MLOK Handguards
    Constructed from 7075 T6 Aluminum
    Type 3 mil-spec hard coat anodizing
    Use with Harris & Harris type clone BIPODS
    KEYMOD & MLOK options available
    Can be mounted from either direction
    Weights (with screws):  KEYMOD 16.5 grams/MLOK 21 grams
    American made with a lifetime warranty

    Learn More
  10. DHBIPODML : BIPOD MOUNT MLOK
    $52.63

    BIPOD Mount for all KEYMOD & MLOK Handguards
    Constructed from 7075 T6 Aluminum
    Type 3 mil-spec hard coat anodizing
    Use with Harris & Harris type clone BIPODS
    KEYMOD & MLOK options available
    Can be mounted from either direction
    Weights (with screws):  KEYMOD 16.5 grams/MLOK 21 grams
    American made with a lifetime warranty

    Learn More
  11. DHBKIT : AR15 BUFFER KIT
    Dark Hour Defense
    DHBKIT : AR15 BUFFER KIT
    $216.11

    Our Dark Hour Defense (DHD) AR15 Buffer Kit includes the following items:

    DHD 7075 T6 Aluminum 11 position Carbine buffer tube with Type 3 hardcoat black anodizing
    DHD 4140 alloy Quick Detach endplate with Melonite black finish (accepts Heavy Duty swivels)
    DHD 4140 alloy Castle nut with Melonite black finish
    Mil-Spec Carbine action spring
    Mil-Spec Buffer retainer
    Mil-Spec H1 Buffer
    Kit weighs 10.3 ounces

    Learn More
  12. DHBKIT308 : 308/A5 BUFFER KIT
    $253.69

    Our Dark Hour Defense (DHD) 308/A5 Buffer Kit includes the following items:

    DHD 7075 T6 Aluminum 13 position 308/A5 buffer tube with Type 3 hardcoat black anodizing
    DHD 4140 alloy Quick Detach endplate with Melonite black finish (accepts Heavy Duty swivels)
    DHD 4140 alloy Castle nut with Melonite black finish
    Mil-Spec Rifle action spring
    Mil-Spec Buffer retainer
    Mil-Spec H3 Buffer
    Kit weighs 12.8 ounces

    Learn More
  13. DHCARR556 : M16 CARRIER
    Dark Hour Defense
    DHCARR556 : M16 CARRIER
    $133.41

    Constructed from 8620 Alloy
    Mil-Spec Manganese Phosphate finish (aka Parkerize)
    Properly staked Mil-Spec carrier key
    Chrome lined bore
    100% MPI tested

    Learn More
  14. DHCBT : 7075 CARBINE 11 POSITION BUFFER TUBE
    $69.52

    11 position carbine lower extension buffer tube for your AR 15
    Weighs 3.7 oz
    Type 3 hard coat anodized
    Features a detent lock to prevent tube rotation and support carrier
    7075 T6 aluminum
    Fits mil spec stocks

    Learn More
  15. DHCBT2 : 7075 A5 13 POSITION BUFFER TUBE
    $78.94

    13 position 308/A5 lower extension buffer tube
    Weighs 3.9 oz
    Type 3 hard coat anodized
    Features a detent lock to prevent tube rotation and support carrier
    7075 T6 aluminum
    Fits mil spec stocks

    Learn More
  16. DHCH : AR-15 CHARGING HANDLE
    $52.63

    Forged 7075 T6 aluminum
    Type 3 hardcoat anodize
    For AR15 platform
    VSEVEN WEAPON SYSTEMS enhanced latch

    Learn More
  17. DHCN : CASTLE NUT
    Dark Hour Defense
    DHCN : CASTLE NUT
    $31.94

    AR 15 castle nut for collapsable stocks
    Machined out of 4140 alloy
    Black melonite finish
    Perfect compliment to a DARKHOUR endplate and lower extension

    Learn More
  18. DHGAS CAR : STAINLESS MELONITE GAS TUBE-CARBINE
    $37.59

    Mil-spec stainless gas tube
    Melonite black finish for a more durable & longer lasting life cycle

    Learn More
  19. DHGAS MID : STAINLESS MELONITE GAS TUBE-MID LENGTH
    $37.59

    Mil-spec stainless gas tube
    Melonite black finish for a more durable & longer lasting life cycle

    Learn More
  20. DHGAS PST : STAINLESS MELONITE GAS TUBE-PISTOL
    $37.59

    Mil-spec stainless gas tube
    Melonite black finish for a more durable & longer lasting life cycle

    Learn More
  21. DHGAS RIF : STAINLESS MELONITE GAS TUBE-RIFLE
    $37.59

    Mil-spec stainless gas tube
    Melonite black finish for a more durable & longer lasting life cycle

    Learn More
  22. DHGB : .750 SET SCREW GAS BLOCK-BLK
    $54.49

    .750 two screw lo pro gas block
    Gas block comes pre dimpled in correct location for pinning. Use 1/8 drill bit to pin
    Anti corrosive black melonite finish
    Machined out of 4140
    Better than mil spec without breaking the bank

    Learn More
  23. DHGSOD-17 : GLOCK STAND OFF DEVICE FULL SIZE
    $167.26

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Learn More
  24. DHGSOD-17CR : GLOCK STAND OFF DEVICE STANDARD SIZE W/COMP & RAIL
    $223.61

    Glock 17 9mm/.357 only (standard size)
    **Does not work with Gen 5 models.  No compatible holsters available at this time.  Black Label holster in the works.**

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!

    **Does not work with extended/threaded barrels**

    Learn More
  25. DHGSOD-19 : GLOCK STAND OFF DEVICE MID SIZE
    $148.46

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Learn More
  26. DHGSOD-19CR : GLOCK STAND OFF DEVICE COMPACT SIZE W/COMP & RAIL
    $204.82

    Glock 19 9mm/.357 only (compact size)
    **Does not work with Gen 5 models.  No compatible holsters available at this time.  Black Label holster in the works.**

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!

    **Does not work with extended/threaded barrels**

    Learn More
  27. DHGSOD-22CR : GLOCK STAND OFF DEVICE STANDARD SIZE W/COMP & RAIL
    $223.61

    Glock 22/31 40cal (standard size)
    **Does not work with Gen 5 models.  No compatible holsters available at this time.  Black Label holster in the works.**

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!

    **Does not work with extended/threaded barrels**

    Learn More
  28. DHGSOD-23CR : GLOCK STAND OFF DEVICE COMPACT SIZE W/COMP & RAIL
    $204.82

    Glock 23/32 40cal (compact size)

    **Does not work with Gen 5 models.  No compatible holsters available at this time.  Black Label holster in the works.**

    This model features an integrated muzzle brake/compensator
    The compensator top ports keep the pistol flip to a minimum and reduce recoil while the added side ports reduce the felt recoil even further
    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize (Black only)

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!

    **Does not work with extended/threaded barrels**

    Learn More
  29. DHLC556 BLK : LINEAR COMP 1/2X28 FOR 556 BLACK FINISH
    $150.32

    Constructed From 416 Stainless Steel
    Muzzle device is designed for CQB type weapons
    Can be used with any barrel length
    Directs muzzle blast and sound signature forward, away from the shooter
    The Linear Comp moderately suppresses flash & reduces recoil
    Diameter 1.25" tucks nicely into most rails/handguards
    Overall length 2.6" which adds approx. 2.05" to the overall firearm length
    Both sizes weigh 5 ounces
    1/2 X 28 for 5.56
    5/8 X 24 For all calibers up to .338"
    Melonite black finish
    Item ships with crush washer
    Lifetime Warranty
    American Made

    Learn More
  30. DHLC7.62/6.8 BLK : LINEAR COMP 5/8X24 FOR 7.62/6.8 BLACK FINISH
    $150.32

    Constructed From 416 Stainless Steel
    Muzzle device is designed for CQB type weapons
    Can be used with any barrel length
    Directs muzzle blast and sound signature forward, away from the shooter
    The Linear Comp moderately suppresses flash & reduces recoil
    Diameter 1.25" tucks nicely into most rails/handguards
    Overall length 2.6" which adds approx. 2.05" to the overall firearm length
    Both sizes weigh 5 ounces
    1/2 X 28 for 5.56
    5/8 X 24 For all calibers up to .338"
    Melonite black finish
    Item ships with crush washer
    Lifetime Warranty
    American Made

    Learn More
  31. DHMPSOD2.0 : M&P 2.0 STAND OFF DEVICE
    $167.26

    The MPSOD 2.0 is compatible with the following Smith & Wesson models ONLY:     M&P 2.0
    No holster currently available.

    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize black finish

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!
    **Does not work with extended/threaded barrels**

    Learn More
  32. DHMPSOD2.0R : M&P 2.0 STAND OFF DEVICE W/RAIL
    $186.05

    The MPSOD 2.0 is compatible with the following Smith & Wesson models ONLY:     M&P 2.0
    No holster currently available.

    Designed to keep slide in battery to allow proper discharge if pressed against a solid object/target
    Made from 7075 T6 aluminum
    Mil-Spec Type 3 hardcoat anodize black finish

    Install device with blue thread locker on mounting screws.
    All screws should be tightened to NO MORE than 15-20 inch pounds!
    This model is available with an accessory rail to mount a flashlight. 

    **Does not work with extended/threaded barrels**

    Learn More
  33. DHQDE : QD ENDPLATE
    Dark Hour Defense
    DHQDE : QD ENDPLATE
    $48.85

    AR 15 QD endplate for collapsable stocks
    Black melonite finish
    Machined out of strong durable 4140 alloy
    Accepts heavy duty swivel
    Perfect compliment to a DARKHOUR castle nut and lower extension

    Learn More
  34. DHQDE-ALU : 7075 ALUMINUM QD ENDPLATE
    $37.59

    AR15/308/DPMS/SR25 QD endplate for collapsible stocks

    Black Type III hard coat anodized finish

    Machined out of lightweight 7075 T6 aluminum

    Accepts heavy duty swivel

    A perfect compliment to a DARKHOUR castle nut and lower receiver extension

    Learn More
  35. DHTDPINS303 : STAINLESS TAKEDOWN/PIVOT PINS
    $19.76

    For AR15
    Constructed from 303 stainless
    Guaranteed against corrosion
    Raw stainless finish
    Weighs 14 grams

    Learn More
  36. DHTDPINS303BLK : STAINLESS TAKEDOWN/PIVOT PINS BLACK FINISH
    $25.36

    For AR15
    Constructed from 303 stainless
    Guaranteed against corrosion
    Raw stainless finish
    Lifetime warranty
    Made in America
    Weighs 14 grams

    Learn More
  37. DLITE 11ML : DARKLITE MAGNESIUM M-LOK AR15 HANDGUARD 11"
    $366.45

    HANDGUARD FEATURES:

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 

    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.

    M-LOK DESIGN FOR AR-15 PLATFORM

    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    11.1" LENGTH: 11.1 IN   WIDTH: 1.5 IN   HEIGHT: 1.97 IN

    WEIGHS APPROX. 5.0 OZ

    BARREL NUT FEATURES:

    SUPER ALUMINUM 7068; SIGNIFICANTLY HARDER & STRONGER THAN 7075 ALUMINUM

    TYPE III HARDCOAT ANODIZED BLACK

    SHIPS WITH WRENCH & MOUNTING SCREWS (TORX T25)

    WEIGHS APPROX. 1.13 OZ

    INCLUDED IN RAIL PURCHASE

    DarkLite magnesium handguard barrel nut interface tolerance is tighter and handguard may need to be tapped on with a plastic/rubber hammer.  Light heat from a heat gun can also ease installation.

    Learn More
  38. DLITE 13.5ML : DARKLITE MAGNESIUM M-LOK AR15 HANDGUARD 13.5"
    $394.64

    HANDGUARD FEATURES:

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 

    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.

    M-LOK DESIGN FOR AR-15 PLATFORM

    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    13.5" LENGTH: 13.5 IN   WIDTH: 1.5 IN   HEIGHT: 1.97 IN

    WEIGHS APPROX. 6.1 OZ

    BARREL NUT FEATURES:

    SUPER ALUMINUM 7068; SIGNIFICANTLY HARDER & STRONGER THAN 7075 ALUMINUM

    TYPE III HARDCOAT ANODIZED BLACK

    SHIPS WITH WRENCH & MOUNTING SCREWS (TORX T25)

    WEIGHS APPROX. 1.13 OZ

    INCLUDED IN RAIL PURCHASE

    DarkLite magnesium handguard barrel nut interface tolerance is tighter and handguard may need to be tapped on with a plastic/rubber hammer.  Light heat from a heat gun can also ease installation.

    Learn More
  39. DLITE 13.5ML308 : DARKLITE MAGNESIUM M-LOK 308 HANDGUARD 13.5"
    $479.17

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 
    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.
    M-LOK design for the 308 DPMS Standard/High platform
    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    Learn More
  40. DLITE 15ML : DARKLITE MAGNESIUM M-LOK AR15 HANDGUARD 15"
    $422.82

    HANDGUARD FEATURES:

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 

    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.

    M-LOK DESIGN FOR AR-15 PLATFORM

    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    15.0" LENGTH: 15.0 IN   WIDTH: 1.5 IN   HEIGHT: 1.97 IN

    WEIGHS APPROX. 6.7 OZ

    BARREL NUT FEATURES:

    SUPER ALUMINUM 7068; SIGNIFICANTLY HARDER & STRONGER THAN 7075 ALUMINUM

    TYPE III HARDCOAT ANODIZED BLACK

    SHIPS WITH WRENCH & MOUNTING SCREWS (TORX T25)

    WEIGHS APPROX. 1.13 OZ

    INCLUDED IN RAIL PURCHASE

    DarkLite magnesium handguard barrel nut interface tolerance is tighter and handguard may need to be tapped on with a plastic/rubber hammer.  Light heat from a heat gun can also ease installation.

    Learn More
  41. DLITE 15ML308 : DARKLITE MAGNESIUM M-LOK 308 HANDGUARD 15"
    $498.00

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 
    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.
    M-LOK design for the 308 DPMS Standard/High platform
    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    Learn More
  42. DLITE 16.5ML308 : DARKLITE MAGNESIUM M-LOK 308 HANDGUARD 16.5"
    $535.55

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 
    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.
    M-LOK design for the 308 DPMS Standard/High platform
    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    Learn More
  43. DLITE 18ML308 : DARKLITE MAGNESIUM M-LOK 308 HANDGUARD 18"
    $573.14

    Manufactured from a blended aluminum & magnesium alloy.  Approximately 30% reduction in material weight compared to commonly used 6061 aluminum. 
    Wear layer is a plasma deposition process that provides a tough ceramic-like coating with superior wear resistance compared to anodizing. E-cote black finish.
    M-LOK design for the 308 DPMS Standard/High platform
    SLIM DESIGN with an ID of 1.3"(left to right) & 1.55" (top to bottom for gas block clearance)

    Learn More
View as List Grid

Items 1-50 of 51

Page
per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.