Shotshell Components

View as List Grid

14 Items

per page
Set Descending Direction
In Stock
  1. $8.31

    209 PREMIER® STS® PRIMERS

    Extensive testing with a variety of commonly-used reloading powders has shown that 209 Premier STS primers, compared to other commonly-used primers, create reductions of up to 40 percent in the high-to-low spread of velocities in reloads. This improvement in velocity consistency is an important benefit to those reloading target loads for practice or competition.

    Packed 100 Per Box, 10 Boxes Per Brick, 5 Bricks Per Case, 5000 Per Case

    The most consistent primer available
    Premier STS primers reduce shot to shot velocity variations up to 40 percent in reloads
    Premier STS primers can be substituted for Remington"s previous 209 primers without changes in published reloading formulas
    Hot-burning, non mercuric and non-corrosive mixture ensures completepowder burn and clean barrel
    Remington primers feature all-brass primer cup and brass platedbattery cup, with covered flash hole

    Learn More
  2. 24338 : RXP12 SHOTSHELL WADS - TARGET - POWER PISTON ONE-PIECE 12GA 1-1/8 oz
    $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  3. $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  4. 24344 : RXP20 SHOTSHELL WADS - TARGET - POWER PISTON ONE-PIECE 20GA 7/8 oz
    $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  5. 24346 : TGT12S SHOTSHELL WADS - TARGET - POWER PISTON ONE-PIECE 12GA 1 oz. 1-1/8 oz
    $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  6. 24352 : SP410 SHOTSHELL WADS - TARGET - POWER PISTON ONE-PIECE 410 Bore 1/2 oz
    $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  7. $21.96

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  8. 24378 : SP20S SHOTSHELL WADS - HUNTING - POWER PISTON ONE-PIECE 20GA 1 oz
    $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  9. $25.75

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  10. $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  11. $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  12. $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  13. $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
  14. $15.00

    Our one-piece shot cup / wad columns remain the unmatched choice for everything from heavy, 10 gauge magnums to the lightest small-bore target loads - including the .410. And for critical 12-gauge clay target loads, our exclusive Figure 8™ wad belongs on every reloading bench. For 1-oz. 12-gauge loads, use our volume calibrated TGT-12 wad. Both the Figure 8 and TGT-12 wads now feature a new stitched petal design that helps keeps wads separated for easier reloading and are interchangeable with the older non-stitched versions.

    Learn More
View as List Grid

14 Items

per page
Set Descending Direction
In Stock
*Estimated delivery could vary on some products.
© 2020 Gravel Agency Store. All Rights Reserved.